New magazines = more white nail polish...

[oldgraygeek]

Got a great deal on three G20 magazines for $15.99 each, and a G20-to-G29 filler sleeve, from OMB's Express (with free shipping)... so I naturally had to fill in the engraving, and take a new group photo:
http://img168.imageshack.us/img168/1931/3jan08004swao2.jpg

(There are also 112 rounds of hollow-point 10mm ammo in this photo, mostly DoubleTap).

[SCmasterblaster]

I wonder if I can do the same with office white out?

[myg30]

Real nice, you can get paid to dress-up guns on this site I bet !!

[KAPSIG1]

What is the method you use to do it?

[myg30]

I bet lots of patients.

[Steve Koski]

Sweet pics dude!

[oldgraygeek]

What is the method you use to do it?1. Paint a thick coating of polish over each engraving... enough to fill the letters.
2. Let it dry for about 2 minutes.
3. Moisten a paper towel with polish remover.
4. Rub the towel quickly back and forth over the polish, removing the excess but not the polish in the engraving.
5. Let it dry again (the polish in the lettering may have softened from the remover).
6. Clean up any white leftover between the engravings.

[Resqu2]

I was too lazy to do all the numbers in my mags, I only have 12 but two of them are 33 rounders and 4 are 17 rounders, I like the look so maybe I will start with my mags for my 27 and see how it goes.

Good job and nice pics

[G36Packer]

I did the .40 my G23 mags in white and the 9mm on the G19 mags in pink so I wouldn't get them mixed up. I also put a pink dot on the button in the baseplate of the G19 mags to make it a little more obvious.

[KAPSIG1]

1. Paint a thick coating of polish over each engraving... enough to fill the letters.
2. Let it dry for about 2 minutes.
3. Moisten a paper towel with polish remover.
4. Rub the towel quickly back and forth over the polish, removing the excess but not the polish in the engraving.
5. Let it dry again (the polish in the lettering may have softened from the remover).
6. Clean up any white leftover between the engravings.


Thanks for the Directions