Bought a Lorcin

[Gerard LeDouche]

Got a fair deal on a .380 Lorcin, only paid $250 with tax and a box of Wolf ammo.

What do you think?

I am only gonna keep this in my car in case I have some trouble, I don't feel comfortable carrying it yet.

Besides, I don't think I can take it into my favorite club.

[thorn137]

Got a fair deal on a .380 Lorcin, only paid $250 with tax and a box of Wolf ammo.

What do you think?


I think you wasted $250.

thorn

[12131]

You got ripped.

Btw, welcome.

[MCPreacher]

I think you got ripped off. They should have paid YOU to take that peice of crud off their hands.

I never understood why people would waste good money on bad guns.

I know, I know, opinions are like buttholes....

[chowchow]

IMHO a surplus CZ82 from AIMs is a good buy and a more quality gun too.

[12131]

If you're gonna use a gun to defend your life, better get a reliable one.

[vafish]

First post?

Screen name Gerard LeDouche (Jerry the douche?)

Nahh he couldn't be a troll.


Could he?

[gjk5]

Got a fair deal on a .380 Lorcin, only paid $250 with tax and a box of Wolf ammo.





I'm sorry.

[Gerard LeDouche]

Well, I am going to take it to the range tomorrow since I am off for the week.

If I have problems with it, I have a warranty to fall back on.

Lorcin is a solid company, right?

The lady at the gun store said they sell a lot of them with 0 problems.

vafish, no, no troll here. I have seen enough of those jacklegs on my gamer sites. lol

Something tells me I should have come here first, but I was so excited with the purple grips on this one. I thought about getting 2, but I don't get paid until the end of the month and with a baby on the way $$$ is tight.

[12131]

Lorcin, Jennings, Phoenix, Raven, Jimenez. Run like hell away. We're here to help you out, if you're new to guns. "The lady at the store" is trying to make money off you.

[Baron-von-Glock]

First post?

Screen name Gerard LeDouche (Jerry the douche?)

Could he?

If you're wrong, that may be the most insulting observation I've seen in awhile. Nicely done, either way. Baron

[jawjaboy]

http://i56.photobucket.com/albums/g194/jawjaboy/crackhead.jpg

[osiruscyn]

I think you need to make it your primary weapon for defense and carry weapon as well.

Very nice purchase. Good job on the price.

[SnakeEater]

Something tells me I should have come here first, but I was so excited with the purple grips on this one.
You did good. Those purple grips are a collectors item. Lorcin is a top notch company, don't listen to these guys. I carry two of them in a dual shoulder rig.

[younggun22]

lorcin is a great company and dont let any one tell you different






























Just kidding you bought a piece of dog ***** at a ridicuously high price

[XNDR17C]

First post?

Screen name Gerard LeDouche (Jerry the douche?)

Nahh he couldn't be a troll.


Could he?

When I saw this, I laughed so hard I literally fell off my chair!

[Gerard LeDouche]

You did good. Those purple grips are a collectors item. Lorcin is a top notch company, don't listen to these guys. I carry two of them in a dual shoulder rig.



Training Day style?

:devilish:

[BigEd63]

Normaly it's also called a New York reload but in the case of a pistol with them color grips maybe a San Fransisco one?

[tercel89]

I know that everybody has to start somewhere but you cant tell me that this guy is for real. If he found this Glock forum then he could have did some research and knew that Lorcins are junk. And if he bought a Lorcin , why did he come to a Glock forum? IDIOT!!!!! YOu could have saved $100 more and bought a good used GLock . Hell for $199 you could have gotten a military surplus CZ-82 in 9x18 Mak that woukld be practicly new with a little cosmoline on it and its as relaible as Glock.

[Cobra64]

Got a fair deal on a .380 Lorcin, only paid $250 with tax and a box of Wolf ammo.

I am only gonna keep this in my car in case I have some trouble. My condolences. I think you're already in trouble.

[Cobra64]

Well, I am going to take it to the range tomorrow since I am off for the week.

If I have problems with it, I have a warranty to fall back on.

Lorcin is a solid company, right?

he lady at the gun store said they sell a lot of them with 0 problems.

Something tells me I should have come here first, but I was so excited with the purple grips on this one. I thought about getting 2, but I don't get paid until the end of the month and with a baby on the way $$$ is tight.

Should have saved up another $100 and picked up one of these.

http://i24.photobucket.com/albums/c2/Davis1950/Weapons/Glock/GlockPimp.jpg

[MCPreacher]

Should have saved up another $100 and picked up one of these.

http://i24.photobucket.com/albums/c2/Davis1950/Weapons/Glock/GlockPimp.jpg

Thanks, now I have to go and scrub my eyes with drano....

[BigEd63]

I always wanted to know what type of Glock the S.F. Califonia PD carried.

Now sadly I think I do.

[Lyptix]

http://i56.photobucket.com/albums/g194/jawjaboy/crackhead.jpg

+1


LOL!

Someones feet smell, and they aren't mine.

[eddief4]

could you post a pic of what it looks like....cause for your sake i hope i'm wrong and it dosn't look like this.. http://gunbroker.com/Auction/ViewItem.asp?Item=85354157

[crankbait11]

You do know hi-points are only $100 right??? I think they function for the most part, which is probablly more than you can expect from lorcin. Good luck with that warranty also. Heres an interesting read about some of the history associated with that great firearms manufacturer.http://www.vpc.org/studies/deadstan.htm

[MCPreacher]

could you post a pic of what it looks like....cause for your sake i hope i'm wrong and it dosn't look like this.. http://gunbroker.com/Auction/ViewItem.asp?Item=85354157

The "Buy it now" price of $89.00 tells the whole story there....

[madecov]

This has to be someone who is a regular here and re registered under that name just for fun.

[eddief4]

The "Buy it now" price of $89.00 tells the whole story there....

.....YEP......

[James Markov]

I bought a gently used(mint condition) Bulgarian Makarov for 125 bucks at Gander Mountain-and they are sometimes known for high prices. A Lorincin is worth about 100 bucks-but you will have a much better time getting a High point for that price-they are suprisingly reliable(Hi-Points) with ball ammo. What the heck...you are pulling our chain anyway.

[ndbullet500]

Dude, I paid $249 for mine in .22 short with pink plaid grips. Nice buy. Did your's come with sights?

[USDefender]

I think you wasted $250.

thorn


+1

I traded a rusty little Beretta Bobcat .22 for a Lorcin .380 once, and I KNOW that it was one of the more stupid moves that I've ever made.

Take this VERY GOOD ADVICE, please: Take the gun back, get your money back, and buy a Bersa or something. Anything...and I repeat ANYTHING would just about be a better purchase.

[itstime]

Before everybody badmouths this guy, it's of little known fact that the purple grip model of these is the laser gripped version. ;)

[jdeere_man]

Yes this post should have been in the SNS forum. I'm not sure it would make a good anchor.



Besides, I don't think I can take it into my favorite club.

I can see why they'd ban them.

[standerson]

Did you at least get kissed afterwards?

[vafish]

Did you at least get kissed afterwards?

More importantly,

Did they use a condom?

[bhp9mm]

very nice gun lol

[texasheat16]

I smell a TROLL!!!!!!!!!!!!!!!!!!!! c'mon LeDouche? I gotta admit this was a pretty humorous thread!

[-gunut-]

I remember I was in a gun shop in Vegas when some guy asked about a used Lorcin behind the counter.

Customer "Would this be a good gun to get my wife for defense?"

Employee "Not if you love her"

nuf said lol

[Gerard LeDouche]

ok, THIS THING ROCKED!!

I was able to make it through the whole box with about 4 jams, but it was getting better before I ran out of ammo.

I have ordered a couple more mags....what would you guys recommend for defensive ammo?

And no, I am not a troll. Someone suggested I come here since this place has a rep for a wealth of knoledgge. We'll see about that.

Anyway, what would be a good holster? The lady at the store suggested an Uncle Mike's in the pants holster. Anyone have any experience with it? I can get it for $25 since I am a repeat customer.

[CBennett]

ok, THIS THING ROCKED!!

I was able to make it through the whole box with about 4 jams, but it was getting better before I ran out of ammo.

I have ordered a couple more mags....what would you guys recommend for defensive ammo?

And no, I am not a troll. Someone suggested I come here since this place has a rep for a wealth of knoledgge. We'll see about that.

Anyway, what would be a good holster? The lady at the store suggested an Uncle Mike's in the pants holster. Anyone have any experience with it? I can get it for $25 since I am a repeat customer.

For SD ammo id look into a BIG rock or maybe a hammer as it will ultimately be more reliable in a SD situation. as for a good holster id go with a trash can.

[12131]

Ok, now it's beyond help, if you're really not a troll. Either way, the entertainment value of this thread is beyond passed.

[moeman]

Can someone provide the link for the 25,000 round torture test of the 250 Lorcins used to get to 25,000 rounds?

What is safe for cleaning the zinc pipe they use for a barrel? Drano says it's safe for all pipes.

Can you really blue pot-metal?



Thanks!

[CajunBass]

Are they even in business anymore?

[BigEd63]

You know how when you buy a Glock or a Sig you sometimes get a cool sticker like: "Got Sig?" or "Glock perfection".

When you buy something like a Lorcin do you get ones like: "Pimpin' Ain't Easy" or "Got Crack?",?

[osiruscyn]

ok, THIS THING ROCKED!!

I was able to make it through the whole box with about 4 jams, but it was getting better before I ran out of ammo.

I have ordered a couple more mags....what would you guys recommend for defensive ammo?

And no, I am not a troll. Someone suggested I come here since this place has a rep for a wealth of knoledgge. We'll see about that.

