Tactical Shotgun Pics Thread

[-gunut-]

I looked at some of the Magpul videos where their two instructor guys are using them. They are laying their thumb parallel to the barrel, extended forward and resting on the fore grip. I think they are going for grip consistency since it looks similar to a thumbs forward position with a pistol.

http://img.photobucket.com/albums/v229/kilrain/Public%202/5e14fcb2.jpg

I don't think it's any better or worse based on what I saw in the videos and "looks" a bit strange to me however if it works for them or someone else, more power to them.

It doesn't look like he's using one. ?

[Kilrain]

It doesn't look like he's using one. ?

Perhaps he's not, hard to tell but I recall those fellas having numerous shotguns of various types. Some had the triangle fore grip thing, some didn't.

Either way, I assume it's to assist in the type of "thumb forward" hand grip he has in the picture I posted and that they apparently use/advocate. I can see that with that type of hand grip on a standard, parallel to the bore, type of fore grip could cause issues in that it seems to "break" or bend the wrist forward and down a bit. The triangle thing it seems could help to reduce or prevent the wrist "break" or bend.

http://img.photobucket.com/albums/v229/kilrain/Public%202/45a9f9f0.jpg

:dunno:

[Yzerman]

I kept all the original parts (wood stock and forend, 28" vent rib remchoke barrel), but here's how the 870 looks now...

[NeverMore1701]

Perhaps he's not, hard to tell but I recall those fellas having numerous shotguns of various types. Some had the triangle fore grip thing, some didn't.

Either way, I assume it's to assist in the type of "thumb forward" hand grip he has in the picture I posted and that they apparently use/advocate. I can see that with that type of hand grip on a standard, parallel to the bore, type of fore grip could cause issues in that it seems to "break" or bend the wrist forward and down a bit. The triangle thing it seems could help to reduce or prevent the wrist "break" or bend.

http://img.photobucket.com/albums/v229/kilrain/Public%202/45a9f9f0.jpg

:dunno:

I dig it for a rifle with a handguard, no way I'd be putting my entire thumb on a bare barrel though.

[SGT HATRED]

Just picked this up.... Benelli 121 M1
http://i132.photobucket.com/albums/q37/Merlin-X/2012-08-27171444.jpg
http://i132.photobucket.com/albums/q37/Merlin-X/2012-08-27171507.jpg

[Kilrain]

Just picked this up.... Benelli 121 M1
http://i132.photobucket.com/albums/q37/Merlin-X/2012-08-27171444.jpg
http://i132.photobucket.com/albums/q37/Merlin-X/2012-08-27171507.jpg

If I were to ever own another Benelli, that'd be it!

[SGT HATRED]

I figure that it would pair up nicely with my M3...

[skud_dusty]

http://i.imgur.com/tyrHB.jpg

Just bought this ugly turd for the low price of $165. Now to find a normal stock and have some fun :)

[MindBeyondAverage]

Home Defense...

http://i1105.photobucket.com/albums/h354/mindbeyondaverage/HDS.jpg


Combat/Slug Shooter...

http://i1105.photobucket.com/albums/h354/mindbeyondaverage/shotgun.jpg
Gonna move the Eotech up when I find a good ghost ring sight for the picatinny rail. Had the Burris Fastfire 3 on it but felt better with Eotech on the shotgun and FF3 on the AK.

[dakrat]

http://i.imgur.com/tyrHB.jpg

Just bought this ugly turd for the low price of $165. Now to find a normal stock and have some fun :)

lol. I would not pull the trigger on that one :rofl:

[Walk Soft]

Not really something I would have put together,but I got it for a hundred bucks from a desperate friend.It's a Mossberg 500 with a ported slugster barrel.Why would you need a ported barrel on a pump gun?,and how hard is it to change barrels?
http://http://i1189.photobucket.com/albums/z433/lexibilly/SAM_0044.jpg

[G19freak]

Changing barrels on a 500 is really easy--just pull the slide halfway back and unscrew the cap on the end of the magazine tube.

