Today's GLOCK project....don't laugh!

[OD GASTON]

I know it is a small, but I am just starting the parts stash. I just want to get a few extra parts in case something breaks. Started off with 2 of a few.:wavey:
http://i298.photobucket.com/albums/mm271/ODGASTON_photos/dghj037.jpg

http://i298.photobucket.com/albums/mm271/ODGASTON_photos/dghj041.jpg

Lugi, I could'nt do the green mini magnum.....:rofl:

[JoshuaC]

Cool! Looks like you're ready for any type of breakage. Bet you'll hardly use them though. :)

[carbofan21]

better to have it and not need it... wow i just keep my spares in a plastic bag. you're organized!

[stanggt9050]

Looks like a good start...I was thinking of doing this myself, but instead of a part or two at a time I will probably get a field rebuild kit along with other various parts.

[myg23]

Nice set up.Soon as i get a couple more Glocks, then i can start my parts kit...:supergrin:

[sigcalcatrant]

I'm down to 11 Glocks. I shoot all of them, but I shoot the 9mm's A LOT. I've never needed any parts.

[kelsitone]

better to have it and not need it... wow i just keep my spares in a plastic bag. you're organized!
Me too. I keep a small box full of little plastic bags, each holding a part or parts.

I like having extra parts on hand. I would hate for one of my guns to go down and have to wait for parts to arrive. Plus, paying $8 to ship a $2 part would really bug me. :steamed:

[sphillips45]

I keep a few parts for my Glocks also

http://i7.photobucket.com/albums/y257/glock22_40/Parts-Kit.gif

[EdMan63]

I keep a few parts for my Glocks also

http://i7.photobucket.com/albums/y257/glock22_40/Parts-Kit.gif

Given the number of unused spare parts speaks strongly to the quality of the factory Glocks.:supergrin:

[OD GASTON]

Looks good sphillips45....I am gonna add more too. A couple of extra guide rods, and some other parts.

I hope I never need ANY of them, but I do like having them.:wavey:

[sigpro-fessor]

Pretty sweet. I need one of those for All of my guns, especially my AR15's.

[sigpro-fessor]

I keep a few parts for my Glocks also

http://i7.photobucket.com/albums/y257/glock22_40/Parts-Kit.gif

Pretty sweet.

[ecmills]

Looks like we all use relatively similar cases. :supergrin:

5 recoil springs, in different weights (labeled on masking tape)
2 or 3 trigger bars
An entire Vanek trigger kit
Several sets of spring cups, trigger springs, trigger bars, trigger housings,
5 striker springs (a vanek, 2 glockworx, a stocker, and 2 Wolff's)
slide stops, and mag catches.
A spare striker
AAA batteries for my earmuffs
Orange slide cover plate
Armorers tool
2 sight tools, Loctite
compact cleaning kit-in-a-handle
Swiss army knife
2 flavors of gun oil
Flat screwdriver and a couple of picks for detail work
5 or 6 connectors

...And probably a dozen other things down in the bottom.

http://home.off-road.com/~mithrandir/parts/IMG_1195.JPG

http://home.off-road.com/~mithrandir/parts/IMG_1196.JPG

http://home.off-road.com/~mithrandir/parts/IMG_1197.JPG


This box is a bit different. It's the 'support' box for my hatcam setup (first person video like these (http://www.youtube.com/profile_videos?user=MemphisMechanic)). Both of these go with me to every match I shoot.

http://home.off-road.com/~mithrandir/parts/IMG_1199.JPG

[Lugi]

I know it is a small, but I am just starting the parts stash. I just want to get a few extra parts in case something breaks. Started off with 2 of a few.:wavey:
http://i298.photobucket.com/albums/mm271/ODGASTON_photos/dghj037.jpg

http://i298.photobucket.com/albums/mm271/ODGASTON_photos/dghj041.jpg

Lugi, I could'nt do the green mini magnum.....:rofl:


Ya think!!!!!!!!!! :rofl:

Nice kit........ ya got going on! And thank you, you gave me an idea to label the compartments!

[OD GASTON]

Ya think!!!!!!!!!! :rofl:

Nice kit........ ya got going on! And thank you, you gave me an idea to label the compartments!