Anyway, what would be a good holster? The lady at the store suggested an Uncle Mike's in the pants holster. Anyone have any experience with it? I can get it for $25 since I am a repeat customer.

I don't know if you can find it, but go to a gun show, and see if any of the guys carry "Black Talon" ammo. They don't make it anymore because of it's ability to penetrate body armor and level iV plates, even in a .380. It is worth it's weight in gold. Buy as much of it as you can. That is THE best SD ammo out there for it.

I wouldn't go with the uncle mikes. It's cheaply made and doesn't do the gun justice. I would contact Milt Sparks or a guy in your area who specializes in leather work and see if they can make you one. If you get one through milt sparks, tell them you want it styled after the versamax II. They might be able to dye it as well to match the grips, just a thought. But yeah, that is what i would do for a holster if i was you. A fine firearm like that deserves nothing but the best to be carried in.

[BigEd63]

A fine firearm like that deserves nothing but the best to be carried in.

In that case I think he needs one made from a material that compliments his gun's construction.

For a mere $750 I can make a slick CCW rig for him from laminated Wal-Mart plastic sacks.

Plus I'll be generous and throw in free shipping.

[moeman]

I don't know if you can find it, but go to a gun show, and see if any of the guys carry "Black Talon" ammo. They don't make it anymore because of it's ability to penetrate body armor and level iV plates, even in a .380. It is worth it's weight in gold. Buy as much of it as you can. That is THE best SD ammo out there for it.

I wouldn't go with the uncle mikes. It's cheaply made and doesn't do the gun justice. I would contact Milt Sparks or a guy in your area who specializes in leather work and see if they can make you one. If you get one through milt sparks, tell them you want it styled after the versamax II. They might be able to dye it as well to match the grips, just a thought. But yeah, that is what i would do for a holster if i was you. A fine firearm like that deserves nothing but the best to be carried in.

I'm thinking of getting a Jennings 25cal and send it to Italy for engraving by one of the masters. Since the Jennnings is only $104 I can use the savings toward a set of legal ivory handgrips and send it to Barsto for a match barrel.

What do you think would be a good engraving motiff?

I'm thinking hobo's and ho's on one side and the pimp hand on the other...

[CBennett]

In that case I think he needs one made from a material that compliments his gun's construction.

For a mere $750 I can make a slick CCW rig for him from laminated Wal-Mart plastic sacks.

Plus I'll be generous and throw in free shipping.

How much for one for my Glock 23 ive been looking for a custom CC holster

[Brass Nazi]

I recommend not using a holster, That way you might do yourself a favor and lose it.

[ndbullet500]

I don't know if you can find it, but go to a gun show, and see if any of the guys carry "Black Talon" ammo. They don't make it anymore because of it's ability to penetrate body armor and level iV plates, even in a .380. It is worth it's weight in gold. Buy as much of it as you can. That is THE best SD ammo out there for it.

I wouldn't go with the uncle mikes. It's cheaply made and doesn't do the gun justice. I would contact Milt Sparks or a guy in your area who specializes in leather work and see if they can make you one. If you get one through milt sparks, tell them you want it styled after the versamax II. They might be able to dye it as well to match the grips, just a thought. But yeah, that is what i would do for a holster if i was you. A fine firearm like that deserves nothing but the best to be carried in.

Well, I just learned that cheap beer not only tastes worse, it burns the sinuses more than a nicer ale. I have not yet tested nicer lagers in the sinuses.

Life is truly to short to drink...or exhale suddenly...cheap beer.

[James Markov]

I don't know if you can find it, but go to a gun show, and see if any of the guys carry "Black Talon" ammo. They don't make it anymore because of it's ability to penetrate body armor and level iV plates, even in a .380. It is worth it's weight in gold. Buy as much of it as you can. That is THE best SD ammo out there for it.

I wouldn't go with the uncle mikes. It's cheaply made and doesn't do the gun justice. I would contact Milt Sparks or a guy in your area who specializes in leather work and see if they can make you one. If you get one through milt sparks, tell them you want it styled after the versamax II. They might be able to dye it as well to match the grips, just a thought. But yeah, that is what i would do for a holster if i was you. A fine firearm like that deserves nothing but the best to be carried in.

Black Talon CANNOT penetrate soft body armor
http://www.firearmstactical.com/briefs12.htm

[texasheat16]

alright, I'll play along. Seriously, if you're looking for a inexpensive CCW check out a makarov or as many have stated before a cz-82. I've fired both jennings and lorcin firearms at the local gun range and experienced FTF, FTE several times. There is a reason they have a bad reputation for quality. Are you really going to trust your life to something that will likely fail on you?

[Gerard LeDouche]

You guys are hiliarious.

I will look into the Black Talons, are they expensive?

I saw a Pro Ordinance ? rifle that is plastic like Glocks, kinda neat and lightweight for $800, comes with a laser, case, and some mags.

[gjk5]

Black Talon CANNOT penetrate soft body armor
http://www.firearmstactical.com/briefs12.htm



sarcasm. the whole post was tongue in cheek.

[soundwave]

You guys are hiliarious.

I will look into the Black Talons, are they expensive?

I saw a Pro Ordinance ? rifle that is plastic like Glocks, kinda neat and lightweight for $800, comes with a laser, case, and some mags.

Jump on that dude. There was only 3 of those ever made. That thing will increase in value 10 fold in a year. Make sure batteries come with the laser though.

Don't you mean clips BTW?

[osiruscyn]

I'm thinking of getting a Jennings 25cal and send it to Italy for engraving by one of the masters. Since the Jennnings is only $104 I can use the savings toward a set of legal ivory handgrips and send it to Barsto for a match barrel.

What do you think would be a good engraving motiff?

I'm thinking hobo's and ho's on one side and the pimp hand on the other...


That probablly would be too difficult to do and you wouldn't be able to get good definition. A fancy engraving would be the best as you could carry it as a BBQ gun, especially if you get a real nice holster made with fine detailing and accents.

[osiruscyn]

You guys are hiliarious.

I will look into the Black Talons, are they expensive?

I saw a Pro Ordinance ? rifle that is plastic like Glocks, kinda neat and lightweight for $800, comes with a laser, case, and some mags.

They are going to be pricey, probablly about $60 for 50 of them, but trust me they are worth it. No other ammo out there can do the same as it can. The closest is probablly extreme shock ammo but it can only penetrate level IIA vests. However, there have been instances and cases where it caused spontaneous combustion upon impact of where you are shooting. In that case, that would be the preferred ammo for SD uses.

I don't believe i've ever heard of Pro Ordinance rifles before but there are other options out there if you are looking for a superior rifle or carbine. There is the Hesse line of rifles that are very well made

[tampashooters]

Hell, I got a chrome one for craps and giggles, it shoots good and I paid $70 NIB, but wouldn't pay over that for one.

And.... I won't take it out on the range, it's kinda like Porn and Apple Computers, everyone knows it's there, but no one wants to be seen with them, like the ugly friend.

[mastrbloata]

Are they even in business anymore?I didn't think so. I remember hearing an interview with the president of Lorcin on Rush Limbaugh in the late 90's after the company was sued into bankruptcy.

[BigEd63]

How much for one for my Glock 23 ive been looking for a custom CC holster

Sorry, but due to my proprietary no slip liner/retention system made of unobtainium I can only make them for Lorcin, Jennings, Brycos and Davis pistols.

With one exception for Glocks if you had one of those pure ceramic model 7's it would be possible.

[winddummy]

For that kind of money, how many more do you want. Years ago I use to buy them for $86.00 new, the 9mm was $127.00 and the .22 was $46.00. Don't be foolish and carry a round in the chamber, with a little wear on it and dropping it will cause it to go off. They went out of business because they coundn't meet safety standards and they had a huge problem with the inventory going out the back door.

[Andy W]

ok, THIS THING ROCKED!!

I was able to make it through the whole box with about 4 jams, but it was getting better before I ran out of ammo.

I have ordered a couple more mags....what would you guys recommend for defensive ammo?

And no, I am not a troll. Someone suggested I come here since this place has a rep for a wealth of knoledgge. We'll see about that.

Anyway, what would be a good holster? The lady at the store suggested an Uncle Mike's in the pants holster. Anyone have any experience with it? I can get it for $25 since I am a repeat customer.

You need to get a different gun. Four jams in one box of ammo is unacceptable. If you paid $250 for that thing, you got screwed badly. Cut your losses and get a Ruger or something for $100 more. Just get rid of that gun.

My dad had a lorcin once and it actually blew apart on him when he was shooting it.

[Gerard LeDouche]

Alright, I think you guys have convinced me to look for another gun.

I will probably give this one to my Grandfather so he can shoot at the squirrels up at his place.

What would you suggest for about $300?

Could I get a Glock. How do they hold up? I have read on The Gun Zone that they can be prone to blowing up?

[MCPreacher]

Why do people keep responding as if this isn't a fake post?

[soundwave]

Why do people keep responding as if this isn't a fake post?

Because it is the most fun I have had on GT in a while :)

[MCPreacher]

Because it is the most fun I have had on GT in a while :)

Well shut my mouth!

Far be it for me to stand in the way!

Happy Turkey Day!

[gjk5]

Alright, I think you guys have convinced me to look for another gun.

I will probably give this one to my Grandfather so he can shoot at the squirrels up at his place.

What would you suggest for about $300?

Could I get a Glock. How do they hold up? I have read on The Gun Zone that they can be prone to blowing up?



They do, I can't begin to tell you how many Kabooms I've seen at the range. Glocks are totally unreliable.


Maybe a good Comanche revolver or a fine Jiminez Arms semi-auto would be better. If you really want to man up on the gun you could go all the way and get a Tec-9, it'll shoot right through a building. Just don't use hollow point copkiller ammo in that one, it may tear the fabric of the space-time continuum and then we'd all be screwed. Remember; with great power comes great responsibility.