[mr00jimbo]

18 inch express with stock bead sight and wood furniture.
http://img825.imageshack.us/img825/1293/004dbr.jpg (http://imageshack.us/photo/my-images/825/004dbr.jpg/)
http://img89.imageshack.us/img89/3456/008dmk.jpg (http://imageshack.us/photo/my-images/89/008dmk.jpg/)

[n0leafcl0ver]

home built ( hacksaw) rem 870, 6 pos stock, works great...
http://us.mg5.mail.yahoo.com/ya/download?mid=2_0_0_1_118021_AI5XimIAAYBgUExsbAPQDAMZZWo&pid=2&fid=Inbox&inline=1

[Rupert]

Zinc park,stock cut to 12.75"LOP and recoil pad reground.Thats about it other than a Big Dot bead and Wilson safety, spring,and follower..:whistling:
http://i200.photobucket.com/albums/aa212/mfleishman/008-1.jpg

I like that a lot. Can you tell more about the finish? Sink parkerized? Is that correct?

[CharlieDelta127]

http://farm9.staticflickr.com/8168/7428392414_1b861585fc_h.jpg

I really like this set up. Nice, and simple.

[Teej]

I dig it for a rifle with a handguard, no way I'd be putting my entire thumb on a bare barrel though.

It looks like it, but I don't think his thumb is actually on the barrel......

[NBT]

Well thanks to the forum regarding the advice given on the accessories on my 870 Express. Night and day from the stock 870 to now.

Mesa Tactical Urbino Stock
CeraKote 18" Barrel- with Tritium night sights
Six shell side saddle
Sure Fire M69 foregrip
Sure Fire TLR1 light
Blackawk vertical pistol grip

Just need a good mag extension, (had one and didn't like it) and a sling and she's done.

http://i46.photobucket.com/albums/f106/nothnbutrouble/009_zps59f7fdc8.jpg

http://i46.photobucket.com/albums/f106/nothnbutrouble/012_zpsad3bdce5.jpg

http://i46.photobucket.com/albums/f106/nothnbutrouble/016_zps58ec0d07.jpg

http://i46.photobucket.com/albums/f106/nothnbutrouble/cameraphone002_zps94df2120.jpg

[Inebriated]

Magpul forend, factory Remington stock, Mesa Tactical 6-round side saddle, and inside there's a heavy sear spring and the carrier dog follower spring from a Tactical model. Don't mind the thing around the stock, it's just a wall hanger for guitars.
http://i207.photobucket.com/albums/bb201/Name890/870MPul.jpg

[JDennis]

Not really tactical, but I call it practical tactical. My do it all 870 Super Magnum, this is HD set up, this barrel is the 21" turkey barrel which is perfect for HD and 3 gun I feel, but have a slug barrel and 28" barrel for hunting and trap. Just got done refinishing the ugly blonde stock in a custom stain and poly.

http://i897.photobucket.com/albums/ac174/JGDennisJr/870super.jpg

Just finished up this build. Always wanted a Marine shotgun so found a steal on a new 500 Mariner. Added a ATI Talon stock which is awesome and really helps with recoil, a ATI shell holder rather than the cheek riser, Meprolight front night sight, and a laserlyte tube rail for a light.

http://i897.photobucket.com/albums/ac174/JGDennisJr/Mariner.jpg

And the two together

http://i897.photobucket.com/albums/ac174/JGDennisJr/Both.jpg

[Sportsfame18]

[QUOTE=MindBeyondAverage;19377643]Home Defense...

http://i1105.photobucket.com/albums/h354/mindbeyondaverage/HDS.jpg

I bet shooting that is fun lol

[whitebread]

Magpul forend, factory Remington stock, Mesa Tactical 6-round side saddle, and inside there's a heavy sear spring and the carrier dog follower spring from a Tactical model. Don't mind the thing around the stock, it's just a wall hanger for guitars.
http://i207.photobucket.com/albums/bb201/Name890/870MPul.jpg

You going to loose the factory stock? Even something like the Hogue would give you a shorter LOP, grippier surface, mad more solid feel. Or the SGA would be a great addition to the forend...it has stunning ergonomics despite the odd appearance.

[Inebriated]

You going to loose the factory stock? Even something like the Hogue would give you a shorter LOP, grippier surface, mad more solid feel. Or the SGA would be a great addition to the forend...it has stunning ergonomics despite the odd appearance.
Funny you say that... I've been flip-flopping on stocks lately. I picked up a Hogue 14" or whatever (not the 12"), and I've had a Mesa Urbino for some time now.

Spent about 4 hours at the range a couple days ago, and settled on the Urbino. Good size, good grip, very comfortable, points the best, and as a bonus, looks better than either of the other two.

EDIT - here's how it sits right now.
http://i207.photobucket.com/albums/bb201/Name890/8701012.jpg

[RJDSRT]

My Mossberg 500!


