Tactical Shotgun Pics Thread

[Angry Fist]

:milestone:

[FLuXmr2spyder]

http://img.photobucket.com/albums/v476/fluxmr2spyder/my%20firearms/IMG_1028.jpg

[debbert]

I use a TriStar Cobra Force pump shotgun with tactical grip and red dot scope. In the event that my Red Dot fails, I can still see the ghost ring sights through the Red Dot lens.

It hangs on a bolted wall mount and I run a steel cable through the trigger guard when I leave the house, or when I have company. Here are some pics:

http://i40.photobucket.com/albums/e222/debbert/DSC01422.jpg

http://i40.photobucket.com/albums/e222/debbert/DSC01417.jpg

http://i40.photobucket.com/albums/e222/debbert/DSC01425.jpg

[Cletus]

Mossberg 500 persuader
http://img695.imageshack.us/img695/3240/dsc0032sx.jpg

[Angry Fist]

Mossberg 500 persuader
http://img695.imageshack.us/img695/3240/dsc0032sx.jpg
Man, I loved mine. Soooo much can be done with them. :supergrin:

[TedG]

TactiCoool..... NOT.
If I was to give it a name, it would be KODAK... point 'n shoot.

http://i70.photobucket.com/albums/i90/TedG954/Miscellaneous/WIN1300DEFAnti-TactiCool.jpg

[Veedubklown]

TactiCoool..... NOT.
If I was to give it a name, it would be KODAK... point 'n shoot.

http://i70.photobucket.com/albums/i90/TedG954/Miscellaneous/WIN1300DEFAnti-TactiCool.jpg

Black? Check.
Synthetic stock? Check.
Hi-cap mag tube? even factory stock counts :whistling: Check.

Looks tacticool to me! I'll shoot it. I like tacticool guns :tongueout:

[TedG]

Black? Check.
Synthetic stock? Check.
Hi-cap mag tube? even factory stock counts :whistling: Check.

Looks tacticool to me! I'll shoot it. I like tacticool guns :tongueout:

.....but I don't want to be cool. :faint:

[B Coyote]

But being uncool is what all the cool kids are doing now.

Nice pic, Cletus. Simple, and to the point. :)

bc

[SDGlock23]

Sorry for poor quality.

870 Atacs, would like a red dot sight maybe?
http://img10.imageshack.us/img10/6521/20110628203938.jpg

870 Exp. Super mag w/18" barrel and wilson tube extension
http://img143.imageshack.us/img143/8383/20110628204142.jpg

[xx78]

Sorry for poor quality.

870 Atacs, would like a red dot sight maybe?
http://img10.imageshack.us/img10/6521/20110628203938.jpg

870 Exp. Super mag w/18" barrel and wilson tube extension
http://img143.imageshack.us/img143/8383/20110628204142.jpg

I have the same 870 as you. I just put a primary arms micro red dot on it. So it has stood up to the recoil of approximately 400 rounds of both buck and slug. Its low enough to still be able to get a good check weld. I like it so far and only cost around $85 shipped.

[Angry Fist]

Brute Force!

Converted Saiga 12 and Glock 20.


http://i809.photobucket.com/albums/zz13/MO_FUGGAZ/100_3749.jpg

[Scattergun1187]

Red Jacket Saiga S-12 SBS 8"

Wilson Combat Remington Express Magnum 870's 14" & 12" SBS twins

[JD HHI 6092]

Here is my 870 Tactical and my FN SLP Mark 1.

[Bello]

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/264560_231121686910013_100000365501548_744514_3351291_n.jpg
Mods
1. Mesa tactical pic/weaver rail with 4 sureshell holder
2. Meprolight night sights
3. Nordic +2 mag ext. (7+1) right now
4. New spring and low drag aluminum follower
5. Nordic barrel/mag clamp with pic/weaver rail (future light)
6. 3.5" 00 buck
7. Mesa Tactical Urbino Stock ( Reduces LOP about 1 3/4 inches)
8. Bushnell TRS-25 Trophy Red dot

[SGT HATRED]

http://i132.photobucket.com/albums/q37/Merlin-X/2011-07-08135909.jpg
http://i132.photobucket.com/albums/q37/Merlin-X/2011-07-08135628.jpg
http://i132.photobucket.com/albums/q37/Merlin-X/2011-07-08135457.jpg
M3

[Teej]

TactiCoool..... NOT.
If I was to give it a name, it would be KODAK... point 'n shoot.

http://i70.photobucket.com/albums/i90/TedG954/Miscellaneous/WIN1300DEFAnti-TactiCool.jpg

I wish this was a Winchester................. but I like

[k357evin]

http://i397.photobucket.com/albums/pp59/zmonki/Shotguns%20and%20RIfles/500_and_590.jpg

"Old school" tactical. ;)


where do you get your stocks from?? im looking for one exactly like those to refinish

[Hexx]

I'm hooked after this baby.

You call it a combat shotgun, I cal lit anger managment.

http://img.photobucket.com/albums/v452/Monclero/DSC01076.jpg

she is soooo sweet to me

[FAS1]

http://world.guns.ru/userfiles/images/shotgun/sh27/ber_1201p.jpg

My Beretta 1201FP is still doing a fine job.

[Cochese]

here is my home defense setup!

870 tactical magnum...bushmaster back-end adjustible stock, normal mag extension, blackhawk extra shell sling, blackhawk saddle, red/green dot 40mm site, then of course the Glock21 with the light on it.

http://i123.photobucket.com/albums/o283/matlock94gt/o%20my/2011-02-08231709.jpg

http://i123.photobucket.com/albums/o283/matlock94gt/o%20my/2011-02-08231622.jpg


Do you have a link to the stock/rail adapter? Bushmaster?? Can't find it anywhere.

[blaster_54738]

Do you have a link to the stock/rail adapter? Bushmaster?? Can't find it anywhere.

Mesa Tactical makes them

http://www.mesatactical.com/index.php?id=55

[Cochese]

Mesa Tactical makes them

http://www.mesatactical.com/index.php?id=55

I know, I have one. ;)

I appreciate the link either way. That doesn't look like a Mesa unit. There is zero gap between the receiver and the adapter, whereas the MT high tube adapter creates a visible gap with an 870.

Maybe I'm going nuts. :dunno:

[blaster_54738]

I know, I have one. ;)

I appreciate the link either way. That doesn't look like a Mesa unit. There is zero gap between the receiver and the adapter, whereas the MT high tube adapter creates a visible gap with an 870.

Maybe I'm going nuts. :dunno:

Ah yes I now see what you're talking about...no idea either

[Hexx]

here are some pics of Alyx: The Beast

http://img.photobucket.com/albums/v452/Monclero/DSC01258.jpg

http://img.photobucket.com/albums/v452/Monclero/DSC01255.jpg

http://img.photobucket.com/albums/v452/Monclero/DSC01257.jpg

http://img.photobucket.com/albums/v452/Monclero/DSC01267.jpg

http://img.photobucket.com/albums/v452/Monclero/DSC01270.jpg

http://img.photobucket.com/albums/v452/Monclero/DSC01271.jpg

[bigleaf]

Picked up a nice, used 870 Police a couple of months ago. But this post is about the Blackhawk! Knoxx Spec-Ops Stock, Generation II. Just placed my order (great deal, too) for the stock, forend and cheek piece/shell carrier. They'll ship straight from Blackhawk on Wednesday, August 31, the day they're released.

Improved recoil reduction, better grip, seven-position adjustment, three sling mount options included, and an actual LimbSaver pad. Here's a YouTube about it:

http://www.youtube.com/watch?v=eMtMHc5qNw8

I got the Mossy Oak Break-Up camo, 'cause if all goes as planned, I'll be shooting at a lot of geese and turkeys. And paper targets don't care what the plastic looks like, anyhow.

Here's the guy with the deal:

http://www.emergencyresponderproducts.com/blknspshstge.html

I'll post some pics when it arrives.