[12131]

I was wrong! It's still entertaining.http://photobucket.com/albums/y281/qavsiv/Funnies//dogrofl.gif

[crankbait11]

All 7 glocks ive owned exploded after only 3-8 rounds. I just slowly learned how dangerous they were over the years. I wish id knew about that gunzone website years ago. Id be a few thousand dollars richer and have more fingers to boot. My last glock was the lucky one to make it to 8 rounds, but I was in my back yard and some of the flaming shrapnell made it onto my house and burnt part of my den, which was an insurance nightmare. The 3rd one that exploded, blew 3 of my fingers off, (making me a righty in the process) and my index finger actually hit a small engine plane, causing it to crash into a grain bin which burnt an entire village to the ground (only a few head of cattle were killed though......oh,and the pilot).That polymer stuff really burns good once it gets goin, so steer clear of cheap guns like those. The only plastic gun I would consider buying now is that new super soaker artic blast 500 that can shoot freezing napalm. I think KBee toys has it for around $29.95 for the holidays, but im still not sure if I can conceal it. If I were going to sell a lorcin to my grandfather though,and thats a very big IF, I'd sell it no cheaper than $600 since hes family, and I might go $700 since it has the rare plum purple edition grips. If you have any good pawn shops around there, they might find you a good used jennings for a few hundred and get some ammo to boot. Real american zinc is the way to go imo, and lorcin and jennings pretty much cornered that market. That lorcin may save you or your grandfathers life,depending on if your crazy enough to sell that piece of american history.

[schild]

It's like a car accident that you can't look away from!

[zzzippper]

Wow, sorry to hear that dude. Well, at least your wife isn't screwing your brother...maybe.

[magnumize]

Lovin it.....
It's like a car accident that you can't look away from!

[01coltcolt]

Wow had me going for a while.......................at least it was funny! The comment about the pink snake skin Glock from the SF CA PD.......I am still crying/ laughing!

[Andy W]

Why do people keep responding as if this isn't a fake post?

This guy may actually be for real.

[gjk5]

Real american zinc is the way to go imo, and lorcin and jennings pretty much cornered that market. \


Bullcrap!!! Those are both CAST zinc, the Hipoints and Jiminez are FORGED zinc and therefore totally superior. Plus the Hipoint's bludgeonesque design is the way to go in case it comes down to hand to hand.

[ndbullet500]

Bullcrap!!! Those are both CAST zinc, the Hipoints and Jiminez are FORGED zinc and therefore totally superior. Plus the Hipoint's bludgeonesque design is the way to go in case it comes down to hand to hand.

Yeah, Hi-Point all the way. I hear that Jiminez uses MIM zinc. I can't abide MIM zinc components on my Gat. But that's just the way I roll. As they taught us in prep school, Pimping is not without effort, but it is a necessary endevour.

http://i76.photobucket.com/albums/j12/connell10/hipointpimp.jpg

[zzzippper]

This guy may actually be for real.

Say it ain't so Joe!

[Easterbrook]

Yeah, Hi-Point all the way. . . .

http://i76.photobucket.com/albums/j12/connell10/hipointpimp.jpg

What model steak knife is that?

[Cokeman]

What model steak knife is that?

Steak knife?

[zzzippper]

Steak knife?

Looks like a steak knife to me. I'd say the Ponderosa Saturday Night Special.

[Gerard LeDouche]

Ha! I am lovin' the old ass Timex and steak knife, Ghetto Fabulous, Babee!!

OK, guess I will have to start droppin' the hints to the ole Lady about a Glock 19 or 23.

If I have to I guess I could sell some plasma or my "seed" to scrounge the $$ for plastic pistola.

Would a used one be OK?

I bought the Lorcin new and am concerned about a high round count on a used gun.

I have been reading the site and see that Glock has a pretty good customer service group.

What about a lazer sight?

[Ron3]

Go back and tell them they charged you way too much and the gun is lemon.

See if they will give you store credit for the $250. Then make payments if you have to and get something nice. Like a Ruger 9mm. A new Ruger 9mm is about $350.

Ron3

[Oneiros]

I have 100 rounds of 9mm wolf I'll sell you for the low, low price price of 50 dollars. I'll even offer you the option to buy another 100 for the same price. It'll run great in that lorcin!

[Cokeman]

Looks like a steak knife to me. I'd say the Ponderosa Saturday Night Special.

I thought it was an expensive custom hand made knife.

[Usingmyrights]

I have 100 rounds of 9mm wolf I'll sell you for the low, low price price of 50 dollars. I'll even offer you the option to buy another 100 for the same price. It'll run great in that lorcin!

Don't listen to him. He's just trying to jip you. I'll do it for buy one get one free.

[Gerard LeDouche]

You guys are funny. Some of these comments are over my head since I don't know much about guns and stuff.

I am still chuckling over the knife and watch.

Anyone know anything about the Professional Ordinance rifle? I liked the way it felt and the light weight. It was bad ass. It looked like the gun the army uses, but just semi auto.

They had a Colt rifle there, but it was $1300!!! Dang!!

I may take the Lorcin back and try to get a credit, they seemed really easy to work with.

Maybe I could take it to the local flea market, people there are always looking for guns and ammo.

[gjk5]

Anyone know anything about the Professional Ordinance rifle? I liked the way it felt and the light weight. It was bad ass. It looked like the gun the army uses, but just semi auto.
.



I didn't know if you could get that into your favorite club.

[Kokoro]

I hate to admit it and I'll probably be banned for saying this but I also have a Lorcin .25 in my safe. My dad got it about 12 years ago for free when he signed up for a shooting membership at Don's Guns. I think he just buried it somewhere and it ended up giving it to me to store in my safe. He even had a little clip holster for it. Though I can barely hit the broad side of a barn with it I will say that it didn't jam on me when I ran a mag through it.

[brahmabull8413]

This is by far the funniest thread i've ever read. If this keep's going I vote STICKY, that way anytime i'm feeling down I can reread this thread and get a good laugh.

[Gerard LeDouche]

Something I have noticed on this site....a lot of folks fill in the lettering on their GAT with crayon....what is best the el cheapo brand from the Dollar store or actual Crayola crayons?

I think it says something about the owner when they customize the gun, make it unique.

I have made a lot of mods to my Civic and see the same type of pride in ownership in firearms on this site.

Very unique!! :)

[ndbullet500]

What model steak knife is that?

Farberware. Correction. Faberware Tacticool.

[filthy infidel]

GL I don't think that your seed should be spread, ever.

[xrmattaz]

Your pistol deserves quality leather, order today from Milt Sparks and you'll have it before you know it! Or talk to Nate at www.ubgholsters.com and see if he can hook you up.



ok, THIS THING ROCKED!!

I was able to make it through the whole box with about 4 jams, but it was getting better before I ran out of ammo.

I have ordered a couple more mags....what would you guys recommend for defensive ammo?

And no, I am not a troll. Someone suggested I come here since this place has a rep for a wealth of knoledgge. We'll see about that.

Anyway, what would be a good holster? The lady at the store suggested an Uncle Mike's in the pants holster. Anyone have any experience with it? I can get it for $25 since I am a repeat customer.

[bug]

Yeah, Hi-Point all the way. I hear that Jiminez uses MIM zinc. I can't abide MIM zinc components on my Gat. But that's just the way I roll. As they taught us in prep school, Pimping is not without effort, but it is a necessary endevour.

http://i76.photobucket.com/albums/j12/connell10/hipointpimp.jpg

easily the the funniest thing I have ever seen on GT

[Gerard LeDouche]

Your pistol deserves quality leather, order today from Milt Sparks and you'll have it before you know it! Or talk to Nate at www.ubgholsters.com and see if he can hook you up.




Those are toooo $$$ for my budget, nice though.

I think if I keep this Lorcin, I will stick to the UM brand.

I am still thinking about trading this in towards that Professional Ordinance gun.

That thing is wicked!! The lazer is cool. You don't even have to use the sites on it.

The ammo is $$$ though. It comes with some clips and maybe I can get them to throw in some wolf ammo too?

I think it would be neat to take the PO apart and stuff it in a little case, kind of like Hitman.

[Bogey]

First post?

Screen name Gerard LeDouche (Jerry the douche?)

Nahh he couldn't be a troll.


Could he?

My exact first thought.


Now that the "purple grip" comments were added........http://shanoogie.com/smilies/New_Folder/uglylol.gifhttp://shanoogie.com/smilies/New_Folder/uglylol.gifhttp://shanoogie.com/smilies/New_Folder/uglylol.gif

[Bogey]

Black Talon CANNOT penetrate soft body armor
http://www.firearmstactical.com/briefs12.htm


You believe everything you read on the intarweb?

[Bogey]

Why do people keep responding as if this isn't a fake post?


Uhhhh....because they "just don't get it"?


This thread right here is some great fun.

[Bogey]

Maybe I could take it to the local flea market, people there are always looking for guns and ammo.

http://shanoogie.com/smilies/smiles/anim_rofl2.gifhttp://shanoogie.com/smilies/smiles/anim_rofl2.gifhttp://shanoogie.com/smilies/smiles/anim_rofl2.gif

[Bullwinkle J Moose]

You're a funny guy, Gerard. If you decide to keep that fine pistol, don't bother with a holster, just disassemble it and keister the parts. Your Lorcin will be right at home there. And don't worry about ammo selection, since it will all work equally well in your pistol. :)

[soundwave]

You're a funny guy, Gerard. If you decide to keep that fine pistol, don't bother with a holster, just disassemble it and keister the parts. Your Lorcin will be right at home there. And don't worry about ammo selection, since it will all work equally well in your pistol. :)

I have to disagree. Every piece needs a holster. Have you thought of trying cardboard? I made a custom holster IWB for my Glock 19 (not as good as Lorcin, but it shoots armor piercing Black Talons). I can recommend what kind of cardboard to use if you are interested.

Check it out, it conceals VERY well, with my puffed boxers...

http://img.photobucket.com/albums/v454/krelin3/nice002.jpg
http://img.photobucket.com/albums/v454/krelin3/nice004.jpg
http://img.photobucket.com/albums/v454/krelin3/nice005.jpg

[gjk5]

Nice shank!!!

[Gerard LeDouche]

Nice shank!!!



I hope you are referring to the taped up screwdriver and not the guy's "shank".

That would be extremely gay.

[Preußen]

Trade the Lorcin in for an .88 caliber 40-watt National Ordnance P-63 Black Widow Optimized Phase-Plasma rifle with the 'knuten' option [see pic below]

http://img204.imageshack.us/img204/8720/argonaut870smallgn3.jpg
For $450 this baby fires special Nytrillium-core Extreme-Shok .88 caliber plasma photons that are in regular use by Special Forces, SWAT, FBI, CIA, KGB, Homeland Defense, and A-Teams deployed overseas and covertly. This baby was even quietly mentioned by Future Weapons host Richard Machowicz by name on the show!

Be sure to keep your clip loded with plenty of bullets ;)

[soundwave]

Nice shank!!!

Thanks bra!

[SDDL-UP]

Bought a Lorcin? Sorry to hear about that.

I think Lorcin Engineering was into engineering flooring tiles or something because I haven't seen evidence of engineering in their firearms!

The internet can be a very useful tool - use it before you spend your money.

[Gerard LeDouche]

Trade the Lorcin in for an .88 caliber 40-watt National Ordnance P-63 Black Widow Optimized Phase-Plasma rifle with the 'knuten' option [see pic below]

http://img204.imageshack.us/img204/8720/argonaut870smallgn3.jpg
For $450 this baby fires special Nytrillium-core Extreme-Shok .88 caliber plasma photons that are in regular use by Special Forces, SWAT, FBI, CIA, KGB, Homeland Defense, and A-Teams deployed overseas and covertly. This baby was even quietly mentioned by Future Weapons host Richard Machowicz by name on the show!

Be sure to keep your clip loded with plenty of bullets ;)



What movie is that from??!! Or is it from a video game? PS 2 or 3?

Yeah, I should have read up on the gats, I was impulsive and trusted the lady at the gun store. You would think they know a lot about guns and would help the customer get the right gun?

[texasheat16]

have to disagree. Every piece needs a holster. Have you thought of trying cardboard? I made a custom holster IWB for my Glock 19 (not as good as Lorcin, but it shoots armor piercing Black Talons). I can recommend what kind of cardboard to use if you are interested.

Check it out, it conceals VERY well, with my puffed boxers...




LOL! that's awesome man!

[Preußen]

What movie is that from??!! Or is it from a video game? PS 2 or 3?

Yeah, I should have read up on the gats, I was impulsive and trusted the lady at the gun store. You would think they know a lot about guns and would help the customer get the right gun?
No.
The .88 caliber 40-watt National Ordnance P-63 Black Widow Optimized Phase-Plasma rifle is based on the Remington 870 shotgun modified with an electronic ignition system [similar to the GAU-8 30mm on the A-10], and a fully rifled barrel enabling it to fire .88 caliber photons and Hermeneutic Eschtalogical Rare Earth Nytrillium Core Extreme-Shok ammunition commonly shown in gun magazine ads. [See pic below]
http://img140.imageshack.us/img140/2328/extremeshokreduxzq6.jpg
notice what firearm they're using in the pic above - The National Ordnance P-63 Black Widow Optimized Phase-Plasma rifle....

Print copies of the National Ordnance P-63 Black Widow Optimized Phase-Plasma rifle and Extreme Shock Nytrillium ammo and bring them with you to the gunshop the next time you go so they know what you're talking about.

[Gerard LeDouche]

No.
The .88 caliber 40-watt National Ordnance P-63 Black Widow Optimized Phase-Plasma rifle is based on the Remington 870 shotgun modified with an electronic ignition system [similar to the GAU-8 30mm on the A-10], and a fully rifled barrel enabling it to fire .88 caliber photons and Hermeneutic Eschtalogical Rare Earth Nytrillium Core Extreme-Shok ammunition commonly shown in gun magazine ads. [See pic below]
http://img140.imageshack.us/img140/2328/extremeshokreduxzq6.jpg
notice what firearm they're using in the pic above - The National Ordnance P-63 Black Widow Optimized Phase-Plasma rifle....

Print copies of the National Ordnance P-63 Black Widow Optimized Phase-Plasma rifle and Extreme Shock Nytrillium ammo and bring them with you to the gunshop the next time you go so they know what you're talking about.



Ha ha, very funny.

You mentioned Nytrillum ammo above, is that any similar to Nyclad ammo?

Is that the stuff that can penetrate a bullet proof vest?

Anyone suggest some good night sites?

Evidently that is the thing to do with your gun, because everyone on Glock Talk puts night sites on their guns.

[Preußen]

Ha ha, very funny.

You mentioned Nytrillum ammo above, is that any similar to Nyclad ammo?

Is that the stuff that can penetrate a bullet proof vest?


Yep, that's the stuff!
Federal Cartridge Company pulled it fom the shelves in 1993 soon after it was discovered that Nyclad ammunition penetrates level XVI body armor and 1/2" hardened steel by teflon coating the bullet.

The Nyclad .38 Special +P is like a .44 magnum


http://img223.imageshack.us/img223/8484/nyclad001reduxsn0.jpg
Nytrillium Extreme Shock hides the teflon on the inside of the bullet. Such bullets leave the gun's barrel white hot when fired. Even worse, on contact they explode, causing even more damage

[Preußen]

Ha ha, very funny.

You mentioned Nytrillum ammo above, is that any similar to Nyclad ammo?

Is that the stuff that can penetrate a bullet proof vest?


Yep, that's the stuff!
Federal Cartridge Company pulled it fom the shelves in 1993 soon after it was discovered that Nyclad ammunition penetrates level XVI body armor and 1/2" hardened steel by teflon coating the bullet.

The Nyclad .38 Special +P is like a .44 magnum


http://img223.imageshack.us/img223/8484/nyclad001reduxsn0.jpg


Nytrillium Extreme Shock hides the teflon on the inside of the bullet. Such bullets leave the gun's barrel white hot when fired. Even worse, on contact they explode, causing even more damage

[DriBak]

I bought a Lorcin .380 for 80 bucks and got ripped off

[diode]

DAMN! I just spent 15 minutes reading thru this post and I feel like I got the Lorcin in the butt! My bad!!

[jdeere_man]

This thread is too funny. I know we all hate people who troll, but I have got so many laughs off this thread I don't care. I love that cardboard holster.

[Gerard LeDouche]

Yep, that's the stuff!
Federal Cartridge Company pulled it fom the shelves in 1993 soon after it was discovered that Nyclad ammunition penetrates level XVI body armor and 1/2" hardened steel by teflon coating the bullet.

The Nyclad .38 Special +P is like a .44 magnum


http://img223.imageshack.us/img223/8484/nyclad001reduxsn0.jpg
Nytrillium Extreme Shock hides the teflon on the inside of the bullet. Such bullets leave the gun's barrel white hot when fired. Even worse, on contact they explode, causing even more damage


That is the stuff!! I scored on a box of this stuff for $40!!!

Is it true that you can make the bullet expand by cutting an X into the front of the bullet?

[NY Glock]

Should have saved up another $100 and picked up one of these.

http://i24.photobucket.com/albums/c2/Davis1950/Weapons/Glock/GlockPimp.jpg

ILMAO........

[G21forME]

Ha ha, very funny.

You mentioned Nytrillum ammo above, is that any similar to Nyclad ammo?

Is that the stuff that can penetrate a bullet proof vest?

Anyone suggest some good night sites?

Evidently that is the thing to do with your gun, because everyone on Glock Talk puts night sites on their guns.

http://i36.photobucket.com/albums/e18/G21forme/115356.jpg

[M11/9forfun]

G21 beat me to it---as soon as I saw "everyone puts night sites on their guns" I immediately thought of HomeBoy sights....just make sure they don't snag on the cardboard holster....

[Gerard LeDouche]

Are those side sites for real?

****, those would be bad ass, you could fire off a round and let the jump of the gun move to the next target.

Got a link for those sites? Price?

[Gerard LeDouche]

Uhhh, what the ****.....this site won't let you post bad words?

Let's try this:

****

****

*****

damn

cock

mother****er


OK, this is a buncha bull****. Who the **** has a site that won't let you use cuss words?

What the ****?

Are the owners of this site such ******* that they have to have such a tight grip on words?

[G21forME]

Too Funny

Ibtl

[Usingmyrights]

As long as this thread as lasted without being locked Gerard LeDouche must be Erics alterego.

[M11/9forfun]

Last edited by Gerard LeDouche: Today at 10:43. Reason: Outrage!!

Now that's funny stuff...

[Gerard LeDouche]

As long as this thread as lasted without being locked Gerard LeDouche must be Erics alterego.



Who is Eric?

[Usingmyrights]

He runs this joint.

[Gerard LeDouche]

"I see.", said the blind man.

Gracias.

[Dauntless452003]

Captain Ledouche,

1. Whats the name of your favorite club?
2. Have you ever thought of getting one of those dope azz wooden guns like the bad guy uses in the movie in the line of fire? I bet that would getcha past the metal detectors at the club. Prolly can hook you up at the local high school wood shop. Make sure u use balsa wood, tho, don't want to weigh down them saggy draws when you strapped! But you have to buy some hollowed out rabbits feet to store the bullets in, dawg.

[James Markov]

I cannot believe how much time has been spent on such a subject-Lorcin quality!

[James Markov]

Ok...who else has actually shot or owned a Lorcin? Tell us how it went if you can...

[Honkie]

I have gas.....

[soundwave]

Ok...who else has actually shot or owned a Lorcin? Tell us how it went if you can...

No problem. I rented one at the range today. VERY impressive firearm. I will pick one up to replace my G19 very soon. The grip fit my hand like a 6 fingered glove, and I have 7 fingers. I can't wait to get my hands on one again. Here is a 7 yard target I shot today just to give you an idea of accuracy. Well good enough for combat obviously. I am thinking of getting a smart carry so I can wear it under meh boxers.

http://img.photobucket.com/albums/v454/krelin3/Targets/LorcinTarget.jpg

[novaDAK]

As long as this thread as lasted without being locked Gerard LeDouche must be Erics alterego.

hahahaha :D

[MyGlockRocks19]

Should have saved up another $100 and picked up one of these.

http://i24.photobucket.com/albums/c2/Davis1950/Weapons/Glock/GlockPimp.jpg

If Paris Hilton had a gun (God forbid!) it would probably look a lot like that.
"Thats Hot."

[magnumize]

LOL!!!! Too funny
No problem. I rented one at the range today. VERY impressive firearm. I will pick one up to replace my G19 very soon. The grip fit my hand like a 6 fingered glove, and I have 7 fingers. I can't wait to get my hands on one again. Here is a 7 yard target I shot today just to give you an idea of accuracy. Well good enough for combat obviously. I am thinking of getting a smart carry so I can wear it under meh boxers.

http://img.photobucket.com/albums/v454/krelin3/Targets/LorcinTarget.jpg

[James Markov]

LOL!!!! Too funny

Did you shoot it "gansta style?"

[jdeere_man]

Last edited by Gerard LeDouche: Today at 10:43. Reason: Outrage!!

Now that's funny stuff...

Now this just get's better by the minute!

/rofl/

[soundwave]

Did you shoot it "gansta style?"

Thumbs forward-gangsta hybrid grip actually. I find it is the best mix of accuracy and style.

[Zapfenstreich]

This thread is immortal.

[usmc0341]

As long as this thread as lasted without being locked Gerard LeDouche must be Erics alterego.

The internal affairs division of GlockTalk!

[Gerard LeDouche]

Soundwave....your groups are a little worse than mine.

Did you try to tighten your grip and not limp wrist it?

I was able to get a group in the center, but I ran out of ammo.

You can reload the brass things, right?

I may buy some powder and bullets and give that a shot..lol.

I can use .357 bullets right?

[osiruscyn]

you can use .357 bullets. That would actually be the best thing since the .380 is a little difficult to reload. The .357 penetrates better and has just a smidge more recoil than the .380 but it's worth it.

If you are looking for another gun still, An intra-tec might be a good investment. It has a very high capacity and is a little known secret in the law enforcement community as a great back up gun. I would venture to say that close to 80% of the police out there have at least one in their trunk. Here's a link to one up for sale on a gun website.

http://www.gunbroker.com/Auction/ViewItem.asp?Item=85145136

Not many people will tell you about these because they are not very well known and are highly regarded as prized firearms. Trying to find one for sale is tough because no one wants to let theirs go.

They don't have many holsters for it though. You could always use a sort of sling to carry it under your north face down jacket or something like that. Tucked under your arm, no one would know you have it. It's pretty compact.

[soundwave]

Soundwave....your groups are a little worse than mine.

Did you try to tighten your grip and not limp wrist it?

Look bra, first off, I ain't no fairy!

Secondly, you might be right about the grips. I practiced pistol whipping beforehand and I think the grips came a little loose. BTW, does your range have pistol whipping targets? Min e doesn't and it kinda urks me.

Anyways, I left my screwdriver at home so tightening my grips just wasn't an option.

How far away were you shooting from? If your groups were better than mine, I am guessing 3-5 feet. You really can't compare your groups to mine, apples and oranges bra. Even with a flyer and loose grips I managed a pretty nice combat grouping, from the bullets that hit the target. I can shoot sub MOA with my black talons and and sureshot laser taped to the barrel.

[Gerard LeDouche]

Look bra, first off, I ain't no fairy!

Secondly, you might be right about the grips. I practiced pistol whipping beforehand and I think the grips came a little loose. BTW, does your range have pistol whipping targets? Min e doesn't and it kinda urks me.

Anyways, I left my screwdriver at home so tightening my grips just wasn't an option.

How far away were you shooting from? If your groups were better than mine, I am guessing 3-5 feet. You really can't compare your groups to mine, apples and oranges bra. Even with a flyer and loose grips I managed a pretty nice combat grouping, from the bullets that hit the target. I can shoot sub MOA with my black talons and and sureshot laser taped to the barrel.



Check it, Cold Slice....I meant tighten yo fingers, not the grip panels.

:okie:

[magnumize]

I had a Raven 25acp once,does that count?
Ok...who else has actually shot or owned a Lorcin? Tell us how it went if you can...

[M11/9forfun]

I had a Raven 25acp once,does that count?

Only if you shot it for groups:rofl: And why did you ever get rid of it---or is that something you can't discuss???:whistling:

[soundwave]

Check it, Cold Slice....I meant tighten yo fingers, not the grip panels.

:okie:

Oh, no I didn't try that.

[Usingmyrights]

The internal affairs division of GlockTalk!

Somebodies gotta do it. Now just speak slowly and clearly so the mike picks everything up.

[cwhitt88]

The annotated "flyer" on the target is the icing on the cake! I teared up I was laughing so hard.

[osiruscyn]

"What about that little guy?"

"who, that little guy? I wouldn't worry about that little guy"

[RyDC]

I got a Lorcin L380 for free, and that was too much to pay for it.

Pros:
It can be melted down and turned into a cool paperweight. Or recycled. All from your home!

Cons:
Gol, where to start?
It's made of a crappy zinc alloy. You know how pennies dissolve in Coke? The metal composition is somewhat similar. You could leave a Lorcin in a tub of Coke syrup, wait a couple months, and have Lorcin slurry.

It shoots (occasionally) the .380. A fine round in guns that weigh half as much and are twice as reliable.

It doesn't feed hollowpoints, softpoints, aluminum or steel-cased ammo. It doesn't feed jacketed hardball most of the time, but I'll give it credit for the 1/2 to 3/4 of the time it does feed hardball.

I'm more accurate with a bow and arrow.

When you disassemble it, firing pins (strikers?) go flying in a variety of directions. Not that it's worth cleaning, as it doesn't help it much.

The manual gives directions on how to do the following:
Load
Fire
Remove the safety from the frame. Great for literate gangsters who can follow directions, eh?

The magazine did an uncommanded disassembly-- when it fell on CARPET, while EMPTY.

The guns have been known to disassemble while firing. Knew a guy who gave himself a nice bruise on the cheek from where a Lorcin slide flew off the frame and clobbered him.

Frankly, if I got held up by a criminal with a Lorcin, I'd feel utterly confident in going after him bare-handed. If I were in a gunfight, it's the gun I'd want the other guy to have.

That is all. If you really paid $250 for one, take it back, and buy ANYTHING else. Spring an additional $100 for a Ruger, Kel-Tec, used Glock, FN, PPK, or anything on the shelf made out of steel or polymer. Heck, I just paid $350 OTD for a SIG P220.

[RemSp10]

Ok...who else has actually shot or owned a Lorcin? Tell us how it went if you can...

Sorry to admit it but I did. .380.got it from ye ole pawn shop brand new,can't remember what I paid for it but was worth every penny.:rofl: Those other guys that shot those groups are lucky ,i could not get this P.O.Shi* to fire more than 4 rounds and it locked up tighter than a bull"s a** in fly season. I took it back to the pawn shop and they offered to replace it for free,I was nice to them because it was not there fault.I got my money back.
A little further down the line i also picked up a Raven .25 another great move for me:rofl:.at least it shot not too bad.Took it back to Montana one year and was with my Father in Law ( on the ranch) I managed to get a close up shot of a gopher and surprised the he** out of me ,shot him deader then dead.:faint: That was pure luck.
I have now inherited (sp) a Sterling .25 from dead aunt. just a toy to play with.

[OKgetdown]

I am glad for this thread, as I was thinking of buying a Lorcin as well. I can see no one really has anything bad to say about this fine gun. So I believe I will buy one tommorow. Better yet I think I will just trade my Glock straight across for it. Thanks for the info guys.

[Kokoro]

Tommorow is a range day for me. I think just for grins and giggles I'll take the Lorcin .25 I have buried in my safe and let you guys know how it goes. I'm not sure that this thing has been fired in about 8 years. Just curiouos...should I put it in the same case as my glock and Makarov..or does it deserve it's on case:supergrin:

[Gerard LeDouche]

Big news, I have decided to get a Glock 19. They have a used model that is 3rd ? generation, with night sites, case, mags, etc...

I get to use the $250 as a credit!!

What type of ammo would you guys recommend for practice and carry?

I passed on the Professional Ordinance thingie for now.

[Zapfenstreich]

What type of ammo would you guys recommend for practice and carry?

You could try some of those surplus L7 subgun +P+ loads in her. They say some guns experience slide separations though, so having the back end of that sweet G19 whizzing past your noggin at a trans-sonic velocity might, well get interesting let's say... just don't park your fly ride directly behind your lane, and you'll be aight.

Or, there's always my uncle Bill's RRBR (random range brass reloads). They have proven popular with those who can't decide between FMJ, JHP, LRN, 115 gr., 125 gr., 147, 105 grain, whatever. Uncle Bill just throws all them bullets in one bin & all the random brass in another, then mixes them around. He fills each case up with plenty of whatever powder's been sitting in a can in the back of the shed the longest, then starts rock chuckin out them reloads. Sometimes, just to check his quality control, he grabs a handful and wails away at the possums out back. Most of 'em go bang, and some go really bang.

As Uncle Bill sez..."Them's that ain't dead gets another till they is."

[vafish]

I have to disagree. Every piece needs a holster. Have you thought of trying cardboard? I made a custom holster IWB for my Glock 19 (not as good as Lorcin, but it shoots armor piercing Black Talons). I can recommend what kind of cardboard to use if you are interested.

Check it out, it conceals VERY well, with my puffed boxers...

http://img.photobucket.com/albums/v454/krelin3/nice002.jpg
http://img.photobucket.com/albums/v454/krelin3/nice004.jpg
http://img.photobucket.com/albums/v454/krelin3/nice005.jpg



I've been away from this thread for too long.

That's the funniest damn thing I've seen in a long time.

:bowdown:

[RemSp10]

SOUNDWAVE
Can I get one of them thar holsters special built to fit my 22 and 19. will my sterling .25 auto fit also. Also is thar a choice of colors??:rofl:. you can e-mail me direct so as everbody won't flood you with requests. my e-mail
Idumbshi*2@ WTF.con

[RJ1670]

Leeeeeeeeeeeeeeeeeeeeerrrrrrroooooooooooooooooyyyyyyyyyyy Jeeeeeeeeeeeeeeeeeeeeennnnnnnnnnnnnnnkkkkkkkiiiiiiiiiiiiiiiinnnnnnnssss

[soundwave]

SOUNDWAVE
Can I get one of them thar holsters special built to fit my 22 and 19. will my sterling .25 auto fit also. Also is thar a choice of colors??:rofl:. you can e-mail me direct so as everbody won't flood you with requests. my e-mail
Idumbshi*2@ WTF.con

Something must be wrong with mah internets, I keep getting an error message from mah e-mail, says Idumbsi*2@WTF.con server error 80085.

Anyways, don't worry about flooding mah e-mails up, I change accounts every week. After watching The Jason Boure Trilogy, I take precautions.

I think I can make a custom slide model that would accomodate both a 19 add a 22, it will take a few more cuts and maybe some reinforcement tape, maybe even a paper clip or 2 for added ridgidness. Do you want the boxer tucking attachment, or do you puff yours as well?

I am also offereing custom sharpie graphics. Color sharpie will cost a little more cause thems are like 45 cents more a pack at Office Max.

For the Sterling, I would recommend just pocket carrying it. Just make sure you cock in before you put it in yur pocket cause in a high stress situation your brain can only do on ething at once I read. So alls you will have to do is pull it out and shoot. If you really have your heart set on a holster for it, I can make you a limited edition custom heavy weight laser printer paper one. Im thinkin 65 lb, maybe off white or eggshell, satin finish.

[Adam5]

If you want something alittle better than the Lorcin or the G19, I have a Glock 7 that I'll sell you.

[ISUSteve]

That cardboard holster, honestly, I bet that thing isn't half bad....

[M11/9forfun]

That cardboard holster, honestly, I bet that thing isn't half bad....

It's certainly not worthy of a Lorcin:tongueout:

[JMag]

At least seven pages in a Lorcin thread...whoda thunk it?

[SergeantC]

Well, I'm convinced. I've been following this thread since it started, and, thanks to all the information I've seen here, I've decided to trade all my Glocks, all my Smiths, and my BHP for as many Lorcins as I can get in trade.

I realize now I've been wasting my time with these other guns. Lorcins blow them all out of the water in terms of quality, reliability, and accuracy.

Lorcin. Who needs a firearm other than a Lorcin?

No need for a holster, though: I'll just tuck 'em inside my waistband.:tongueout:

[Gerard LeDouche]

If you want something alittle better than the Lorcin or the G19, I have a Glock 7 that I'll sell you.



Glock 7??

I don't see that one on their site?

How much?

What are they made of?

Caliber(s)?

[SergeantC]

Glock 7??

I don't see that one on their site?

How much?

What are they made of?

Caliber(s)?

You might not be able to afford it. It costs more than you make in a month.

[glockrod]

I bet they're getting a kick out of this.

nuff said!!

[M11/9forfun]

Well, I'm convinced. I've been following this thread since it started, and, thanks to all the information I've seen here, I've decided to trade all my Glocks, all my Smiths, and my BHP for as many Lorcins as I can get in trade.


I think you'll be disappointed---unless you have at least three to trade you won't get a Lorcin...need 5+ to get a NIB...:uglylol:

[Usingmyrights]

When you disassemble it, firing pins (strikers?) go flying in a variety of directions. Not that it's worth cleaning, as it doesn't help it much.

The manual gives directions on how to do the following:
Load
Fire
Remove the safety from the frame. Great for literate gangsters who can follow directions, eh?
.


When I get asked how do you clean a Lorcin, Cobra, Hipoint, etc, its all I can do to keep from saying "You buy a new one".

[Ulstulst]

Glock 7??

I don't see that one on their site?

How much?

What are they made of?

Caliber(s)?

Yeah, it costs more than you make in a month.

It's made of porcelain and can go through metal detectors.

[moeman]

Hunting the American Big Five w/ a Lorcin
From Wikipedia, the free encyclopedia

The phrase American Big Five game was coined by big-game hunters and refers to the five large mammals that were sought in the 'hood. The term is still used by most tourist and wildlife guides to discuss American intercity wildlife safaris.

The collection consists of the feathered pimp, the meth headed white mugger, the American card cheat, the angry cheating skank and the alpha male skid row slogger.The members of the big five were chosen for the difficulty in hunting them and not their size, which is why the angry cheating skank is on the list and the enormous hill billy is not.

The preferred firearm for the American Big Five is a Lorcin pistol of caliber no greater than .380 although many other guns including the indigenous zip-gun have been used to bag the American Big Five.

Many street dealers provide economical safaris and will guide the hunters to the right spots, generally near watering holes and watering ho's, between 1 and 3 am for best hunting is experience.

External Links:

Feathered Pimps Unlimited (Sporting organization)
Meth headed white mugger preservation society
Navy Seals in Action: Lorcin Firepower Guide

[Kokoro]

Well as I said yesterday I took the lorcin I had to the range yesterday and here are the results of todays shooting

Tapco-rized WASR 10 4 30rd mags...nothing went wrong at all

Makarov.. 100 rounds... same above

Lorcin .25 2-7 round magazines....3 stove pipes and one failure to return to battery. That's about a 50% reliabilty, which is oddly enough bettern then I thought for this little gem. Back in the safe it goes

[texasheat16]

all hail Lorcin in all it's craptacular glory! Sorry guys, I just want to keep this thread alive for LeTroll... I mean LeDouche. Find info on the glock 7 yet?

[MarksGlock22]

This is great!! I am crying im laughing so hard!:rofl:

[crazydave]

Well as I said yesterday I took the lorcin I had to the range yesterday and here are the results of todays shooting



Lorcin .25 2-7 round magazines....3 stove pipes and one failure to return to battery. That's about a 50% reliabilty, which is oddly enough bettern then I thought for this little gem. Back in the safe it goes

Kokoro, You obviously were limp wristing the Lorcin. You were anticipating what you thought was to be a massive amount of recoil. You need to hold it horizonal so you can "ride" the recoil to the next target.

Dave

Oh ya also tighten the grips, they may be loose. I like the clear straping tape for this.

[crazydave]

Uhhh, what the ****.....this site won't let you post bad words?

Let's try this:

****

****

*****

damn

cock

mother****er


OK, this is a buncha bull****. Who the **** has a site that won't let you use cuss words?

What the ****?

Are the owners of this site such ******* that they have to have such a tight grip on words?


This is the funniest post ever on GT!!!

[Gerard LeDouche]

Yeah, it costs more than you make in a month.

It's made of porcelain and can go through metal detectors.


I have never heard of that? Does DHS know about it?

If this is true, then these Glock 7s should be banned from civilian use...for the chillins.

I will be picking up my Glock 19 tomorrow. Will try to borrow a friends camera to post some pics.

What type of accesssories would you guys recommend?

I don't want no junk!!

Lazer? Which color, red or green?

How many clips?

Lube?

I have seen some pretty fly gats here, some are chromed like in Bad Boys.

Is that expensive?

[RemSp10]

As far as accessories for your g-19. you. dont need none. BUT be sure you buy the LIFE TIME warranty. remember this is a glock (or glook as my friend calls it) because unlike the surburb quality and reliability of the Lorcin,:rofl: the glock is prone to break when it gets cold or melt if it gets hot ,You know they are of made of plastic. I heard Gaston bought up all of the old discarded credit cards and had the boys melt them down and waaa laaaaaa the glock was born.

[soundwave]

I have never heard of that? Does DHS know about it?

If this is true, then these Glock 7s should be banned from civilian use...for the chillins.

I will be picking up my Glock 19 tomorrow. Will try to borrow a friends camera to post some pics.

What type of accesssories would you guys recommend?

I don't want no junk!!

Lazer? Which color, red or green?

How many clips?

Lube?

I have seen some pretty fly gats here, some are chromed like in Bad Boys.

Is that expensive?

OK, I think I can help out, but I will first say stick with the Lorcin, Glocks are known to explode.

Accesories: maybe a nice ballcap, I like Dodgers or Atlanta Braves. Get some new kicks with your gun too, so you can run good after bustin caps.

Lazers: I would look for the new "Mace Windu Purple laser" from Aimshot. It ataches directly to the trigger guard so it never looses zero.

