Post Pics of Your Competition Pistols!

[CPUFed]

Ok, let's see 'em. I'm curious what everyone is using. Let's get this thread going! :wavey:

Glock 34 with Dawson Precision fiber optics, TruGrip tape

http://img.photobucket.com/albums/v505/cpufed/DSC02879.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC02880.jpg

[Suburban]

http://img.photobucket.com/albums/v480/suburban15/MiniReflexSights/G17RaceGun.jpg
G17. I put a pin at the front end of the mount to use as a front sight to find the dot, but I don't need it anymore. Someday, I'll get around to hacking the plate shorter, and paint it black to match.
I have not put a lot of rounds through it yet, but I don't think it's gonna choke on the brass anymore.

http://img.photobucket.com/albums/v480/suburban15/Firearm%20Pics/G17-2.jpg
Also G17. Carry it pretty much all winter and parts of spring and fall. Pop a reduced power firing pin spring, and maybe a 13 lb. recoil spring in and shoot IDPA and club matches with it. Have done pretty well with it, even with a 4+ pound trigger pull.

I've got a G19 that will likely get the same treatment as the 2nd G17. Have not put enough rounds through it yet, and I'm waiting on the new Heinie sights.

As soon as Lone Wolf gets the 5.5" G20 slides in (:whistling:) I'll start working on a Limited/ESP pistol. Just have to decide on what adjustable sights to use.

:goodpost: :popcorn:

[WellArmedSheep]

My IDPA G17:
http://img.photobucket.com/albums/v312/scrcteach/Shooting/IMG_5910.jpg

My IPSC Limited G22 project:
http://img.photobucket.com/albums/v312/scrcteach/Shooting/IMG_7149.jpg
Need to take some more recent photos of the 22.

[Glock2234]

G-34 IDPA SSP/USPSA Production
150805
G-34 IDPA ESP
150806
G-21 Project for next year
150807

[hanexp]

uspsa production
http://i24.photobucket.com/albums/c13/hanexp/glock17comp1.jpg

[kglocker]

My G35 with Sevigny Competition sights, Dawson Ice Magwell, GlockWORX trigger, Arredondo mag extension, JP Ent. extended mag release and Ghost Holster.

http://worleyphoto.com/g35/g35.jpg

http://worleyphoto.com/g35/g35inghost.jpg

http://worleyphoto.com/g35/ghostholster.jpg

[Glockmeister40]

I know it aint pretty but it is not a safe queen This thing is a tool and a fine one for it"s job :)


http://i189.photobucket.com/albums/z122/Rspaulding_photo/Misc-1.jpg

[hanexp]

sorry for the double post

[cougar_guy04]

Not much here:
http://i299.photobucket.com/albums/mm309/cougar_guy04/DSCN3658.jpg
Box Stock G34 w/ Decal Grip and a Plug.

Before the end of the year it'll have a TruGrip, Warren Tactical sights w/ FO Front, LWD Overtravel Stop, stainless steel guide rod, and some polished up the internals.

[keakster]

my major .40

http://i133.photobucket.com/albums/q76/keakster/DSC01373.jpg
http://i133.photobucket.com/albums/q76/keakster/DSC01370.jpg
http://i133.photobucket.com/albums/q76/keakster/DSC01371.jpg

[dking1]

G-34 Open gun attempt
Carver competition mount w/C-more sight
Dawson super heavy magwell w/ grip slug
Lone wolf trigger over-travel stop
Full length stainless steel guide rod
Dawson +5 mag extension

[blownhemi]

I see a few guys have got those slide rackers that fit in where your backplate sits - what do you think of them?

[Suburban]

The Mako slide racker was necessary when I had the ProPoint mounted, but now I don't really need it. I will take it off and put the standard Glock plate back on before I shoot it next time.

On mine, the handle shoots loose, and before long ends up at my feet.

[blownhemi]

The Mako slide racker was necessary when I had the ProPoint mounted, but now I don't really need it. I will take it off and put the standard Glock plate back on before I shoot it next time.

On mine, the handle shoots loose, and before long ends up at my feet.

Can you loctite it in place?

[Suburban]

Would work, but the handle part has to be removed to clean the pistol.

I tried adding a set-screw to hold it in, and that shot loose too. Just a pain.

[blownhemi]

Hang on, are talking that the whole piece falls out, or just the handle piece.

If it's the handle why does that have to be removed for cleaning, does the whole unit slip out of the slide like the standard backplate?