[DHSGMAN]

My photographic skills are nill, but here's my Mossberg 930 SPX. Mods include Nordic Comp bolt handle, light mount, shell follower, and upgraded spring. Safariland 2 shell holder. GG&G sling mount and standard AR sling(which works perfectly). Insight WX-150 is mounted to the Nordic clamp. Zero issues with this Gen 1 SPX, barrel was perfect from the factory. Only thing I will change is the LOP from 14.0 to 12.5-13.0. If you are on the fence I would jump off, I sold a Benelli M1 tactical and bought this. The M1 needs gorilla arms to hold when you have gear on. Just my opinion.


http://i190.photobucket.com/albums/z253/dhsgman/930009-1.jpg

http://i190.photobucket.com/albums/z253/dhsgman/930008.jpg

http://i190.photobucket.com/albums/z253/dhsgman/930010.jpg

[Jon G23]

My photographic skills are nill, but here's my Mossberg 930 SPX. Mods include Nordic Comp bolt handle, light mount, shell follower, and upgraded spring. Safariland 2 shell holder. GG&G sling mount and standard AR sling(which works perfectly). Insight WX-150 is mounted to the Nordic clamp. Zero issues with this Gen 1 SPX, barrel was perfect from the factory. Only thing I will change is the LOP from 14.0 to 12.5-13.0. If you are on the fence I would jump off, I sold a Benelli M1 tactical and bought this. The M1 needs gorilla arms to hold when you have gear on. Just my opinion.


http://i190.photobucket.com/albums/z253/dhsgman/930009-1.jpg

http://i190.photobucket.com/albums/z253/dhsgman/930008.jpg

http://i190.photobucket.com/albums/z253/dhsgman/930010.jpg

VERY good looking shotgun you got. If changing the LOP to 13" was a simple "stock change", i'd be all over one of these. Why they make a tactical shotgun so dang long is just beyond me. Mossberg, FNH, Benelli.... they all are way too long for tactical use. S T U P I D IMHO

[Brad737]

I have absolutely pathetic photography skills. But here's my Remington 870. It came stock with the door breech/ muzzle brake and assault stock. I tried to only add things that would make it a better weapon, no "fluff". I added the Tacstar shell holder, Wilson Combat +2 mag extension, XS Big Dot tritium sight, Elzetta light mount with 130-lumen Streamlight Polytac, and jumbo head safety switch. I'm still trying to decide if I want to have the barrel Magnaported. I'm about 75% in favor. As it stands, I LOVE it. BTW, I load it with Remington #1 buckshot.

http://i94.photobucket.com/albums/l111/bradspence/Remington870ExpressTactical-1.jpg

[PeaceKeeper]

Here is a short video of my missus firing my 870 sawn Wingmaster.

http://www.youtube.com/watch?v=cHqRbHuuajw

[mdfd]

Here is a short video of my missus firing my 870 sawn Wingmaster.

http://www.youtube.com/watch?v=cHqRbHuuajw

wow that looked painful for her.....:shocked:

[PeaceKeeper]

wow that looked painful for her.....:shocked:

It has some stout recoil, she likes shooting handguns more than the 12 gauge.

[dc2integra]

I have absolutely pathetic photography skills. But here's my Remington 870. It came stock with the door breech/ muzzle brake and assault stock. I tried to only add things that would make it a better weapon, no "fluff". I added the Tacstar shell holder, Wilson Combat +2 mag extension, XS Big Dot tritium sight, Elzetta light mount with 130-lumen Streamlight Polytac, and jumbo head safety switch. I'm still trying to decide if I want to have the barrel Magnaported. I'm about 75% in favor. As it stands, I LOVE it. BTW, I load it with Remington #1 buckshot.

http://i94.photobucket.com/albums/l111/bradspence/Remington870ExpressTactical-1.jpg
Very nice setup you got there.

[DougW]

H&K M1 Super90 and Benelli M1 Super90 Tactical:

http://i126.photobucket.com/albums/p118/MDWINK/100_2552.jpg

Love the Benelli's!

:supergrin:

[Brad737]

Thanks a bunch. The barrel is getting Magnaported as we speak. I can't wait to get it back and try it out. I think she'll be perfect when I get her back.



Very nice setup you got there.

[Cochese]

Do you have a link to the stock/rail adapter? Bushmaster?? Can't find it anywhere.

Ah yes I now see what you're talking about...no idea either

It's a Cavalry Arms unit!

http://www.brownells.com/.aspx/pid=19976/avs%7CMake_3=Mossberg/Product/

[RYNOCG201]

Crappy pic but this is mine. Rem 870 special purpose with 18.5 inch bead barrel. I have a police style walnut fore end on the way. I want to keep it very simple, classic looking, and functional. I love it so far!

http://tapatalk.com/mu/62e1fd29-7280-1be6.jpg


RYNOC

[modestglock26]

Got a beater 500A for dirt cheap a lil while back. Decided to make it beyond silly looking with a Warhammer rail and I threw on the ATI stock for now. Waiting for my MBUIS to arrive before deciding on a reflex for it.

http://img.photobucket.com/albums/v309/modestglock/guns/DSC_0029.jpg
http://img.photobucket.com/albums/v309/modestglock/guns/DSC_0033.jpg

I still need to take the side rails off but have been lazy.

[mjkeat]

whats the weight like on that?

[modestglock26]

whats the weight like on that?

Haven't had a chance to weigh it yet, but it's pretty....solid.

[mjkeat]

Haven't had a chance to weigh it yet, but it's pretty....solid.

As in heavy? :lol:

[modestglock26]

As in heavy? :lol:

Yeah I would still consider it a deadly weapon even when unloaded.

[M1A Shooter]

Got a beater 500A for dirt cheap a lil while back. Decided to make it beyond silly looking with a Warhammer rail and I threw on the ATI stock for now. Waiting for my MBUIS to arrive before deciding on a reflex for it.

http://img.photobucket.com/albums/v309/modestglock/guns/DSC_0029.jpg
http://img.photobucket.com/albums/v309/modestglock/guns/DSC_0033.jpg

I still need to take the side rails off but have been lazy.

add in a surefire railed forarm, a sidesaddle on the receiver and buttstock along with the bandoleer sling. should finish it off nicely.

and the mossberg road blocker brake

[modestglock26]

add in a surefire railed forarm, a sidesaddle on the receiver and buttstock along with the bandoleer sling. should finish it off nicely.

and the mossberg road blocker brake

You forgot the gym membership so I'll be fit enough to haul it around :)

I'm thinking the optics and mayhaps a light. After that, I'll require a Gatorade drip and small continuous bumps of coke so I'll have the energy to carry it.

[M1A Shooter]

yes but that bring in the visual scariness. no need to even let them hear you rack a round into the chamber :)

[UnjollyRoger]

My Norinco.
http://i1105.photobucket.com/albums/h347/PsihoKonj/092820101022.jpg
http://i1105.photobucket.com/albums/h347/PsihoKonj/092820101023.jpg
http://i1105.photobucket.com/albums/h347/PsihoKonj/092820101025.jpg
http://i1105.photobucket.com/albums/h347/PsihoKonj/092820101026.jpg

[modestglock26]

Just got back from the range with the warhammer'd out 500A....amazing!

Put Magpul sights on it but will be adding a reflex one of these days.

I am now convinced that it is my 'go to' HD gun. The PDX1's worked nice but the 00 buck pattern left me smiling.

Great feeling!

[Hexx]

I'm Scurred of that 500A.....I....I..think it wants to take my lunch money...

[modestglock26]

I'm Scurred of that 500A.....I....I..think it wants to take my lunch money...

Not only will it take your lunch money, it'll take your mom out for a nice steak dinner and then not call her back.

[Hexx]

NOoooOOOooOOOO!

[JTACdiddy17]

here is my new Rem. 870 tactical shotty.

Messa tactical piston stock
Magpul MOE buttstock
Surefire fore end.

let me know what you think!

[Bello]

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/311017_272083272813854_100000365501548_892189_1384886404_n.jpg
My finished Benelli M4

[B Coyote]

Nice looking Benelli.

bc

[AggiePhil]

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/311017_272083272813854_100000365501548_892189_1384886404_n.jpg
My finished Benelli M4

Gonna put anything on that Surefire M80 rail?

[Bello]

Gonna put anything on that Surefire M80 rail?


nope.. i liked the looks and wanted it to breathe a lil better while im shooting 3 gun..

[DrunkenParrot]

http://i917.photobucket.com/albums/ad15/brycebentley/IMAG0040-1.jpg
http://i917.photobucket.com/albums/ad15/brycebentley/IMAG0045-1.jpg

[DHSGMAN]

http://i917.photobucket.com/albums/ad15/brycebentley/IMAG0040-1.jpg
http://i917.photobucket.com/albums/ad15/brycebentley/IMAG0045-1.jpg

Screw what anyone says, that flash hider/meat tenderizer looks bad*****.

[DrunkenParrot]

Screw what anyone says, that flash hider/meat tenderizer looks bad*****.

Thank you sir!

Sent from my HERO200 using Tapatalk

[Angry Fist]

Had to get one. After a little bit of filing, its a go. :supergrin:


http://i809.photobucket.com/albums/zz13/MO_FUGGAZ/100_3811.jpg

[Scattergun1187]

Wilson Combat Remington Express Magnum SBS 12"

http://i655.photobucket.com/albums/uu278/4layercake/PICT0655.jpg?t=1318693222

[DrunkenParrot]

Mossberg 18.5" 590A1
http://i917.photobucket.com/albums/ad15/brycebentley/IMAG0096.jpg

[Hackett]

http://i50.photobucket.com/albums/f330/jcapicy/2011-11-10162254.jpg

Added a tacstar side saddle today. Range test on Saturday.