Clips: Good, i am glad you got this right, most peole call em magazines, like what am I gonna read my bullets? pffffft. I would get atleast 30-40 clips, I carry mine it a tac vest under my Starter jacket.

Lube: Astroglide, hands down.

[osiruscyn]

I have never heard of that? Does DHS know about it?

If this is true, then these Glock 7s should be banned from civilian use...for the chillins.

I will be picking up my Glock 19 tomorrow. Will try to borrow a friends camera to post some pics.

What type of accesssories would you guys recommend?

I don't want no junk!!

Lazer? Which color, red or green?

How many clips?

Lube?

I have seen some pretty fly gats here, some are chromed like in Bad Boys.

Is that expensive?

Make sure you get a saf-T-Block so you don't shoot yourself in the junk when you carry messican style.

I would get the crimson trace and a laser guide rod. It will put 2 dots on the person rather than one. That way they will think they have 2 guns pointing at them and be even more scurred.

As for clips, I would get nothing but the 33 rd clips. Anything less than 30 is not lethal enough. You gotta make sure you get the person you are aiming at and at least 10 of his homies.

As for lube, I like analese myself. It's not too slick yet provides enough long term lubrication.

Chrome is a ghetto faux paus. The black is the way to go. That way when you are running from the cops at night, it will be harder to see under bushes.

[RemSp10]

Sorry ,but I have to disagree with the above post on the color choice,Altho black is good -, what happens if when at night you are riding your scotter and it falls out of your custom built holster ((by soundwave ,sorry no flame intended,iam sure your product is nice.)) and hits the ground,if it was painted with a flouresant paint or even have one of those light stick things that light up when it is broke. you would be able to find it quicker. But just remember the ole saying ::: MAKE THE FIRST ON COUNT,BECAUSE WITH A GLOCK IT MAY NOT FIRE THE SECOND TIME.:drunk:

[Gerard LeDouche]

I am getting really excited about picking up my Glock tomorrow.

I gotta go pee now. :elephant:

[RemSp10]

There ought to be a club for "Former Lorcin Owners" I vote for Gerald to be da Pres. Because he knows his guns ,look at the great deal he got on the his Lorcin.





All kidding aside. Gerald you are one heck of a good sport to put up with the ribbing you are getting,a man like you should be respected..:number1:
SCROLL DOWN
I
I I
I I
I I
I

I
I
I
I
I
I
HAHAHAHAHAHAH:rofl::rofl:

[SergeantC]

I think you'll be disappointed---unless you have at least three to trade you won't get a Lorcin...need 5+ to get a NIB...:uglylol:

I have Glocks, Smith revolvers, Smith semi-autos, Kel-Tecs, a BHP, a Ruger .22, Colt revolvers, and a Taurus. I'm willing to trade them all for a battery of Lorcins.

I should be able to get three or four: one for my car, one for my home, one for carry, and possibly a fourth for spare.

I figure once I have enough Lorcins, I won't need anything else. All other guns are worthless compared to the mighty Lorcin. They are only good as trade-bait, so that I can get the better of ignorant people who will give the best guns on the market in return for Glock and S & W junk.

Lorcin. Everything else is a pale imitation.

When you have Lorcins, you need no other guns.

[RemSp10]

Lorcins are like potato chips,you cant just have one, you need the other ones for parts.
the girl ( if you cant trust a girl ,who can you trust?) at the gun store wanted to trade me a Lorcin for my 19,just about had me talked it to it ,but the Lorcin had loose grips and only black ones at that and I the wanted the pearl ones. Also diden't have the money to boot 275.00.:crying:
I think I passed up a good deal. what say????

[moeman]

Lorcins are like potato chips,you cant just have one, you need the other ones for parts.
the girl ( if you cant trust a girl ,who can you trust?) at the gun store wanted to trade me a Lorcin for my 19,just about had me talked it to it ,but the Lorcin had loose grips and only black ones at that and I the wanted the pearl ones. Also diden't have the money to boot 275.00.:crying:
I think I passed up a good deal. what say????

Well, if the girl has a "TRAMP STAMP", (you know the tattoo that sits just above her ass, above the missing panties)...She can be only be trusted to be able to suck start a Harley and save you from bleeding to death by using her piercings as sutures.

This kind of sex breezy CAN NOT be trusted when it comes to guns! Her old man in the can would cut her off from the conjugal visits to his cell block buddies if she shamed her man to not take advantage of a man like you.

Don't let that pretty bright blue eye shadow and lack of gag reflex sway you!

No Lorcin is worth trading a Glock for straight across. They would have to throw in a box of .380's to make it a good deal for you. Take caution!

[Ballistic]

The annotated "flyer" on the target is the icing on the cake! I teared up I was laughing so hard.

Yeah that was pretty damn funny....

[RemSp10]

hay moeman.
You described her right down to her tramp stamp.
Have you been shopping there also,you not trying to get a better deal than me are you??
Maybe if i went back there i could swing a better deal if I ----well enuff said.
Glad i read you post when i did ,because i was getting ready to go back and try for a better deal.

just gota get one of them Lorcins,do they make it in .45 cal.????

[annielulu]

I have a lot of good guns that I trust when the chips are down. I bought them all new and spent good money on them.
For the heck of it, I was on Gunbroker one night and bought a .22 Lorcin that was like new with the box, etc. I knew what I was buying but just wanted to own a "Saturday Night Special" just for the novelty of it. I paid $140.00 for it.
It shoots pretty accurate until the 2nd. round. It fails to eject sometimes, stovepipes, etc., practically does everything you want a gun not to do.
I just took it to my gunsmith to have him make it right, He said it would not cost too much and should shoot fine when he is through.
Anyway, I like the way it looks and feels. Even when it comes back fixed I would never carry it or rely on it completely.
I'll take it to the range sometime just for fun. It's cheap to shoot. But most times it will be just a "Closet Queen", only to show my gun friends what one of them looks like.
In the next few days I am off to a local firearm dealer to buy a Glock 36 to add to my collection. Will I carry it, you bet. Will I rely on it after a few hundred JHP's, surely. You get what you pay for.

[sandhiller]

Lorcin sounds like the perfect self defense weapon to me. If you ever get mugged, just hand him the gun and dare him to shoot you with it. That should change his ways of evil. :rofl:

[Usingmyrights]

I wonder if this thread will make it to 10+ pages. Can't believe we're already at 8 pages about a Lorcin.

[40Pirate]

I have seen some pretty fly gats here, some are chromed like in Bad Boys.

Is that expensive?




It can be, sometimes those Silver Sharpies go for as much as $ 2.49 here.

http://www.volcanoarts.biz/cart/glass/silversharpie-horizontal.jpg

[uzimon]

You guys are funny. Some of these comments are over my head since I don't know much about guns and stuff.


I may take the Lorcin back and try to get a credit, they seemed really easy to work with.

Maybe I could take it to the local flea market, people there are always looking for guns and ammo.
no, just sell it outside the local parole office.
lotsa buyers there:cool:

[RemSp10]

I could post a picture BUT I sold my camera to buy a .380 chrome LORCIN for my wife for a self defense gun and the rest i Pre paid and increased her ins policy.:whistling: I send her shopping a lot more now.

[Laserlips]

Hey, leave the guy alone..

Just because a few of us don't appreciate the finer points of the Lorcin does not mean everyone feels the same way..

Oh, by the way Gerald, I've got a real nice FIE Titan a gentleman gave me just calling your name! Please send me a USPS money order for $400 and it's yours.. I'll even spring for the shipping! :wow:

Don't be a stranger now! :faint::faint:


JP

[RemSp10]

I am getting really excited about picking up my Glock tomorrow.

I gotta go pee now. :elephant:

Gerald Gerald, :wavey:
Where are you my boy???? We haven't heard from you for awhile.
Did you get that new glock yet or did you decide to keep that high quality Lorcin:rofl:

[ndbullet500]

What type of accesssories would you guys recommend?

I don't want no junk!!

Lazer? Which color, red or green?

How many clips?

Lube?



You can save some scratch by getting one of the lazers off a hi-point. They are like $40 and better than crimson trace 'cause all your peeps can see how trick your Gat is, and you aren't just some punk with any ole gun. Yours has a Hi-Point lazer - that's street cred, boyyo.

Make sure to use water based lube, the oil based kind can cause problems...and the water based is multipurpose.

[texasheat16]

Lorcin is the type of gun that you wouldn't mind letting your children play with. You know there is no way it's going to hurt anyone!

Just kidding... really, don't let your kids play with guns. There might be a someone out there that would take me seriously (i.e. the kind of guy who buys a lorcin)

[Gerard LeDouche]

I got it, just no digi cam right now.

It has a serial # that starts with "F" if I remember correctly.

Got 2 10 rounders and 4 15 rounders as well as a G17 cip too.

When I brought it home, my Mom said it was made out of plastic and said I got robbed.

She liked the other one better, said it was not as fat and ugly like the 19.

She said I could keep it in the house as long as it was unloaded and the bullets locked up somewhere else.

I gotta get my own place, this is getting old.....

[Erich]

Sorta OT: I just got my second murder case involving a Lorcin .380. Again, this one worked fine in terms of the killing part, but this one did jam between victims (the last one ran like a top). :embarassed:

[notasccrmom]

So what did you pay for the Glock?

You paid $250 for the Lorcin, so the Glock had to be at least $800 in that store...

[RemSp10]

Nice job Gerald :wow:.If i could make a suggestion ,what i would do is lock up mama and keep the bullets out.
you be carefull now with that glock ,you know that they are prone to shoot ever time the trigger is pulled. No more game of chance.:yourock:

[Gerard LeDouche]

I paid $200 OTD for the gat, $130 for the cilps.

Oh, by the way, my name is Gerard. :upeyes: :tongueout:

Kinda misse the Lorcin now, the chicks were impressed when I pulled it out.

