Different 3.5 lb connectors

[Lawdawg112]

Just did some testing on three different connectors and I thought I would share the results.

To start off with, its a new G34 with a .25c trigger job, has around 7-800 rounds through it with the wolf reduced power firing pin spring, plunger spring and trigger spring. It also has the titanium polished plunger from glockwerx.

The stock 3.5lb connector was polished and the trigger broke around 4 lbs.

I took out the stock connector and put in a Glockwerx's 3.5 lb connector and the trigger broke at about 2.75

I took out the Glockwerx's connector and installed a Ghost rocket with the overtravel tab. The package with the Ghost rocket installed came away with 2.8 lb pull.

With the Ghost Rocket though, the reset was about 1/4 of what the reset was with the other 2. Can't wait to try it, double taps are going to be even better. It's a smooth pull then just as you start to feel some resistance it breaks nice.

The Ghost Rocket is staying in.:cool:

[randyc74]

Lawdawg
Very informative thread. I have a NY1 trigger spring with a LWD 3.5 connector in my Mod.23. The Mod.23 is my duty weapon. I really like that combination.

Today, I installed a NY1 trigger spring and a LWD 3.5 connector in my Mod.34 comp. gun.

I did a .25 cent trigger job on both pistols. I like the trigger pull consistency of both weapons. I have an older mechanical trigger scale. I plan to check then both out and see how close they are in trigger pull weights.