[glck17]

http://http://glocktalk.com/forums/attachment.php?attachmentid=151078&stc=1&d=1212412912

above, my ipsc G35 standard gun; below, my ipsc G17 production gun.

[Scrambler68]

my major .40

http://i133.photobucket.com/albums/q76/keakster/DSC01373.jpg


That's just sexy right there... I love the stipple job on the grip! :cool:

[Suburban]

Hang on, are talking that the whole piece falls out, or just the handle piece.

If it's the handle why does that have to be removed for cleaning, does the whole unit slip out of the slide like the standard backplate?

The handle falls out on mine, YMMV. There is a detent in the backplate, but it doesn't hold the handle in well enough. With my frame mounted scope mount, I can't remove the slide off the front of the frame if the handle is glued in. I could remove the whole unit from the back of the slide, but as I've said, I just don't need it anymore. With iron sights or a slide-ride optic, you could glue the handle in and still remove the slide for cleaning without removing anything.

The slide racker is held in just like the standard Glock backplate.

[blownhemi]

With my frame mounted scope mount, I can't remove the slide off the front of the frame if the handle is glued in.

Ding, the light goes on. I'm with you now. Hmmm, thats an interesting point.

So what do the guys with fixed slide rackers do, like the ones that fit into the rear sight slot?

[Epizza]

My IDPA Glock 17 & 34.

[keakster]

That's just sexy right there... I love the stipple job on the grip! :cool:

thanks, took hell of a work on that stippling job.

[GMAN40]

Nice pics guys!

[bwheeler03]

[QUOTE=WellArmedSheep;10557048]My IDPA G17:
http://img.photobucket.com/albums/v312/scrcteach/Shooting/IMG_5910.jpg

That is still the best looking 17 i've seen, IMHO.
Well done!

[CPUFed]

http://img.photobucket.com/albums/v505/cpufed/DSC02943.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC02946.jpg

[SDM]

Not much here:
Box Stock G34 w/ Decal Grip and a Plug.

Before the end of the year it'll have a TruGrip, Warren Tactical sights w/ FO Front, LWD Overtravel Stop, stainless steel guide rod, and some polished up the internals.
You'd better watch that plug if you're shooting production. It might put you in open with minor pf and iron sights.

Here are mine. The pictures aren't much though.
http://i104.photobucket.com/albums/m187/sdmidpa/Guns/IMG_0081-1.jpg
http://i104.photobucket.com/albums/m187/sdmidpa/Guns/IMG_0089-1.jpg

[blownhemi]

You'd better watch that plug if you're shooting production. It might put you in open with minor pf and iron sights.

Here are mine. The pictures aren't much though.

http://i104.photobucket.com/albums/m187/sdmidpa/Guns/IMG_0089-1.jpg

Nice to see a G17 more beaten up than mine. :supergrin:

[SDM]

Nice to see a G17 more beaten up than mine. :supergrin:
It really isn't all that beat up. Those scratches are from about 15 or 20 draws out of a silly Kytac holster (I had wiped down the inside too). It does need to be cleaned though.

[blownhemi]

It really isn't all that beat up. Those scratches are from about 15 or 20 draws out of a silly Kytac holster (I had wiped down the inside too). It does need to be cleaned though.


Hey, don't be ashamed of it dude. It's a shooter.

I'd rather see something with rounds down range than a safe queen.

[9x45]

All of those guns are way to pretty to have been in competition use, except for GlockMeisters, that's good and ground up. I was going to post up my G17, the one with about 150,00 rounds, but it's just to ugly compared to all those nice ones.

[cougar_guy04]

You'd better watch that plug if you're shooting production. It might put you in open with minor pf and iron sights.
I took it out before the state match and it's got a new home in the misc. parts box.

[gotboost562]

All of those guns are way to pretty to have been in competition use, except for GlockMeisters, that's good and ground up. I was going to post up my G17, the one with about 150,00 rounds, but it's just to ugly compared to all those nice ones.

Wheres the pics? :tongueout:

[SDM]

I took it out before the state match and it's got a new home in the misc. parts box.

That's what I've done with mine. I can't see where it really helps that much anyway. Kinda ironic that I have to take parts off my IDPA ssp to play the gamers' game.