[Don H]

Remington 870. Rem. 13" youth stock cut to 12.5", police trigger group, steel extractor, 18.5" police barrel RS (IMP CYL), fedeal low recoil 00 buck.

http://oi44.tinypic.com/11lo8eo.jpg

[Hackett]

Aside from rem/mossy, it would appear, great minds carry similar loadouts!

I was looking at a 20" 7+1 870 today actually.

But i think income tax might be a new rifle....maybe.

[Gribble]

Early birthday present I got today........:supergrin:

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/Mossy_930_SPX_1.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/Mossy_930_SPX_2.jpg

[ArmoryDoc]

Remington 870 "Old School"

https://cache.nebula.phx3.secureserver.net/obj/QjQ0N0Q3MzA5MUM5NkVCRTNCMDc6ZGQwYWVlYTA1MmViY2M0ODNkMzRjNjFiOGRhNjk3NjY=?uid=aee539b6-e7fe-4f43-a1a8-7b9499f52a14

[Glockdude1]

Remington 870 "Old School"

https://cache.nebula.phx3.secureserver.net/obj/QjQ0N0Q3MzA5MUM5NkVCRTNCMDc6ZGQwYWVlYTA1MmViY2M0ODNkMzRjNjFiOGRhNjk3NjY=?uid=aee539b6-e7fe-4f43-a1a8-7b9499f52a14

:thumbsup:

[G19Tony]

Remington 870 "Old School"

https://cache.nebula.phx3.secureserver.net/obj/QjQ0N0Q3MzA5MUM5NkVCRTNCMDc6ZGQwYWVlYTA1MmViY2M0ODNkMzRjNjFiOGRhNjk3NjY=?uid=aee539b6-e7fe-4f43-a1a8-7b9499f52a14

That is the BEST looking shotgun. :cool:

My 870 tactical shows up this week, but now I want one like that too. :wavey:

[ArmoryDoc]

Thanks guys. ;)

[G19Tony]

New 870.

http://i20.photobucket.com/albums/b226/G19Tony/Fluffy%20Bunnies/DSC01442.jpg

[Hackett]

how do you like shooting that Knox stock? I've heard they can be evil on cheek bones.

[G19Tony]

how do you like shooting that Knox stock? I've heard they can be evil on cheek bones.

I think I like it. This is my first shotgun. I'm going to put the regular stock back on an go out again. It did slap my cheek some. I can still feel it a couple hours later. It could be my technique. :dunno:

[IBreakStuff]

Hey Doc is that a metal buttplate? That gun would be awesome with one of those old military bayonet lugged mag clamps.

[CrackerKen]

Here's my new, unmolested, natural, Mossberg 590A1, LE model (51411). I'm going to put a Limbsaver recoil pad, a sling, and a shell carrier cuff on the stock. That's all I plan to do to it.

http://i209.photobucket.com/albums/bb171/CrackerKen/DSCN0035.jpg

http://i209.photobucket.com/albums/bb171/CrackerKen/DSCN0019.jpg

http://i209.photobucket.com/albums/bb171/CrackerKen/DSCN0018.jpg

[felix1985]

What's up with the reduced LOP stocks? What does this accomplish?

[B Coyote]

It makes the gun fit properly when wearing heavy clothing, armor, or both.

bc

[thumbbreak]

What's up with the reduced LOP stocks? What does this accomplish?

If you shoot with body armor/plates on or if you shoot square to the target, ala "CQB" (I do both), it allows a more normal sight picture. With regular stocks, at least for me, it pushes the gun from a LOP of 14" to 15.5" which shoots like crap for me. That's my preference, and my opinion, plenty of folks like the standard stocks...

[Jer]

It makes the gun fit properly when wearing heavy clothing, armor, or both.

bc

Or if you're a thick chested MoFo like me! :supergrin:

I run my AR's almost fully collapsed and generally just one click out. I'm much more comfortable with a shorter stock.

[machman]

Or if you're a thick chested MoFo like me! :supergrin:

I run my AR's almost fully collapsed and generally just one click out. I'm much more comfortable with a shorter stock.

I run my AR two clicks out(12" LOP). I prefer a 13" LOP shotgun. I think it partly due to the fact that I am 5'7".

[B Coyote]

I run my AR two clicks out(12" LOP). I prefer a 13" LOP shotgun. I think it partly due to the fact that I am 5'7".

We're the same height...I have my stocks set up the same as yours for LOP.

bc

[NeverMore1701]

I'm 5'8" and I run my ARs 1 click out and cut my shotgun so it's a hair under 12" with a 1" Limbsaver pad. More comfortable both in and out of armor for me.

[Hour13]

Well, it's not Tac'ed out to the hilt, but I love it. Short, light, simple.

870 Expr Magnum, Hogue Tamer set, 18.5" barrel, ext. to 7+1.

In it's natural habitat...
http://i306.photobucket.com/albums/nn269/hour13/gun%20stuff/100_4313.jpg

[Glockdude1]

What's up with the reduced LOP stocks? What does this accomplish?

If your are wearing body armor, (L/E), it allows you to keep weapon "close" to your shoulder, as though you were not wearing armor.

For people with shorter arms, women, some men, it makes shooting the shotgun much easier.

:cool:

[felix1985]

Ok thanks. As a long armed guy who's not going to be wearing body armor anytime soon I don't think this applies to me.

[GenoTac Ind.]

Ok thanks. As a long armed guy who's not going to be wearing body armor anytime soon I don't think this applies to me.

Have you tried a shotgun with a shorter LOP? Lots of the long armed fellows I shoot with have liked the shorter LOP on my shotgun. Try it, it's just more comfortable to be able to tuck a shotgun closer to your body.


_____________________________
Outdoor Hub mobile via iPhone 4.

[ArmoryDoc]

A "shotty" ? Not laughing "with" you bro. Laughing "at" you. ;)

[Hour13]

^^ Hmm?

[Hour13]

A "shotty" ? Not laughing "with" you bro. Laughing "at" you. ;)

Just a guess, but if the "shotty" you're laughing at is mine... laugh away. :tongueout:

IMO, piling on lasers, rails, & the like do not make a useful, or "tactical" weapon. A gun that is modified to suit the specific needs of the user however, is useful.

My 870 has two purposes in life. HD, and it rides along with me when I'm going out to buy vintage cars, which usually leads me into the boonies, or into the rougher parts of town.

In my house, I have very narrow hallways, that cut sharply off to the bedrooms, living room. I can maneuver, and get on target, much easier with this gun, than one with a stock or full length barrel.

On car hunts, the gun is in my car, which is a Mustang. If I need the gun, I need it quick, fast, & in a hurry. Ever try to rush a full size shotgun out of a Mustang?

So while I am aware of the stigma attached to owning a "shotty"... I set this gun up to suit my needs, and it does just that. I didn't do it because it "looks cool". Because I honestly think it looks stupid, lol.

But it's perfect for what I want it for.

[ArmoryDoc]

LOL at g30another600R's edit comment ! Just kidding ya anyways. Had ta poke some fun. ;)

[GenoTac Ind.]

LOL at g30another600R's edit comment ! Just kidding ya anyways. Had ta poke some fun. ;)

Lol! All in good fun brother.


_____________________________
Outdoor Hub mobile via iPhone 4.

[Angry Fist]

I love my shotty.

[Jack Black]

Ok thanks. As a long armed guy who's not going to be wearing body armor anytime soon I don't think this applies to me.

The Hogue 12" LOP stock is the best thing I put on my Mossy. I was actually thinking of selling it when I shot it with the regular 14" stock. But the shorter stock makes it so much more maneuverable and comfortable. I can shoot it with more of a squared up, solid stance, instead of a bladed stance, so recoil actually feels much less. I don't wear body armor and probably have pretty average size arms at 5'9".

[tactical556]

This is my primary HD shotgun. An 870 build that I just kept modifying until I liked everything about it:

870 reciever
Mesa Tactical Hi tube mount
Hydraulic buffer tube (mil spec)
Magpul CTR stock
Magpul MIAD grip
Mesa Tactical 4 shot side saddle
Mapgpul sling attachment
Vang Comp Barrel (highly recommended)
Gen 1 Surefire fore-end that I stippled for a better grip. Looked and tried the new ones but I thought they were too slippery when wet, muddy, et (I do a lot of outdoor training with this gun.

Only 3 things left to do:

Cerakote all the metal
Upgrade the lamp assembly to the LED unit on the Surefire
Get a permanent optic for it. Likely the Aimpoint CompM3.

[Quigley]

Only 3 things left to do:

Cerakote all the metal
Upgrade the lamp assembly to the LED unit on the Surefire
Get a permanent optic for it. Likely the Aimpoint CompM3.

How about get a magazine tube extension?

[Bluestreakfl]

http://img.tapatalk.com/467e1004-2d25-6f0e.jpghttp://img.tapatalk.com/467e1004-2d3b-26d1.jpghttp://img.tapatalk.com/467e1004-2d54-70ef.jpghttp://img.tapatalk.com/467e1004-2d6c-6f1b.jpg

My Mossberg 500A, 18.5" barrel, heatshield, telescoping stock, and truglo red-green dot reticle sight.


OutdoorHub Mobile, the information engine of the outdoors.

[tactical556]

I'd like a mag extension...but that gun is plenty heavy already up front and one-armed manipulation is a chore. And for the record, I am not exactly weak. So I dont want any more weight there.

And besides if you are in a HD situation and need more than a normal tube will hold...you're bigger concern should be calling in an airstrike. ;)

[tenntornado]

Zinc park,stock cut to 12.75"LOP and recoil pad reground.Thats about it other than a Big Dot bead and Wilson safety, spring,and follower..:whistling:
http://i200.photobucket.com/albums/aa212/mfleishman/008-1.jpg

[B Coyote]

That's very nice.

bc

[tenntornado]

That's very nice.

bc

Thanks,Heres another one I have taken a shine to lately.:cool:
http://i200.photobucket.com/albums/aa212/mfleishman/0042.jpg

[David_Ely]

Zinc park,stock cut to 12.75"LOP and recoil pad reground.Thats about it other than a Big Dot bead and Wilson safety, spring,and follower..:whistling:
http://i200.photobucket.com/albums/aa212/mfleishman/008-1.jpg

That is nice looking!

[yukon2004]

Just picked this up last week... third one I've bought... hopefully I will keep this one... :P

http://i1095.photobucket.com/albums/i471/brandonsfinley/Yukon%20Forum%20Pics/PhotoJan1871834PM.jpg

870 7-Shot, Hogue Grips, 00BK ammo

[CDR_Glock]

http://img.tapatalk.com/18fe9fbd-4678-d0ca.jpg

This is My latest. Saiga 12 Tactical.

I'm also getting an FN 12 gauge tactical pump in the same shipment.

Mossberg 930SPX

http://img.tapatalk.com/18fe9fbd-4699-a1e2.jpg




iPad/Tapatalk

[Roneye]

Here is one of my Favorites, Remington 870 Express 12 ga 7 shot, Scattergun technology ghost ring sights, remington police walnut stock and forend, wolf magazine spring, wilson combat flourescent green folower, heavier sear spring, heavier carrier dog spring and a machined steel extractor.
http://www.boomboomtactical.com/gbroker/870_06.jpg click on image for larger view

[cooden]

Mossberg 930SPX with some goodies.

Nordic Charging Handle
Nordic Barrel Clamp with Rail
Mesa Tactical 6-shell Holder
GG&G Sling Mounts (Front & Rear)
ETA Safety
ETA Hi-Viz Follower


http://img.photobucket.com/albums/v730/johnnyz71/Mossberg%20930SPX/IMG_1404.jpg
http://img.photobucket.com/albums/v730/johnnyz71/Mossberg%20930SPX/IMG_1399.jpg

[NeverMore1701]

Mossberg 930SPX with some goodies.

Nordic Charging Handle
Nordic Barrel Clamp with Rail
Mesa Tactical 6-shell Holder
GG&G Sling Mounts (Front & Rear)
ETA Safety
ETA Hi-Viz Follower


http://img.photobucket.com/albums/v730/johnnyz71/Mossberg%20930SPX/IMG_1404.jpg
http://img.photobucket.com/albums/v730/johnnyz71/Mossberg%20930SPX/IMG_1399.jpg


That is a very nice looking shotgun!

[T0tal R3kall]

Heres my mossberg 500. I got a really good deal on this gun that I couldn't pass up.
Plus I seem to have a thing for desert camo here lately.

Accessories will come soon, I just have to decide which way i wanna go with it.

[arj]

My newest project--Charles Daly field 12 gauge with Nordic Components 6+ extended mag tube. 11 +1 in an autoloader. I. AM. HAPPY.
http://i166.photobucket.com/albums/u91/andy4uall/021312151031.jpg

[illmac77]

http://img.photobucket.com/albums/v328/illmac77/ce3332b7.jpg

Glock 19 an 26

[Spats McGee]

Here is one of my Favorites, Remington 870 Express 12 ga 7 shot, Scattergun technology ghost ring sights, remington police walnut stock and forend, wolf magazine spring, wilson combat flourescent green folower, heavier sear spring, heavier carrier dog spring and a machined steel extractor.

http://www.boomboomtactical.com/gbroker/870_06.jpg
click on image for larger view

That is one really, really nice-looking setup!

[Roneye]

Thanks it is one of my favorites very reliable and it looks great too...

[AggiePhil]

Benelli M4
Carriercomp Ti Mag Tube
Carriercomp Replacement Top Rail
Aimpoint Micro T-1 w/LaRue LT661 QD Mount
GG&G Oversized Bolt Release
Dave's Metal Works (DMW) Oversized Safety
Mesa Tactical Urbino Stock w/Cheek Riser, Benelli OEM Pistol Grip Cover, Limbsaver Pad, & QD Sling Attachment
Original SOE Bungee Sling
Surefire M80 Railed Handguard w/LaRue Index Clips (UDE)
3GunGear Velcro Side Saddle

White light and Sidearmor 2-Shell Carrier to follow...

http://farm8.staticflickr.com/7205/6854507439_648d65e431_b.jpg

[Inebriated]

Thought I had a good pic, realized I didn't... I'll have to take one later.

For now, this is she. Mesa Tactical 6-shot side saddle, Mesa Tactical Urbino stock, and a GG&G sling mount in the front for when it leaves the house. Simple, looks good, and reliable. The ammo laying around looking lame is because I unloaded it... not a poor attempt at art lol. Federal LE13200, and three Brenneke HD Slugs, if anyone cares.

http://i207.photobucket.com/albums/bb201/Name890/870Mesa.jpg

[jb1911]

Just picked this up last week... third one I've bought... hopefully I will keep this one... :P

http://i1095.photobucket.com/albums/i471/brandonsfinley/Yukon%20Forum%20Pics/PhotoJan1871834PM.jpg

870 7-Shot, Hogue Grips, 00BK ammo

Shoot me a PM if you want to sell it. That's exactly what I'm looking for.

[JFrame]

No Mariner love?

This is my Mossberg 500 Mariner 18.5" with Blackhawk Knoxx recoil reducing stock.

http://i306.photobucket.com/albums/nn279/junkmailfabo/IMG_1364.jpg



Heck -- I'll not only match your Mariner-love -- I'll see your SpecOps stock also... http://www.kolobok.us/smiles/standart/good3.gif

http://i737.photobucket.com/albums/xx12/Dennva/MossMarine02sm.jpg


.

[BLau]

Benelli M4 - 922(r) compliant.

http://i1265.photobucket.com/albums/jj516/BLau1976/2012-02-28_12-49-32_376.jpg

[jb1911]

Does anyone make a mag extension for a 20 ga 870?

[Spats McGee]

I think Choate does. www.riflestock.com

[yukon2004]

Shoot me a PM if you want to sell it. That's exactly what I'm looking for.

Haha! I'm planning on keeping her!

[Angry Fist]

New pics of mine:


http://i809.photobucket.com/albums/zz13/MO_FUGGAZ/100_3823.jpg


http://i809.photobucket.com/albums/zz13/MO_FUGGAZ/100_3822.jpg

[geofri]

Meh... too long, AF. :tongueout:

[faawrenchbndr]

That looks,.....well, Angry! Very nice!

[Cole125]

Finished my tactical shotgun build today. Its got the Blackhawk stock, Tac Star side saddle, and a Trijicon reflex 6.5 MOA red dot.

http://i298.photobucket.com/albums/mm245/jcole_08/mossberg500.jpg

[Angry Fist]

Meh... too long, AF. :tongueout:The 19" barrel, or the mags? I was surprised at how well the vertical grip worked, as I never used one before. Almost willing to go stock-less. Shoots damn good folded up, and a folder is an issue with anything more than one stick mag, without one of them fancy folding mechanisms designed for drums.:whistling:


That looks,.....well, Angry! Very nice!
Thanks, bud! No one noticed the homemade shell stop :miff:
I used a 1" scope ring, a wooden dowel cut at an angle, and a screwed in rubber bumper. It can easily be adjusted to accomodate 3" shells. Recoil can cause shells to fly out of the secondary, so I was told.

[JFrame]

Finished my tactical shotgun build today. Its got the Blackhawk stock, Tac Star side saddle, and a Trijicon reflex 6.5 MOA red dot.

http://i298.photobucket.com/albums/mm245/jcole_08/mossberg500.jpg

I like that heat shield -- kind'a gives it that WWI trench gun feel... :cool:


.

[Tvov]

No one noticed the homemade shell stop :miff:
I used a 1" scope ring, a wooden dowel cut at an angle, and a screwed in rubber bumper. It can easily be adjusted to accomodate 3" shells. Recoil can cause shells to fly out of the secondary, so I was told.

Can you get a better picture of what you did? Lotta black on that gun... lol

[Angry Fist]

Can you get a better picture of what you did? Lotta black on that gun... lol
After a bit, I will. The reason I did it, was the mag coupler and double baseplate came as a kit from Arredondo, and also came with a metal shell stop. The reciever has to be drilled and tapped for it, and I'm not willing to do that. I also like shooting magnum shells, and the Arredondo shell stop is not adjustable. Either do without magnums, or mount it farther forward, and potentially deal with the top shell coming loose.

[jb1911]

I just got this 20 ga. Remington from my LGS for $335. I'm thinking of leaving it stock, but the Knoxx Specops is tempting me.

http://farm8.staticflickr.com/7051/6801562488_ff506a6c4c_b.jpg

[chr_edw]

My 590A1 in 18.5" with added s&j extension to give me 7+1. Yep a +2 tube that does not extend past the barrel.

http://i1129.photobucket.com/albums/m511/martialartdeals/P1130440.jpg

[CrackerKen]

^^ Where did you get the extension at? What brand? I have a M590A1 just like yours, and an extension might be handy someday.

[chr_edw]

^^ Where did you get the extension at? What brand? I have a M590A1 just like yours, and an extension might be handy someday.


From S&J out of Canada. They are a little pricy but no one else makes a +2 that fits flush. + it is parkerized and matches the A1 great.

Here is a link http://sjhardware.com/store/modules.php?name=catalog&file=product_info&cPath=107_120&products_id=342
(http://sjhardware.com/store/modules.php?name=catalog&file=product_info&cPath=107_120&products_id=342)

[NeverMore1701]

My 14 year old brother shooting a shotgun for the first time:

http://2.bp.blogspot.com/-jXqkIn1tNk4/TulxG_pOTJI/AAAAAAAADTE/KMTXMk5uxZI/s1600/IMG_2069.JPG

[Ozarak]

You can get a +1 extension from Choate. If you use the factory follower it is actually a +2. It will be even with the end of the barrel.

It comes with the extension, spring, an orange follower and a clamp/sling swivel.

[JTR]

Little 870 Super Mag...

http://img.photobucket.com/albums/1103/Monster11/shotgun/D102.jpg

...if that isn't good enough for the zombies, the sawed-off 10ga might do.

http://img.photobucket.com/albums/1103/Monster11/shotgun/0109121406.jpg
its still out getting a little bit-o-work done at this point.

Not enough Ithacas in the thread!

http://img.photobucket.com/albums/1103/Monster11/shotgun/640DSC02174.jpg

[Nalapombu]

LOVE the Ithacas

Nalajr

[geofri]

From S&J out of Canada. They are a little pricy but no one else makes a +2 that fits flush. + it is parkerized and matches the A1 great.

Here is a link http://sjhardware.com/store/modules.php?name=catalog&file=product_info&cPath=107_120&products_id=342
(http://sjhardware.com/store/modules.php?name=catalog&file=product_info&cPath=107_120&products_id=342)


Ugh! I want that, but for an extra Benjamin, I could cut off 2" of barrel instead..

[KS Trekker]

https://lh3.googleusercontent.com/-nzedR_kl1z4/T3Uzg7zev7I/AAAAAAABnCo/n6_BLNqnV2s/s800/Zombie_Ready.jpg

https://lh3.googleusercontent.com/-pmXaXtASRtY/T3UzCcl0_aI/AAAAAAABnB8/6bORmZCv-_U/s800/DSC_2835_edited.JPG

[jb1911]

You know what's really hard to take a good picture of? A black shotgun. I put a light and a shell carrier on my 870, but I'm not really happy with it. I'm thinking of going back to stock. Anyway, here's some pix:

http://farm7.staticflickr.com/6215/7029103217_fd033b81ea_c.jpg

http://farm8.staticflickr.com/7243/7029103491_353a4d2922_z.jpg

[Wolf Spyder]

Here is mine;

Mossberg 835 Ultra-Mag Crown Grade
w/ 3 1/2" Chamber.
w/ Parkerized finish.

Later modifications;
18" Model 590 Accu-choke barrel which has been bored to accept 3 1/2" shells.
Custom milled receiver end block to accept an AR15 pistol grip and adjustable stock.


I built this before Tactical Shotguns were a big thing. Even before Wilson Combat bought out Scattergun Technologies.

http://img.photobucket.com/albums/v378/Wolf_Spyder/Mossberg835Custom.jpg

Then I spray painted it...
http://img.photobucket.com/albums/v378/Wolf_Spyder/_mg_0730croppedsmall.jpg

Now it has become a local custom to test your manhood... can you shoot a 3 1/2 inch Super Mag shell from a pistol gripped shotgun?
http://img.photobucket.com/albums/v378/Wolf_Spyder/2011-06-19MB5Q2895.jpg

Are you brave / foolish enough to try?

At the end of the day this Mossberg 835/590 Hybrid will shoot any 12Ga. shell from 1 1/2" all the way out to a 3 1/2" Super Mags. Right now it has a M1913 Rail mounted on the top with a Red Dot sighted for 2 3/4" Slugs @ about 50 yards. This set-up is great for 00-Buck at close range.

[Angry Fist]

Very cool, Wolf Spyder. Not too many 3-1/2" guns out there. I wonder if it will feed tiny little flashbangs? They're only an inch tall.

[Nalapombu]

Good looking Mossy there. I wouldn't mind having one like it.

Doesn't the Benelli Nova and SuperNova handle 3 1/2 inch shells too?

Those are really nice too.

Nalajr

[M1A Shooter]

i have a mossberg 535 with the 3.5" chamber. its not too tactical though, just a turkey version.

[Wolf Spyder]

M1A Shooter, That is my problem with Mossberg. The 835 is a Turkey gun, and they do not want to blur that line. Mossberg told me It was not possible to mount the 590 barrel to the 835 receiver. After years of dealing with Mossberg regarding this shotgun, I'm fed up. Their customer service is full of brainless script readers. They hire folks who have no idea what Mossberg sells or doesn't sell. Mossberg lists stuff in their catalog that they don't sell separately from a complete shotgun. It is aggravating.

From here on out I will be purchasing Remington 870's.

[jb1911]

Another shot

http://farm8.staticflickr.com/7077/6896722528_ff66dab167_b.jpg

[M1A Shooter]

i still prefer the controls of the mossberg but i do see the 3.5" as unnecessary, for me at least. i will stick with the 500 or 590 serries. i was told when i got the 535 that the barrels were interchangable with the 500 but thats not true.

[JTR]

Not real "tactical" more of an "anti-zombie" thing... the sawed-off 10ga BPS... kinda looks like a mini sewer pipe on there.

http://img.photobucket.com/albums/1103/Monster11/shotgun/DSC02568.jpg

[Glockdude1]

Not real "tactical" more of an "anti-zombie" thing... the sawed-off 10ga BPS... kinda looks like a mini sewer pipe on there.

http://img.photobucket.com/albums/1103/Monster11/shotgun/DSC02568.jpg

:wow:

[Angry Fist]

Not real "tactical" more of an "anti-zombie" thing... the sawed-off 10ga BPS... kinda looks like a mini sewer pipe on there.

http://img.photobucket.com/albums/1103/Monster11/shotgun/DSC02568.jpg
:drool:

[Wolf Spyder]

Anti-Zombie... and you pick a 10Ga. I'm thinking a 20Ga. is the perfect Anti-Zombie weapon. Lighter recoil with great stopping power up close.

[NeverMore1701]

Anti-Zombie... and you pick a 10Ga. I'm thinking a 20Ga. is the perfect Anti-Zombie weapon. Lighter recoil with great stopping power up close.





For zombies, I'd rather a small carbine, 9mm or 5.56mm, preferably suppressed. For zombie trucks, that 10ga would do nicely :tongueout:

[Milhouse58421]

http://img208.imageshack.us/img208/4627/1237605959004.jpg (http://img208.imageshack.us/my.php?image=1237605959004.jpg)


I know, it's probably an old post, but that is one of the funniest things I've seen in a long, long time. You owe me for a new keyboard, I spit Mtn. Dew all over mine when I saw this......:rofl::rofl::rofl:

[AC45ACP]

What is it? Any Idea's????

http://i843.photobucket.com/albums/zz355/ac45acp/guns/Spas12apart.jpg






































It's a UN-Fired SPAS 12 (29years old) I have to replace the Receiver Bushing so It will remain Un Fired until my parts come in..

Well Here's the A-Team..

http://i843.photobucket.com/albums/zz355/ac45acp/guns/spassbr1911.jpg

[BEER]

i've always wondered, what is the hook for on the stock?

[AC45ACP]

i've always wondered, what is the hook for on the stock?

Well it can move 90 degrees left or Right and it hooks under your forearm, adding leverage, allowing you to shot it with one hand..or you could use it as a carry handle.

[FriscoCHL]

I admire your choice in beverage sir. Nice shot gun and the A team looks great!!! Why has it not been fired in 29 years?!

[dakrat]

cellphone shot of my persuader

http://i923.photobucket.com/albums/ad77/2Baers/500-1.jpg?t=1329525644

[Angry Fist]

I admire your choice in beverage sir. Nice shot gun and the A team looks great!!! Why has it not been fired in 29 years?!
Investment. Those things are expensive now!

[westford86]

What is it? Any Idea's????

http://i843.photobucket.com/albums/zz355/ac45acp/guns/Spas12apart.jpg

It's a UN-Fired SPAS 12 (29years old) I have to replace the Receiver Bushing so It will remain Un Fired until my parts come in..

Well Here's the A-Team..

http://i843.photobucket.com/albums/zz355/ac45acp/guns/spassbr1911.jpg


I just got a SPAS myself, and I'm looking for some parts to get it back up to speed. Where are you sourcing parts from?

http://www.westford86.com/AR15/SPAS/_MG_2625_1.jpg
http://www.westford86.com/AR15/SPAS/_MG_2628_web.jpg

[M1A Shooter]

http://i220.photobucket.com/albums/dd68/Broylz/Mobile%20Uploads/IMAG0314.jpg

my mossberg 535 3.5" turkey gun with a shockwave raptor grip installed. the regular stock will go back on it when i get another mossberg 500 to go sbs/aow with.

[AC45ACP]

I just got a SPAS myself, and I'm looking for some parts to get it back up to speed. Where are you sourcing parts from?

http://www.westford86.com/AR15/SPAS/_MG_2625_1.jpg
http://www.westford86.com/AR15/SPAS/_MG_2628_web.jpg


Well basically all the rubber parts need to be replaced
Like the receiver bushing and the bumper pad on the folding
Stock and rubber bumper in the folding stock..

I ordered them on the 3rd and haven't heard or gotten a return email So yesterday I went down to a local machine shop and are having them made out of modern material
That will last years.
The stock parts were made out of a nylon molded material
That become brittle over the years.

I plan on having a few dozen parts made and
Will sell them since there is only one guy selling parts.

[AC45ACP]

I admire your choice in beverage sir. Nice shot gun and the A team looks great!!! Why has it not been fired in 29 years?!

Thanks, I love SHINER!!! Oh! and the SBR and the Ed Brown are OK also!

And the reason it went unfired the Original owner had 3 Spas... One he shot a lot(the HeLL out of it) and Sold for what he paid for all 3 Back in the Eighties..
Then he Sold me Mine and is Keeping the Last NIB for himself..

Mine came without a box..

[skud_dusty]

Finally got off my arse to take a good pic of my M11

http://i.imgur.com/dw570.jpg

[Veedubklown]

Finally got off my arse to take a good pic of my M11

http://i.imgur.com/dw570.jpg

Yeah, this thread needs more hump-backs.

[chr_edw]

Finally got off my arse to take a good pic of my M11

http://i.imgur.com/dw570.jpg

That is one classy tactical Shotty.

[Dalton Wayne]

http://i647.photobucket.com/albums/uu192/Daltonlwayne/DSCN0036.jpg

[jb1911]

Ready for the Zombies!

http://farm8.staticflickr.com/7137/6961786916_d4ae946578_o.jpg

[GoBigOrange]

Here is my Remington 870 TALO special edition. I have a Streamlight Stylus Pro held in place with the Elzetta mount.

Also included is my Winchester Defender 1300. The Winchester is my favorite.

http://i854.photobucket.com/albums/ab105/emathew3/IMG_20120331_181014.jpg?t=1333231837

http://i854.photobucket.com/albums/ab105/emathew3/IMG_20120421_225950.jpg?t=1335063606

http://i854.photobucket.com/albums/ab105/emathew3/IMG_20120421_230007.jpg?t=1335063625

[NeverMore1701]

Here is my Remington 870 TALO special edition. I have a Streamlight Stylus Pro held in place with the Elzetta mount.

Also included is my Winchester Defender 1300. The Winchester is my favorite.

http://i854.photobucket.com/albums/ab105/emathew3/IMG_20120331_181014.jpg?t=1333231837

http://i854.photobucket.com/albums/ab105/emathew3/IMG_20120421_225950.jpg?t=1335063606

http://i854.photobucket.com/albums/ab105/emathew3/IMG_20120421_230007.jpg?t=1335063625

Love me a nice Winchester shotgun!

[JTR]

Yeah, this thread needs more hump-backs.
Yes. Yes it does.

1923 vintage Remington Model 11 - reminds me of the Steve Earle song Devil's Right Hand "...shoot as fast as lightning but loads mighty slow"
http://i1126.photobucket.com/albums/l610/11-48/Remington%20Model%2011/0402121651.jpg

[05DodgeDakota]

Here is mine. Bought used for $280. Remington 870 express magnum 12 gauge 18.5 barrel. Cut forend down to accept the shell carrier that a friend gave me.


Outdoor Hub mobile, the outdoor information engine

[JTR]

Need more Ithaca p0rn too!

VERY late 1941 Model 37 (in the last 200 M37s built that year)
http://i1242.photobucket.com/albums/gg521/IthacaM37/1941%20M37/0417121451640.jpg

[dodgecope89]

Don't currently have one but I've been thinking about getting one soon so I'm tagged for ideas and looking at the cool pics.


Sent from my IGlock 4s

[JTR]

...and the "after" pics. It was an inexpensive little impulse buy, but is in great shape and someone had already shortened the barrel a bit to add the dial-o-duck, so a no brainer and no harm in sending it to be made proper Riot Gun length. There is a bit of surface rust here and there, but not much for a 69-year old field gun. Took the wood off and there is no cracking, splitting or chipping at all (big deal on old Ithacas). I'll get it all apart in soon and get to clean all the crud out of it. Thing is in great shape and an absolute blast to shoot; really surprised more people aren't picking these things up for fun guns - they're very robust, plentiful and inexpensive.

http://i1242.photobucket.com/albums/gg521/IthacaM37/1941%20M37/DSC02.jpg

http://i1242.photobucket.com/albums/gg521/IthacaM37/1941%20M37/DSC01.jpg

http://i1242.photobucket.com/albums/gg521/IthacaM37/1941%20M37/DSC03.jpg

Someone else had stamped it CYL some years ago - not a factory Ithaca stamp.
http://i1242.photobucket.com/albums/gg521/IthacaM37/1941%20M37/DSC04.jpg

[Inebriated]

http://i207.photobucket.com/albums/bb201/Name890/IMGP50d31.jpg

[MindBeyondAverage]

There are some awesome shotguns posted on this forum. Here are my two shotguns with their siblings.

http://i1105.photobucket.com/albums/h354/mindbeyondaverage/IMG_1287.jpg

[chr_edw]

Looks like you have all of your bases covered.

There are some awesome shotguns posted on this forum. Here are my two shotguns with their siblings.

http://i1105.photobucket.com/albums/h354/mindbeyondaverage/IMG_1287.jpg

[Dalton Wayne]

http://i647.photobucket.com/albums/uu192/Daltonlwayne/DSCN00401.jpg

[CrackerKen]

Here's my Mossberg 590A1, 18.5" barrel. This isn't very tacticool, but I like it this way. :cool:

http://i209.photobucket.com/albums/bb171/CrackerKen/DSCN0108.jpg

Great shotgun.

If that doesn't work, I resort to my backup, Mossberg 185KA 20 ga, circa 1954.

http://i209.photobucket.com/albums/bb171/CrackerKen/DSCN0049.jpg

That ain't tacticool at all, but it still shoots.

[MindBeyondAverage]

Looks like you have all of your bases covered.

There are some awesome shotguns posted on this forum. Here are my two shotguns with their siblings.

http://i1105.photobucket.com/albums/h354/mindbeyondaverage/IMG_1287.jpg

Hey thanks. I believe I do, but of coarse, I still have more work to do. I've put a lot of thought into what's in this picture and the purpose of each tool. I feel like a Remington 700 is a necessary addition, just haven't decided. I also have bows and arrows that I am better at using than these, to preserve ammo in a time like SHTF or something els. Thanks for commenting.

[Tvov]

If that doesn't work, I resort to my backup, Mossberg 185KA 20 ga, circa 1954.

That ain't tacticool at all, but it still shoots.

Ooooohhh, that is cool looking. That is a bolt action shotgun, correct?

[CrackerKen]

Tvov - Yes, that's a bolt action. It holds a 2 shot magazine, plus 1 in the chamber. It also has a C-Lect Choke. Nice old shotgun. My dad got it for HD back when I was a small child, or toddler, maybe about 1954-55, due to prowlers in the neighborhood. I refinished the stock (formerly oiled wood) with TrueOil, and had the metal parts bright and black chromed. I used it to hunt bird and rabbits when I was a teenager, but it hasn't seen much use in at least 40-41 years.

[Veedubklown]

http://i209.photobucket.com/albums/bb171/CrackerKen/DSCN0049.jpg


I've shot one like this in .410, but it didn't like to feed all that well. Every now and then you'd get rim-lock, or it just wouldn't pop out of the magazine right. Gun was beat up though. Neat concept.

[Taroman]

Picked this one up at the LGS as I didn't have a shotgun in the house.
Might come in handy, given future uncertainty.
This came with a Knoxx(?) M4 type stock.
I actually prefer a regular stock on a shotgun, however.
Ordered up a Speedfeed sport style that's now out for a camo dip.
http://www.hverovhe.com/870.jpg

[DrunkenParrot]

Two of the finest things, Makers and Mossberg!
http://i.minus.com/j1CSBih3owNDc.jpg

[chr_edw]

Two of the finest things, Makers and Mossberg!
http://i.minus.com/j1CSBih3owNDc.jpg

What elastic side saddle is that? Does it velcro on/off? How do you like it?

[cowboywannabe]

If that doesn't work, I resort to my backup, Mossberg 185KA 20 ga, circa 1954.

http://i209.photobucket.com/albums/bb171/CrackerKen/DSCN0049.jpg

That ain't tacticool at all, but it still shoots.

i have the Westernfield version "mossberg", bolt 20ga. poly choke. great gun......

[jb1911]

http://farm8.staticflickr.com/7078/7297330510_1457125fd5_h.jpg

[DrunkenParrot]

What elastic side saddle is that? Does it velcro on/off? How do you like it?

It's SKD ESSTAC saddle, it does Velcro on and off. I love it, I replaced my Mesa tactical with it, I couldn't be happier!
Pic thread.
http://i.minus.com/jbg2WAbO8mkcXt.jpg

[NeverMore1701]

In case of a tactical dove attack:

http://3.bp.blogspot.com/-yKIaqdxQnQE/T77wo2NwTBI/AAAAAAAAAh0/Sy4dtVsfOls/s1600/IMG_5886.JPG

[chr_edw]

It's SKD ESSTAC saddle, it does Velcro on and off. I love it, I replaced my Mesa tactical with it, I couldn't be happier!
Pic thread.
http://i.minus.com/jbg2WAbO8mkcXt.jpg

I was looking at them a while back on SKD but looks like they are out now. I shouldn't have waited.

****Edit*** They are in stock again, ordering now***

[Glockdude1]

In case of a tactical dove attack:

http://3.bp.blogspot.com/-yKIaqdxQnQE/T77wo2NwTBI/AAAAAAAAAh0/Sy4dtVsfOls/s1600/IMG_5886.JPG

Looks like a Browning Superposed. Nice.

:supergrin:

[NeverMore1701]

Looks like a Browning Superposed. Nice.

:supergrin:

Invector Plus Citori Special Steel in 20ga.

[srt-4_jon]

http://i765.photobucket.com/albums/xx292/srt-4_jon/DSC_3924.jpg

[chr_edw]

Updated picture with new elastic shotshell carrier from skd. Thanks for the recommendation. Love it so far. Hopefully can go out and run some drills with it this week.

http://i1129.photobucket.com/albums/m511/martialartdeals/Untitled-3.jpg

[OMEGA5]

How about this one.
Dano :harley:

http://i5.photobucket.com/albums/y200/omega5m14/P6060004.jpg

[Inebriated]

Don't mind the thing going around the stock... it's a guitar wall hanger.
http://i207.photobucket.com/albums/bb201/Name890/870mag1.jpg
http://i207.photobucket.com/albums/bb201/Name890/870mag.jpg

[Angry Fist]

How about this one.
Dano :harley:

http://i5.photobucket.com/albums/y200/omega5m14/P6060004.jpg
Circut Judge?

[NeverMore1701]

Circut Judge?

I want S&W or Ruger to make one in .500 mag.

[Angry Fist]

I want S&W or Ruger to make one in .500 mag.
That would be badass. :rock:

[OMEGA5]

Circut Judge?

Yep. I like this gun. Funny thing; 2.5
inch PDX didn't shoot for crap but the 3 inch 4 disk PDX
shoots great.
Dano :harley:

[AggiePhil]

Don't mind the thing going around the stock... it's a guitar wall hanger.
http://i207.photobucket.com/albums/bb201/Name890/870mag1.jpg
http://i207.photobucket.com/albums/bb201/Name890/870mag.jpg

Looks nice! I like the guitar hanger idea.

I still don't understand why people use AFGs like that though. They are designed to assist with an aggressive forearm-forward, thumb around the top of the handguard grip. Don't really see how that's possible with a shotgun and even if it is, putting your thumb on top of the barrel would be a BAD idea during firing.

[Inebriated]

Looks nice! I like the guitar hanger idea.

I still don't understand why people use AFGs like that though. They are designed to assist with an aggressive forearm-forward, thumb around the top of the handguard grip. Don't really see how that's possible with a shotgun and even if it is, putting your thumb on top of the barrel would be a BAD idea during firing.
Thanks, I sold a guitar, and had a hanger left, so it only seemed right to use it for the HD gun .

The AFG is just there to experiment with... I had it laying around with some AR parts, so I figured I'd see how it feels. So far, I don't like it much, but I figure I'll at least try it at the range first.

[chr_edw]

I've been wanting to try an afg also, but to many other projects. Good looking shot gun either way.

[n2wishn]

http://img.tapatalk.com/6306ac4d-1fe4-4f9e.jpg

20" and 18" 870s


Sent from my iPhone using Tapatalk

[Tvov]

What kind of stock is that on the 18"?

[n2wishn]

What kind of stock is that on the 18"?

The stock on the 18" is Knoxx (Blackhawk) recoil reduction stock.

Another 20" shot
http://img.tapatalk.com/6306ac4d-ca6b-2243.jpg


Sent from my iPhone using Tapatalk

[jb1911]

http://farm9.staticflickr.com/8168/7428392414_1b861585fc_h.jpg

[sidetracked]

http://i118.photobucket.com/albums/o114/stustephstark/16297796.jpg
My 870 Mag, with a trim. Ive got about $45 bucks in this home defense shotty.

[sidetracked]

http://i118.photobucket.com/albums/o114/stustephstark/0ceeef8f.jpg
My 1915 Springfiels SxS 12g.

[Coastal]

My KSG with Aimpoint Micro in a Yankee Hill riser.

http://i16.photobucket.com/albums/b17/Master-G/_MG_3658_2.jpg

http://i16.photobucket.com/albums/b17/Master-G/_MG_3651_2.jpg

http://i16.photobucket.com/albums/b17/Master-G/_MG_3655.jpg

[Tvov]

That'll just scare the zombies away. Looks like something out of a SciFi movie!

[Veedubklown]

My KSG with Aimpoint Micro in a Yankee Hill riser.
http://i16.photobucket.com/albums/b17/Master-G/_MG_3655.jpg

I'm in love :hearts:
:50cal:

[solconviction]

[QUOTE=JTR;18721449]Little 870 Super Mag...

http://img.photobucket.com/albums/1103/Monster11/shotgun/D102.jpg

I really like your 870! Any more pics?




Outdoor Hub mobile, the outdoor information engine

[Artacticool]

Picked up my new shotgun today and it fires just the way it looks MEAN! I'll lost pics shortly!

[MeanAction]

Don't care much for the word 'tactical', I call them fightin' shotguns....

http://img411.imageshack.us/img411/7004/php4d3m9epmjn9.jpg
http://img84.imageshack.us/img84/9193/dscn0666ci6.jpg
Care if I use that term, "Fighting Shotguns?"

[MeanAction]

If you want to dress it up that is one thing. But don't buy into this tactical looking fad. You have a fine, tactical, get-er done shotgun just the way she is. IMO Just sayin
You can't go wrong with a CDM Gear flashlight mount.
http://www.cdmgear.com/product.html

[majette]

started a thread about the build but here is a pic for the thread. old ithaca 37 made blactical!

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/563968_10151934447575221_1961981725_n.jpg

[Angry Fist]

http://i809.photobucket.com/albums/zz13/MO_FUGGAZ/Saiga4.jpg

[whitebread]

This 870 Express was my HD gun, but has now been relegated to 'truck gun'...new Wilson/Scattergun Border Patrol arrives tomorrow to cover HD duties.

http://img.tapatalk.com/ae6d00e8-8450-6323.jpg

[whitebread]

Updated on next page.

[GlockPistola]

My KSG with Aimpoint Micro in a Yankee Hill riser.

http://i16.photobucket.com/albums/b17/Master-G/_MG_3658_2.jpg

http://i16.photobucket.com/albums/b17/Master-G/_MG_3651_2.jpg

http://i16.photobucket.com/albums/b17/Master-G/_MG_3655.jpg

:wow: Nice!

[Glockdude1]

http://img.tapatalk.com/4af2d6c7-4388-e496.jpg

I see great minds think alike.
http://i49.tinypic.com/2vmcawg.jpg

:cool:

[MeanAction]

My HD:
Mossberg 500 Persuader
Hogue Tamer pistol grip
Surefire G2 w/ 120 lumen bulb
CDM Gear light mount
Meprolight Tru-Dot Night Sight
Magpul AFG forend
Marine Coat Heatsheild

[whitebread]

I just couldn't leave my 870 well enough alone. I hate this forum!

226851

[Veedubklown]

I just couldn't leave my 870 well enough alone. I hate this forum!
http://glocktalk.com/forums/attachment.php?attachmentid=226851&d=1343877601

I agree. This forum has caused me to spend more money than booze.

[dajcarroll]

http://i1250.photobucket.com/albums/hh524/dajcarroll/469cc719.jpg

My current (work in progress) setups for both my 12 gauges. NEF Pardner has a 5 shot shell sleeve filled with 00 Buck, recoil pad (not pictured), and a green TruGlo Fiberoptic front sight, 28" full choke barrel. Currently also serves as my trap/skeet gun. My Winchester 1300 is a Ranger modelwith a 22" smooth cylinder deer slug barrel with rifle sights. Currently has see through (not pictured) scope rings with a Simmons ProDiamond shotgun scope mounted, and a solid recoil pad as well. Holds 4+1 of Remington Managed Recoil 00 Buck. Looking to mount slings with extra shell holders on both, and maybe a mag extension for the pump. I'm all about wood stocks... I like old school, so they aren't exactly "tactical". I'll get there eventually. Maybe.

Feedback and suggestions are welcome!


G19 - Gen 3
G37 - Gen 3
Winchester 1300 Ranger 12 Ga.
NEF Pardner SBI 12 Ga.
Savage 24 O/U - .22LR/410

[fasteddie565]

My M4 was a marine Desert Camo color. I finally got sick of it and painted it.

No offense to my Devil Dog Brethren.

[Kilrain]

My M4 was a marine Desert Camo color. I finally got sick of it and painted it.

No offense to my Devil Dog Brethren.

What's hanging off the fore grip?

[whitebread]

What's hanging off the fore grip?

Magpul Angled Fore Grip (AFG).

[Kilrain]

Magpul Angled Fore Grip (AFG).

Thanks for the reply. I checked it out on Magpul's website. Weird looking for sure, but as long as someone likes it, seems cool to me.

[NeverMore1701]

I don't see how they work on a shotgun as you're supposed to wrap your thumb over the barrel.

[Kilrain]

I don't see how they work on a shotgun as you're supposed to wrap your thumb over the barrel.

I looked at some of the Magpul videos where their two instructor guys are using them. They are laying their thumb parallel to the barrel, extended forward and resting on the fore grip. I think they are going for grip consistency since it looks similar to a thumbs forward position with a pistol.

http://img.photobucket.com/albums/v229/kilrain/Public%202/5e14fcb2.jpg

I don't think it's any better or worse based on what I saw in the videos and "looks" a bit strange to me however if it works for them or someone else, more power to them.

[NeverMore1701]

Hell, I don't even like 'em on a rifle, was just trying to imagine their effectiveness on a shotgun. Different strokes and all that.

[MeanAction]

Hell, I don't even like 'em on a rifle, was just trying to imagine their effectiveness on a shotgun. Different strokes and all that.
You can't imagine their effectiveness? Not even if you close your eyes and grunt while you imagine as hard as you can?

[NeverMore1701]

Not even then.

[badge315]

Finally bit the bullet and sprung for a Magpul shotgun stock for my dedicated home defense 870...and it was worth every penny. It has the best ergonomics of any shotgun stock I've ever used...and I've tried them all.

http://i122.photobucket.com/albums/o263/badge315/Guns%20-%20Shooting/DSCF0317.jpg

[Kilrain]

Finally bit the bullet and sprung for a Magpul shotgun stock for my dedicated home defense 870...and it was worth every penny. It has the best ergonomics of any shotgun stock I've ever used...and I've tried them all.

http://i122.photobucket.com/albums/o263/badge315/Guns%20-%20Shooting/DSCF0317.jpg

Nice looking shotgun. You gonna hang one of the triangles off the fore grip too?

[badge315]

Nice looking shotgun. You gonna hang one of the triangles off the fore grip too?

Never really thought about it until now...but I wouldn't rule it out. :supergrin:

[whitebread]

What foregrip is that?

[badge315]

What foregrip is that?

That's an old-school Surefire 618.

[Kilrain]

That's an old-school Surefire 618.

I got one of them on my old Marine Magnum too.....

http://img.photobucket.com/albums/v229/kilrain/Public%202/2d16cf22.jpg

Also, if you haven't done so, do yourself a favor and buy one of these:

http://www.dealextreme.com/p/cree-xp-g-r5-320-lumen-white-light-led-drop-in-module-26-5mm-29-3mm-18v-max-32953?item=2

They make the light much better/brighter and it's cheap to boot.

[whitebread]

Thanks for the info. I didn't realize there was an 'older version' of the 618. As far as lights on go, I think the 318/618 is the only answer...regardless of its vintage.

[Aiden]

Does this count? It's black and scary looking...

http://i.imgur.com/9Gylm.jpg

[whitebread]

Does this count? It's black and scary looking...

http://i.imgur.com/9Gylm.jpg

OMG, OMG, OMG!!! I have been searching for the 3 gun model and nobody has them. Very nice!!!

[Aiden]

It's actually a factory Benelli M2 that was worked over by Rose Action Sports.

Essentially all the things that are in the 3gun edition, except the little 3gun on the side.

[whitebread]

Look who has egg on their face. Beautiful gun with or without that 3 gun logo.

[Aiden]

Thank you, I quite like it myself!

[pgg00]

This is what I use at work. It is a fun gun to shoot.
http://i525.photobucket.com/albums/cc340/yigottabcleatus/bd1039cc4d115fa9518ca7e93ff5a75a.jpg

[Veedubklown]

This thread needs more hump-back!

I finally chopped my remington model 11

http://i39.photobucket.com/albums/e197/veedubklown/Firearms/DA43580B-2931-46AC-9B45-7FB2A34106CA-14958-00000623C085301F.jpg

Still a work in progress.

[Glockdude1]

This thread needs more hump-back!

I finally chopped my remington model 11

http://i39.photobucket.com/albums/e197/veedubklown/Firearms/DA43580B-2931-46AC-9B45-7FB2A34106CA-14958-00000623C085301F.jpg

Still a work in progress.

http://www.csmonitor.com/var/ezflow_site/storage/images/media/content/2012/0713-bonnie/13130824-1-eng-US/0713-bonnie_full_600.jpg

:supergrin:

[Veedubklown]

http://www.csmonitor.com/var/ezflow_site/storage/images/media/content/2012/0713-bonnie/13130824-1-eng-US/0713-bonnie_full_600.jpg

:supergrin:

Ding ding! That's exactly the look I was goin for. I'm interested in their loop sling they had over the back of the butt, I've only ever seen 1 pic of it. It was just a strip of leather, screwed to the top and bottom of the buttstock, and looped over the shoulder. Simple enough to recreate, but I may just go with a traditional sling.

Although, mine's of legal length. 18" barrel and 35" OAL, without a recoil pad installed.

Hers was also a 20ga, but, Barrow used a 12ga

http://texashideout.tripod.com/cbarrowpns.jpg

gotta love 1930's tactical.