Now they will probably think I am a narc or gang banger.

[RemSp10]

I apololize for misspelling your name.
You got really a great deal on the 19. As far as the chicks being impressed ,you can always spray paint the glock silver,or i think they have chrome paint also.. Check Wally World for paint. Or do they have wally world in france?

[Another Miller]

lol


If you really want to trick out your ride, get a gold plated lorcin and have it used as the shifter knob.

[Gerard LeDouche]

lol


If you really want to trick out your ride, get a gold plated lorcin and have it used as the shifter knob.


Alas, the Lorcin....she is gone. :crying:

[texasheat16]

You pull your gun out to just to impress girls? What the heck are you thinking!

As a responsible gun owner, you can use that gun for so much more than just impressin' yo ho's!

1. Low on cash? Get the "Glock discount" from your local gas station attendant next time you need to fill up yo' ride.

2. To hell with traffic jams, drive with yo' gat visible to other drivers and they'll always give you the right of way.

3. New year's eve, July 4th or labor day isn't complete without killin' the sky with yo' gat. Load up them clips and fire wildly into the air. The moon be askin' for a shower of bullets!

fo. You can impress more than just girls. What about gaining the respect of your local police? make sure you flash that thang at them so they know you're a real man now.

5. With a new gun comes great responsibility. Join our club and learn how to act like a responsible adult. Here's a video of our exclusive hommies club
http://www.youtube.com/watch?v=g3VymMYgozI


peace dawg...

[texasheat16]

:tongueout:

you need help if you really take my sarcasm seriously.

[texasheat16]

http://www.youtube.com/watch?v=P01AEM8VrFs&feature=related

[Another Miller]

Just be glad you got rid of it.Lorcins are so bad that even those buybacks have caught on and wont give full credit.



I overheard someone say lorcin is nicrol spelled backwards..reason enough to avoid them.lol.There must be some reason gunsmiths absolutlely refuse to work on them and that must be it.

[Gerard LeDouche]

I am very tempted to try shooting this thing sideways.

I have been practicing in the mirror, unloaded of course.

[Another Miller]

be careful about practicing in front of mirrors.I remember reading about 1 guy that out drew himself and became so emotionally scarred from it, he never went shooting again and lived in a basement like a hermit for the rest of his days,only coming outside to get the paper.


lol

[sfguard]

I am very tempted to try shooting this thing sideways.

I have been practicing in the mirror, unloaded of course.

At least mommy had the brains to tell you to keep it unloaded.

[Gerard LeDouche]

Just got in from the club, man....I lusv me some Courvisier.

gonna roll in my bed a sleep ioff.

[M11/9forfun]

....I lusv me some Courvisier.

Man for the price of that you could have bought another Lorcin to use as a back-up to your Glock:wow:

[M11/9forfun]

http://i36.photobucket.com/albums/e18/G21forme/115356.jpg

Don't forget you needz thez if gonna shoot gangsta (I mean sideways...):supergrin:

[RemSp10]

I thing gerard is left handed . do they make them for left hand folks:rofl:
think i get some o them fer my 1911 :dunno:

[M11/9forfun]

I thing gerard is left handed . do they make them for left hand folks:rofl:


Nahhh man---lefties just hold the gun up higher sideways and lean their head onto their right shoulder so they just use the sights upside down---besides since they wear their hats sideways it all balances out:rofl::rofl:

[Gerard LeDouche]

MFer!!

:steamed:

My Mom has hidden my G19!!

Said I owe some money, told her I need the gun so I can hit the pawn shop!

She won't give it back until I give her at least half of what I owe.

I am tired of this, I am going to get my own place when we get this hashed out.

[sfguard]

MFer!!

:steamed:

My Mom has hidden my G19!!

Said I owe some money, told her I need the gun so I can hit the pawn shop!

She won't give it back until I give her at least half of what I owe.

I am tired of this, I am going to get my own place when we get this hashed out.


I thought I saw a posting on another forum by a Mrs. LeDouche offering a slightly used G19 for sale. I think she was asking for $150 or a nice Lorcin in exchange for it. :whistling:

[Usingmyrights]

I thought I saw a posting on another forum by a Mrs. LeDouche offering a slightly used G19 for sale. I think she was asking for $150 or a nice Lorcin in exchange for it. :whistling:

She said I could have it for $100 since I was so charming.

[texasheat16]

This thread is still alive!

Maybe you should get a new mom instead.

[Andy W]

MFer!!

:steamed:

My Mom has hidden my G19!!

Said I owe some money, told her I need the gun so I can hit the pawn shop!

She won't give it back until I give her at least half of what I owe.

I am tired of this, I am going to get my own place when we get this hashed out.

When you walk into the pawn shop with the G19, be sure to walk in holding it in your hand without the box so you don't have to mess with getting it out of the box. Make sure the slide is down, it is easier to carry that way. Have a "clip" in it too, you will get a better deal on it.

This is especially true for going into a real gun shop.

[sfguard]

She said I could have it for $100 since I was so charming.

The Charming thing was always my downfall

[brahmabull8413]

I said it about 5-6 page's ago, STICKY?? This is too funny to lose.

[RemSp10]

[QUOTE=Rem. Sp. 10;9353664]Nice job Gerald :wow:.If i could make a suggestion ,what i would do is lock up mama and keep the bullets out.
--------------------------------------------------------------------------


See you diden't listen and look where it got you.:notlistening:

[Usingmyrights]

I can't believe this actually made 10 pages. Its slowed down some, but still going.

[maxmanta]

When you walk into the pawn shop with the G19, be sure to walk in holding it in your hand without the box so you don't have to mess with getting it out of the box. Make sure the slide is down, it is easier to carry that way. Have a clip in it too, you will get a better deal on it.

Wear your ski mask. It's cold out there,

[SergeantC]

This thread is still alive!

Maybe you should get a new mom instead.


Maybe he could get a Lorcin for her.

[sfguard]

Maybe he could get a Lorcin for her.

I might give him one for her he needs to post a picture. Depending I might even go as high as a Jennings, maybe even a high point or a raven

[Blast]

Anybody remember the .25 Titan by FIE?:supergrin:

[RemSp10]

I feel sorry for the poor boy ,seems like every way he turns ,he get kicked it the butt. If i weren't for bad luck ,he would have no luck at all. I think we should take up a collection and get him a nice cell (woooops I mean apt):rofl:
A pic of mom would help to see what poor ole Gerard has to put with.:whistling: OR maybe we could help him find her a boy friend.:dancingbanana: Or as stated get her a Lorcin of her own.

[Gerard LeDouche]

OK, I got the $$ for Moms....i like the idea of a new Moms.

Anyway, heading to the gun store first to see what I can get for it. If the $$ is not good enough I am heading to the pawn shop. They have some kickin' speakers that they demo'ed for me the other day....hmmmm.

[Jimmylh]

Big news, I have decided to get a Glock 19. They have a used model that is 3rd ? generation, with night sites, case, mags, etc...

I get to use the $250 as a credit!!

What type of ammo would you guys recommend for practice and carry?

I passed on the Professional Ordinance thingie for now.

Dude! NO NO NO!! Don't get a G19. Don't you know that 1 out of 3 of those things will KB on the first box of ammo? I made the same mistake as you and traded in what I had for a 19. They call me "Lefty" now. Nuff said.

[G21forME]

OK, I got the $$ for Moms....i like the idea of a new Moms.

Anyway, heading to the gun store first to see what I can get for it. If the $$ is not good enough I am heading to the pawn shop. They have some kickin' speakers that they demo'ed for me the other day....hmmmm.

Dude I don't think pawn shops deal in used moms, you'll have to go underground for that transaction.

[MikeDawg]

Well, I am going to take it to the range tomorrow since I am off for the week.

If I have problems with it, I have a warranty to fall back on.

Lorcin is a solid company, right?

The lady at the gun store said they sell a lot of them with 0 problems.

vafish, no, no troll here. I have seen enough of those jacklegs on my gamer sites. lol

Something tells me I should have come here first, but I was so excited with the purple grips on this one. I thought about getting 2, but I don't get paid until the end of the month and with a baby on the way $$$ is tight.

I had thought Lorcin went out of business.

[JayPap]

I paid $200 OTD for the gat, $130 for the cilps.

Oh, by the way, my name is Gerard. :upeyes: :tongueout:

Kinda misse the Lorcin now, the chicks were impressed when I pulled it out.

Now they will probably think I am a narc or gang banger.

If the chicks are impressed when you pulled it out you should show it to the next Policeman you see, a lot of them carry Glocks he will probably be so excited he'll call some friends to see it.

[SergeantC]

If the chicks are impressed when you pulled it out you should show it to the next Policeman you see, a lot of them carry Glocks he will probably be so excited he'll call some friends to see it.

Of course, the cop might take it from you. Most of them are forced to carry Glocks, but WANT to carry Lorcins.

[osiruscyn]

why pawn the gun when you could trade some dude for it on the street for some speakers? He might even be nice enough to just leave the car alone so you can take what you want from it. Since he's not there, you might able to just take the gun too. You aren't thinking this through douchey douche.

[Gerard LeDouche]

Check out this Youtube video.

It is a great parody of Rudolph as Martin Sheen in Apocalypse Now called A Pack of Gifts Now.

Those who have seen Apocalypse Now will get it, doubt you ladies will get it.


http://www.youtube.com/watch?v=Wk2G8Gsi4G0

[moeman]

Check out this Youtube video.

It is a great parody of Rudolph as Martin Sheen in Apocalypse Now called A Pack of Gifts Now.

Those who have seen Apocalypse Now will get it, doubt you ladies will get it.


http://www.youtube.com/watch?v=Wk2G8Gsi4G0