[ecmills]

All of those guns are way to pretty to have been in competition use, except for GlockMeisters, that's good and ground up. I was going to post up my G17, the one with about 150,00 rounds, but it's just to ugly compared to all those nice ones.
Just do what I do, and blast/duracoat it every six months when you've sanded off the finish with your holster. :supergrin:

[gotboost562]

I have just started to get into competition shooting. I have gone to one GSSF match and 2 local steel matches with this G17. It has Sevigny Competition sights, Trugrip tape, LWD guiderod with 13 # ISMI spring, and a Glockworx trigger. The tape, guide rod, recoil spring and trigger were added recently and I haven't shot with them yet. Nothing real special here:

http://i33.photobucket.com/albums/d57/gotboost562/Glock%2017/DSC02726.jpg

The range setup is a Kytac SooperHooper holster, CR Speed mag pouches, and a CR Speed belt:

http://i33.photobucket.com/albums/d57/gotboost562/Glock%2017/DSC02729.jpg

[edwardscad]

http://members.cox.net/mikem.bluesierra/PICT2402.JPGOn its third barrel.

[MarkP]

http://azidpa.net/glock17.jpg

[mscott]

http://i66.photobucket.com/albums/h270/mscott_photos/open%20glock/openglocksjc-1.jpg

[CPUFed]

http://i66.photobucket.com/albums/h270/mscott_photos/open%20glock/openglocksjc-1.jpg

Very nice...

[kglocker]

I just finished putting together an Open top end for my G35 (which I have been shooting in Limited). So, same GlockWORX trigger, Dawson Ice magwell, etc, but top end is mainly Lone Wolf including the slide, barrel and comp. Red dot is a Burris FastFire mounted directly to the slide and then there's my homegrown crappy charging handle :whistling:

I've only had it out to sight in at the range. Think I'll shoot it in competition this coming Saturday and see how it does.

Limited:

http://www.worleyphoto.com/g35/g35.jpg

And with the Open top end:

http://www.worleyphoto.com/g35/opentopend1.jpg

http://www.worleyphoto.com/g35/opentopend2.jpg

[cougar_guy04]

That's what I've done with mine. I can't see where it really helps that much anyway. Kinda ironic that I have to take parts off my IDPA ssp to play the gamers' game.
Looks like I can put the plug back in:
http://www.uspsa.org/rules/nroi_rulings.php?action=edit&indx=34

[SDM]

Yeah, I heard about that. Now I can use my IDPA gamer gun in USPSA :whistling:.

[Pinki]

http://img.photobucket.com/albums/v395/Piscesgirl/PinkGlock.jpg
http://img.photobucket.com/albums/v395/Piscesgirl/PinkGlock2.jpg

[Roland-G23]

http://i66.photobucket.com/albums/h270/mscott_photos/open%20glock/openglocksjc-1.jpg

Hey, I sold that top-end to you.

Nice to see its still in use.

[mscott]

Hey, I sold that top-end to you.

Nice to see its still in use.


Thanks again :cheers: I like it.

[Knee Deep]

G-34 with magna ported barrel, by SJC

http://glockjockey.com/

USPSA Open, 9mm Minor, B Class
Used in Steel Match also.

[GMAN40]

Nice to see a G17 more beaten up than mine. :supergrin:

Worn maybe! But it still goes BANG!

[ks40sw]

Nice pics and setup everyone.:thumbsup:

Here's mine again.:supergrin:

http://i160.photobucket.com/albums/t172/tammyx51/G24race.jpg
http://i160.photobucket.com/albums/t172/tammyx51/G24race1.jpg
http://i160.photobucket.com/albums/t172/tammyx51/G24race2.jpg


ks40sw

[Pinki]

That's a nice looking gun, ks40sw :thumbsup:

[ks40sw]

That's a nice looking gun, ks40sw :thumbsup:

Thanks and yours fit your username really well.:supergrin::wavey:

ks40sw

[Pinki]

Thanks and yours fit your username really well.:supergrin::wavey:

ks40sw

:supergrin::supergrin: Thanks :wavey:

[johes]

On top is a veteran of many IDPA matches, and the one on the bottom will see it's first match Sunday.

http://img237.imageshack.us/img237/4119/img0052wk2.th.jpg (http://img237.imageshack.us/my.php?image=img0052wk2.jpg)

[SDM]

On top is a veteran of many IDPA matches, and the one on the bottom will see it's first match Sunday.

Traitor!:cool:

[johes]

Yeah, I know, :embarassed: but it shoots so dang good!

[9x45]

1st gen G19 for IDPA, got about 150,000 rounds thru it before the fire...

[CPUFed]

http://img.photobucket.com/albums/v505/cpufed/DSC03197.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC03201.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC03192.jpg

[Calmwater]

grip plugs are legal in production now if there is no added weight, like with the jentra plug.

[HighVelocity]

I mostly shoot IDPA. Either SSR, CDP or ESP.

