armscor hi-cap... what series?? [Archive] - Glock Talk

PDA

View Full Version : armscor hi-cap... what series??


MRV_G17
08-05-2007, 09:15
tanong ko lang ko kung anong series ang armscor practical series hi-cap (45cal/9mm).
70 or 80 series? :)

9MX
08-06-2007, 04:37
pards, i think i overheard mcoliver et. al years ago..mentioning its series 70

MRV_G17
08-06-2007, 04:47
thanks for the reply 9MX :)

willie (of armscor) confirmed that its a 70 series.

meron kasi ako project na 9mm Hi-Cap eh. advance xmas gift ko sa sarili ko :)

gagayahin ko spartan setup then meron parts akong papalitan na pang 70 and 80 series. hehehe first timer ng 1911 eh. :banana:

BTW, hi-cap ba yung samscor project mo? like your samscor, STI trigger din kasi gusto ko gamitin eh :)

9MX
08-06-2007, 08:29
Originally posted by MRV_G17

BTW, hi-cap ba yung samscor project mo? like your samscor, STI trigger din kasi gusto ko gamitin eh :)

yep, hi-cap ang "STI" killer ko:supergrin:

i followed mco's suggestion to use the following armscor parts:

ejector,MSH, beaver tail, ambi-safety (col bayang modified it ala swenson)

for hammer strut, and mainspring cap - don't use titanium,maganit siya.

sear/hammer/disconnector - EE
pin set - EGW

front sight - i should have listened to mco, maganda ang microdot ni col bayang;)

binoy
08-06-2007, 08:46
mannix,

do you have any pic of the microdot? Im planning to change the stock fs of my 16-40. TY

9MX
08-06-2007, 08:59
Originally posted by binoy
mannix,

do you have any pic of the microdot? Im planning to change the stock fs of my 16-40. TY

unfortunately, wala dude. but i've seen it in the flesh, mukhang siyang imported except for the price. yan ang gamit ni mco, alam mo naman si kalikot, dapat matibay ang gamit para tumagal sa kanya:animlol:

mikol
08-06-2007, 23:28
pre any update on shooters slide?
wala pa ba crack? ;) ;) :)

MRV_G17
08-06-2007, 23:53
pards, baka pwede post mo nga uli yung pic ng samscor mo. di ko ma-search sa mga post eh.

naku po... gastos na naman to! alibi ko na lang kay misis na advance christmas gift ko sa sarili ko ;)

Originally posted by 9MX
yep, hi-cap ang "STI" killer ko:supergrin:

i followed mco's suggestion to use the following armscor parts:

ejector,MSH, beaver tail, ambi-safety (col bayang modified it ala swenson)

for hammer strut, and mainspring cap - don't use titanium,maganit siya.

sear/hammer/disconnector - EE
pin set - EGW

front sight - i should have listened to mco, maganda ang microdot ni col bayang;)

9MX
08-07-2007, 00:06
Originally posted by mikol
pre any update on shooters slide?
wala pa ba crack? ;) ;) :)

i'm now at 3,000 rounds using a load of 4.2gr-N320,200 gr teflon head, no shock buffs. so far so good.:thumbsup:

no shock buffs,

mikol
08-07-2007, 00:20
Originally posted by 9MX
i'm now at 3,000 rounds using a load of 4.2gr-N320,200 gr teflon head, no shock buffs. so far so good.:thumbsup:

no shock buffs,
i think it's time to have a samscor 2nd gen cal 40 na.:)
magkano na nga ba price ng armscor frame ngayon? :supergrin: ;)

9MX
08-07-2007, 01:17
Originally posted by mikol
i think it's time to have a samscor 2nd gen cal 40 na.:)
magkano na nga ba price ng armscor frame ngayon? :supergrin: ;)

if available, the frame would sell for about 8.5k ata. those are rejects pards, may mga minor flaws so dapat matinik ang gunsmith magbuild up.

mikol
08-07-2007, 01:52
Originally posted by 9MX
if available, the frame would sell for about 8.5k ata. those are rejects pards, may mga minor flaws so dapat matinik ang gunsmith magbuild up.
no problema sa gunsmith pre.
meron kami magaling na gunsmith sa cebu, si bosing mario abangan.
siya ang pinaka col. bayang doon sa Cebu. :thumbsup:

bmag
08-07-2007, 06:50
Originally posted by mikol
no problema sa gunsmith pre.
meron kami magaling na gunsmith sa cebu, si bosing mario abangan.
siya ang pinaka col. bayang doon sa Cebu. :thumbsup:

Hello Mikol, baka pwede maki-arbor ng contact number ni smith mario abangan?

TY.

binoy
08-07-2007, 08:01
Originally posted by 9MX
unfortunately, wala dude. but i've seen it in the flesh, mukhang siyang imported except for the price. yan ang gamit ni mco, alam mo naman si kalikot, dapat matibay ang gamit para tumagal sa kanya:animlol:

:laughabove: :thumbsup: :thumbsup: :animlol:

mikol
08-07-2007, 09:02
Originally posted by bmag
Hello Mikol, baka pwede maki-arbor ng contact number ni smith mario abangan?

TY.
sorry pre wala ako number sa kanya.
try to pm cebuboy baka alam nya number ni mario.
cebu base ka rin ba bmag? hook up ka nalang ki cebuboy.:)