:thumbsup:

[3rdgen40]

Cool parts assortment there OD , but the labeling seems a little OCD ... :upeyes:

[Lugi]

Cool parts assortment there OD , but the labeling seems a little OCD ... :upeyes:


No it's not!, it's good if ya don't know the parts that well!:supergrin:

[Panzerfaust]

I know it is a small, but I am just starting the parts stash. I just want to get a few extra parts in case something breaks. Started off with 2 of a few.:wavey:
http://i298.photobucket.com/albums/mm271/ODGASTON_photos/dghj037.jpg

http://i298.photobucket.com/albums/mm271/ODGASTON_photos/dghj041.jpg

Lugi, I could'nt do the green mini magnum.....:rofl:

You aren't going to see me laughing too much. It's a damned good idea.

[3rdgen40]

No it's not!, it's good if ya don't know the parts that well!:supergrin:
Are you saying that OD doesn't know what parts he has ? :whistling:

[AgentM79]

The labels are a damned good idea. My cardboard shoebox is shameful by comparison. MUST RECTIFY!!

[NYC Drew]

I have a similiar setup, and it's similiarly labeled. Also, since I have a bit more than a few glocks, I have parts for all calibers /frames /slides available in the USA.

I also have mags in labeled bins.

May post pics later.

'Drew

[OD GASTON]

I have a similiar setup, and it's similiarly labeled. Also, since I have a bit more than a few glocks, I have parts for all calibers /frames /slides available in the USA.

I also have mags in labeled bins.

May post pics later.

'Drew

Let's see it.....:wavey::wavey:

I have all my ammo cans labeled aswell. I love that little labeler.....

[eddief4]

i like your parts. the labeling is a Great touch:wavey:

[Lugi]

Let's see it.....:wavey::wavey:

I have all my ammo cans labeled aswell. I love that little labeler.....

See I've done that with my ammo cans, just never thought about my liitle kit!:supergrin:

http://i63.photobucket.com/albums/h153/HIJODEPERRA/000_0602.jpg

[Lugi]

Are you saying that OD doesn't know what parts he has ? :whistling:


Nope!

[Fallguy173]

Overacheivers!:whistling:

Yes I'm jealous...:wavey:

Gives me something to build on. Thanks for the pics guys.

[Lugi]

Oh, hell...........here mine again! :whistling:
Sorry to the guys that seen it......... alot!
http://i63.photobucket.com/albums/h153/HIJODEPERRA/000_0466.jpg
http://i63.photobucket.com/albums/h153/HIJODEPERRA/000_0465.jpg

And to show the size a G19 mag! :supergrin:
http://i63.photobucket.com/albums/h153/HIJODEPERRA/000_0467.jpg

[MSB9021]

That looks eerily similar to a setup that I have. Using PLANO compartmental tackle boxes of various sizes, I have parts for my Glocks, as well as my double and single-action Rugers. I might use those parts one day, but so far - none at all. I do have a section in one for plugs and 3.5 connectors that go into any new acquisition (but non-carry) Glocks, but that's it.
Nice setup!!

[Lugi]

That looks eerily similar to a setup that I have. Using PLANO compartmental tackle boxes of various sizes, I have parts for my Glocks, as well as my double and single-action Rugers. I might use those parts one day, but so far - none at all. I do have a section in one for plugs and 3.5 connectors that go into any new acquisition (but non-carry) Glocks, but that's it.
Nice setup!!

Thank you! :wavey:

[G-30Jet]

Lugi, You are getting low on ammo. You better get with it! :):):)

[Lugi]

Lugi, You are getting low on ammo. You better get with it! :):):)

:embarassed:

They are all full! I'm sorry I can't do any better, I got like alittle over 7k of ammo! :(

[OD GASTON]

:embarassed:

They are all full! I'm sorry I can't do any better, I got like alittle over 7k of ammo! :(


Lugi, when I saw those ammo cans labeled and stack liked that I thought you had snuck into my closet......:rofl::rofl:

[tampashooters]

I have a similar setup, but not labeled. I can tell what's what.

[Macleod1518]

152433wow my lables are a little on the large side, but easy to see

[eddief4]

Oh, hell...........here mine again!
Sorry to the guys that seen it......... alot!
http://i63.photobucket.com/albums/h153/HIJODEPERRA/000_0466.jpg
http://i63.photobucket.com/albums/h153/HIJODEPERRA/000_0465.jpg

And to show the size a G19 mag! :supergrin:
http://i63.photobucket.com/albums/h153/HIJODEPERRA/000_0467.jpg






that's a Big Mag:wow:

[OD GASTON]

152433wow my lables are a little on the large side, but easy to see

Hey, whatever works......and they're reflective too!!!!:rofl:

[Lugi]

Lugi, when I saw those ammo cans labeled and stack liked that I thought you had snuck into my closet......:rofl::rofl:

:supergrin:

[Lugi]

that's a Big Mag:wow:

:tongueout: