Need help on Armscor Cal .40 [Archive] - Glock Talk

PDA

View Full Version : Need help on Armscor Cal .40


colt4ever
10-02-2007, 11:36
Hi guys! i need some help in upgrades on a .40 cal. armscor high-cap. what are the right parts for this if i would replace the internal parts with top brands (ed brown, sti, C&S, etc.)and which ones would be the right parts for it? (is it for a 9mm/38 super or .45 parts)?

ess45
10-02-2007, 11:49
You need to change your username too. :supergrin:

dnotrex
10-02-2007, 18:58
Originally posted by ess45
You need to change your username too. :supergrin:

:rofl: thats a good start!

Chie
10-02-2007, 20:49
Originally posted by colt4ever
Hi guys! i need some help in upgrades on a .40 cal. armscor high-cap. what are the right parts for this if i would replace the internal parts with top brands (ed brown, sti, C&S, etc.)and which ones would be the right parts for it? (is it for a 9mm/38 super or .45 parts)?

get a C&S drop in kit consisting of the following (hammer, sear, strut and disconnector), sti sear spring, xl firing pin and a tungsten guide rod and your ready to rock! it would also be good to get a bomar installed and a f.o. front sight too. :supergrin:

most of the parts are built for a 1911 platform, you can use it for all calibers mentioned.

9MX
10-02-2007, 20:58
forget about the tungsten guide rod. have col bayang do the longdust on your blaster, he can make a guide rod for you as well as a microdot front sight

revo
10-02-2007, 21:19
doesn't this interchange with a Para P-16 ?

ess45
10-02-2007, 21:42
His location is California.

For the receiver, the parts are the same except for the ejector (38 super)

For the slide, extractor and firing pin for 38 super, preferably series 70 for the extractor(i think Armscor is series 70).
Firing pin stop by EGW (oversize, for 40) square corner.

Chie
10-02-2007, 22:02
Originally posted by 9MX
forget about the tungsten guide rod. have col bayang do the longdust on your blaster, he can make a guide rod for you as well as a microdot front sight

+1 if you can bring your pistol to col. bayang :supergrin:

vega
10-02-2007, 23:29
Akala ko wala ka pang baril?:headscratch:

New_comer
10-03-2007, 05:43
Originally posted by 9MX
forget about the tungsten guide rod. have col bayang do the longdust on your blaster, he can make a guide rod for you as well as a microdot front sight
Saan shop nya?

Allegra
10-03-2007, 06:04
Originally posted by colt4ever
Hi guys! i need some help in upgrades on a .40 cal. armscor high-cap. what are the right parts for this if i would replace the internal parts with top brands (ed brown, sti, C&S, etc.)and which ones would be the right parts for it? (is it for a 9mm/38 super or .45 parts)?

Whats wrong w. the stock parts?

batangueno
10-03-2007, 06:31
Go to shooters connection website then buy these parts.

- Extreme Engineering hammer/sear/disconnector kit
- Dawson Precision Sear Spring (already prep'd)
- STI titanium hammer strut
- ISMI 17lb main spring
- Aftec Extractor

glockiz
10-03-2007, 07:02
armscor stock parts are good, if you want mods, heres my recommendations, basic mods:
- install of fiber optic front sight (fixed novak like rear sight is good)
- install flgr with reverse plug
- install magwell
- install basepads in magazines
- have a trigger job
and more to go hehehe

colt4ever
10-03-2007, 16:40
Originally posted by vega
Akala ko wala ka pang baril?:headscratch:

Hehehe! dito sa CA wala pa akong baril sa pinas meron sir vega at yung armscor ay nasa pinas! my brother-in-law sold it( armscor .40) to me, (transfer it to me when i get back) kaya when i get back sa pinas (early next year) i'll try to work on it(as i have mentioned, replace the parts, that's why i need opinions for it since it's my first time to acquire a non-colt firearm and definitely i won't change my username cause i'm still am a colt fan! hehe! thanks for all your inputs guys and keep on coming! cause i need it!

glockiz
10-03-2007, 21:59
Originally posted by glockiz
armscor stock parts are good, if you want mods, heres my recommendations, basic mods:
- install of fiber optic front sight (fixed novak like rear sight is good)
- install flgr with reverse plug
- install magwell
- install basepads in magazines
- have a trigger job
and more to go hehehe

when your home, bring your unit to col bayang, discuss to him what you want and he can make it for you. highly recommended.
heres my armscor cal 40 hicap, mods made by the good colonel:
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04922.jpg
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04947.jpg
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04949.jpg
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04920.jpg
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04909.jpg
hers stock armscor cal 40 hicap for comparison
http://i188.photobucket.com/albums/z270/phothobucket_2007/564621243_629303a3fa_o.jpg

hope this helps

batangueno
10-04-2007, 07:07
Dito pala sa pilipinas eh. My new suggestion is for you to follow glockiz route. :)

vega
10-04-2007, 08:11
Originally posted by glockiz
when your home, bring your unit to col bayang, discuss to him what you want and he can make it for you. highly recommended.
heres my armscor cal 40 hicap, mods made by the good colonel:
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04909.jpg
hope this helps
No offense but someone is using the wrong size screw driver. Sayang ang pa-modify.

atmarcella
10-04-2007, 08:17
galing ng mata mo sir:animlol:

vega
10-04-2007, 08:22
Originally posted by atmarcella
galing ng mata mo sir:animlol:
HEHEHE, may kakilala ako ganyan din ang ginawa sa grip screw kaya alam na alam ko.

glockiz
10-04-2007, 09:07
the screw scratch is my fault, i removed the grip cover during one range session coz i like the feel of the grip without the grip cover, it feels so comfortable with my hand. i replaced back the grip cover just for the photoshoot but i dont think a matter of small scratch in the screw can ruin the entire modifications.

my 1 cent please

atmarcella
10-04-2007, 09:38
glockiz,

from mindy ka? pano mo pnapagawa ke bayang yan? LBC?

glockiz
10-04-2007, 14:22
Originally posted by atmarcella
glockiz,

from mindy ka? pano mo pnapagawa ke bayang yan? LBC? yep am from mindy, cotabato city in particular. i bought the armscor cal 40 directly from the colonel (brand new) thenhad him made the mods before i finally have it. he sent to me the unit through PAL cargo.

colt4ever
10-07-2007, 17:24
Originally posted by glockiz
when your home, bring your unit to col bayang, discuss to him what you want and he can make it for you. highly recommended.
heres my armscor cal 40 hicap, mods made by the good colonel:
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04922.jpg
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04947.jpg
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04949.jpg
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04920.jpg
http://i188.photobucket.com/albums/z270/phothobucket_2007/DSC04909.jpg
hers stock armscor cal 40 hicap for comparison
http://i188.photobucket.com/albums/z270/phothobucket_2007/564621243_629303a3fa_o.jpg

hope this helps


very nice sir! is it possible also to convert it to a .45?

vega
10-07-2007, 20:40
Het colt4ever - Did you call 2nd Ammendment yet?

glockiz
10-08-2007, 05:19
@colt4ever

i think it can be converted to cal 45 but you have to change the barrel and the slide maybe. i suggest join the pinoyguns.com, col bayang has his own thread there. you can ask him anything about modifications you want to your unit.