G26 + Can

[9mmkungfu]

Is anyone running a G26 with a can? Specifically an AAC Evo-9? Just curious as I'm about to pick one up and just wondering if it would work on my G26. It's going on a Beretta 92FS but it would be neat if it worked on a couple other 9's I have :):supergrin:

[lastevolution]

You could do it.

If you want to be cheap, get a G19 barrel and thread it correctly.

Or just buy one from LWD.

[UZIFORME]

AAC specifically made a smaller silencer called the Evo 9 CQB for the G26 unless you play with recoil springs I do not believe the Evo 9 std will work on the smallest of guns. I use one on a Glock 19 just fine.

[william_h]

I've got an Evo-9 as well and I had also planned to get a G26 with LWD barrel to try out. So who wants to be the guinea pig?

[wack86]

I've got an Evo-9 set up on a g26 and it works just fine. I have a LWD threaded barrel. I usually use it on a g23 with conversion barrel though.

[william_h]

I'm curious, is it noticeably louder on the G26?

[wack86]

I don't really notice a difference, but then again, I am behind it.

[william_h]

I was just wondering, I think I'm going to try it on my G26

[Glock'N'Load]

I have had the same question except I am using a G27 with a 9mm conversion barrel for the G23 so the barrel sticks out a little and hopefully with help in cycling by reducing the slope of the barrel. I have a SWR Trident 9 on order. I hate the waiting

[wack86]

How does that 23 barrel work on the 27?

[Glock'N'Load]

,How does that 23 barrel work on the 27? I dont know yet. My Trident is on order. SWR is suppose to ship it this week to my dealer. Then I hav to wait for the 2-3 months for the ATF to approve my trust. Then I will give a full repot

[Glock'N'Load]

I asked JR at lone wolf and he said that the 9mm conversion for the G23 will fit in the G27 but not a conversion barrel for the G22 (17 length) I know its confusing. SWR shipped my Trident to the dealer I bought from (major Malfunction) then i have to wait till he ships it to my local class III dealer.

[myglockisa23]

Is anyone running a G26 with a can? Specifically an AAC Evo-9? Just curious as I'm about to pick one up and just wondering if it would work on my G26. It's going on a Beretta 92FS but it would be neat if it worked on a couple other 9's I have :):supergrin:

I had a G26 with LW and EVO-9 combo... no issues at all.... I prefer the G17....with the Evo and Wolf 147g JHP

http://i6.photobucket.com/albums/y212/dwaine/P1010133.jpg

http://i6.photobucket.com/albums/y212/dwaine/P1010226.jpg

[Chris G Thomas]

I just went through this myself as I wanted to suppress a Glock 26. I chose the AWC Titanium Abraxas, a new KKM precision barrel that I bought from AWC, and a brand new Glock 26.

I only have maybe a box and a half through it and for the first 25-30 shots, it was single shot with the case usually not extracting. However, by the end of the first 50 or so shots, the new silencer, new barrel, and new Glock 26 seemed to be starting to get along better. The longer I keep shooting it, the more shots now work in succession. I am up to about 5 or six rounds before a jam now. And sweeeeet Lord is this combination QUIET!!! I will get around to posting some video at some point, but I am very happy with my set up.

I am sure that the more rounds I put through it, the more the new components of this system will "wear in" to each other and the reliability will continue to improve.

Here is a pic:

[wack86]

Here is my G23 9mm / EVO 9 set-up that runs perfectly. You can even see the brass in the air.

[DriBak]

So that is a stock 23 with a threaded 19 barrel ? What subsonic 9mm do you use?

[wack86]

It's a stock g23 with a lone wolf g23/9mm threaded conversion barrel. I use g19 magazines. I shoot the 147gr winchester. They are subsonic. They make a nice 'thud' on target.