SSR

http://i242.photobucket.com/albums/ff184/HV2_photos/686-5.jpg

CDP

http://i242.photobucket.com/albums/ff184/HV2_photos/SA_TrophyMatch_Upgrades.jpg

ESP

http://i242.photobucket.com/albums/ff184/HV2_photos/Slippery34.jpg

[Mtrclass]

My daughters Open Gunhttp://i64.photobucket.com/albums/h198/BobHostetter/100_0672-1.jpg

[marvin]

http://i66.photobucket.com/albums/h270/mscott_photos/open%20glock/openglocksjc-1.jpg

is that a 24 or a 17L with a comp? if so where did you get the barrel?

oh, my gun has over a 100,000 rounds through it and i've retired the lower for a CCF




http://www.barbour.us/uspsa/dsc_0025.jpg

[Flexmoney]

Retired?

Did you paint the CCF lower green???

[marvin]

Retired?

Did you paint the CCF lower green???

no, it's not green.... yet:upeyes: green skateboard tape will come soon.

i've had this frame for a couple of months. first thing i noticed was the trigger got better. i've got a lonewolf 9mm barrell for my 24 slide, and it worked OK on my glock frame. on the CCF it was crap, so put the kkm .40 back in and so far(400 rounds)it's been 100%. groups were cut in 1/2. slide lock up and barrel are wicked tight. i didn't think it would work at all.

[marvin]

still don't know how to use the computer

[mscott]

is that a 24 or a 17L with a comp? if so where did you get the barrel?

oh, my gun has over a 100,000 rounds through it and i've retired the lower for a CCF




http://www.barbour.us/uspsa/dsc_0025.jpg


It's a 24 slide with a KKM barrel in 357sig.

[marvin]

It's a 24 slide with a KKM barrel in 357sig.coool, thanks

[outsider0506]

Here's my latest USPSA Open Glock configuration:

- Glock 17C base gun
- KKM G34 Drop-In Barrel (throated for 1.15" OAL rounds, cut and threaded)
- SJC Aluminum 9mm Major Comp
- Tungsten guiderod with ISMI 13lb spring
- 8 MOA JPoint
- Dawson Precision BlackIce (super heavy) Magwell
- Glockworx reduced and sandblasted grip job
- Glockworx Fulcum Trigger and Lightened Striker

[BuckyP]

Yeah, I heard about that. Now I can use my IDPA gamer gun in USPSA :whistling:.

Yeah, I was very happy with that ruling. Now I'd like to see the allowance of steel guide rods in SSP. They are allowed on the M&P, since they already come with steel.

[outsider0506]

I'm trying out different comps. Here's the Jager comp....

[JakAttak]

http://i205.photobucket.com/albums/bb244/JakAttak556/66aaa987.jpg

G35- Dawson sights & Magwell, Fulcrum trigger, tungsten guide rod, and 13# ISMI spring.

http://i205.photobucket.com/albums/bb244/JakAttak556/0157fbc6.jpg

STI .38 Super

Jack
A33941

[JakAttak]

I've tried twice now to post pics in this forum. Neither one worked. Does any one have any suggestions?

THX,
Jack

[JakAttak]

http://i205.photobucket.com/albums/bb244/JakAttak556/66aaa987-1.jpg

[JakAttak]

I guess 1024x768 was to big for this forum.

http://i205.photobucket.com/albums/bb244/JakAttak556/0157fbc6-1.jpg

Jack
A33941

[Mtrclass]

Just finished for a customerhttp://i64.photobucket.com/albums/h198/BobHostetter/100_1272.jpg

[Broylz]

tagged. i recently got a OD 35 and will be picking up a 17 w/ a LWD 34 slide today hopefully. its a start to my game play.

[Oldskoolfan]

I've tried twice now to post pics in this forum. Neither one worked. Does any one have any suggestions?

THX,
Jack Do you have a photobucket account? Just load them and then click the link that says forum/message board. It will copy the link and then paste it into the thread.

[WellArmedSheep]

I've posted in this thread previously, but my 17 shot it's last match yesterday. Picked up a new G34 Friday and got a chance to do some modifications last night. Swapped some parts over from the 17 to the 34 (sights, springs) and shot a match with it today. Worked great! Yeah, I know there's not a huge difference between the 17 and the 34, but my dealer got a green one in and I just had to have it.

http://img.photobucket.com/albums/v312/scrcteach/Shooting/IMG_8061.jpg

Also pictured is my carry 19...I like the green Glocks.