Outdoor Hub mobile, the outdoor information engine

[DreamWeaver88]

My newest. Just for bugs though. :tongueout:

http://pic80.picturetrail.com/VOL806/138216/326854/404427058.jpg
http://pic80.picturetrail.com/VOL806/138216/326854/404427059.jpg
http://pic80.picturetrail.com/VOL806/138216/326854/404427061.jpg

[nursetim]

So you don't pepper'em, you asalt them, right?

[DreamWeaver88]

So you don't pepper'em, you asalt them, right?

lol.....I bet pepper would work too.

I might have to use it on my food, since fly season is done.

[Angry Fist]

My newest. Just for bugs though. :tongueout:

http://pic80.picturetrail.com/VOL806/138216/326854/404427058.jpg
http://pic80.picturetrail.com/VOL806/138216/326854/404427059.jpg
http://pic80.picturetrail.com/VOL806/138216/326854/404427061.jpg
I saw the video, those are cool. How much?

[DreamWeaver88]

I saw the video, those are cool. How much?

I believe I paid like 30 or 35 for it.

[Clutch Cargo]

My old Winchester 1200 Defender looks like this:
http://picturearchive.gunauction.com/1127193027/6421256/07925ef0df4c152a34dfda3e4fa98411.jpg

[JDennis]

My newest. Just for bugs though. :tongueout:

http://pic80.picturetrail.com/VOL806/138216/326854/404427058.jpg
http://pic80.picturetrail.com/VOL806/138216/326854/404427059.jpg
http://pic80.picturetrail.com/VOL806/138216/326854/404427061.jpg


I am still waiting for mine! Ordered mine a week and a half ago, but they said they are backordered. Found a 20% coupon on the net so ordered one for my dad as well.

[PVolk]

My Benelli M1 Super 90. It's an old LE issue model.
* Oversized charging handle
* Side saddle
* Surefire light/forgrip (1st gen)
* Surecycle recoil tube assembly
* Threaded for choke

http://i68.photobucket.com/albums/i17/paulvolk/utf-8BSU1HLTIwMTExMDA0LTAwMDY4cnMuanBn.jpg

[GasTurbine]

18.5" Barrel
8+1 (+ 6 caddy)

EOTech Sight
Surefire Tac Light
Badger Sling

http://www.n8wct.com/web/930/IMG_4319.jpg


http://www.n8wct.com/web/930/IMG_4320.jpg


http://www.n8wct.com/web/930/IMG_4321.jpg


http://www.n8wct.com/web/930/IMG_4322.jpg

[benji]

http://i47.tinypic.com/286tzsz.jpg

My 'tactical' 835

[Sharkey]

Well I was gonna post a pic of only my home SD shotgun but figured you'll would like this better.

http://i207.photobucket.com/albums/bb93/dcdainv/DSCF0547.jpg

[whitebread]

Here is my latest defensive shotgun. I wanted a pistol grip gun and didn't want to convert any of my other shotguns, so I picked this up at lunch today. Model 24403. A few hours later she is finished. Wilson +2, Wilson oversized safety, Mesa 6-round side saddle, Mesa Urbino stock, and SureFire 618LMG.

I will put some rounds through her on Sunday.

http://www.brusabass.com/blog/media/1/870p.jpg

[jaggedx]

Here's my build on my Mossberg 930spx Blackwater.

Before:
http://i.imgur.com/grWtL.jpg

After:
http://i.imgur.com/vA30E.jpg

[AC45ACP]

Well I had a little free time.....

Details

Barrel cut to 20” and re-threaded for chokes.
- Brass bead installed and Fiber Optic
- Nordic magazine extension
- Noveske QD sockets to both sides of the stock for quick sling mounting
- oversized bolt handle (JM/SPX style)
- Elite Tactical Advantage oversized safety
- Welded up carrier to get rid of the "devil's fork" and opened up the loading port
- polished all of the internal parts – bolt, carrier, mag tube, gas piston, chamber,
barrel extension, etc.
- Urban Digital Camo

New Pics....


http://i843.photobucket.com/albums/zz355/ac45acp/930-2camo.jpg

http://i843.photobucket.com/albums/zz355/ac45acp/930-4camo.jpg

http://i843.photobucket.com/albums/zz355/ac45acp/930-5camo.jpg

http://i843.photobucket.com/albums/zz355/ac45acp/930-3camo.jpg

http://i843.photobucket.com/albums/zz355/ac45acp/930winston.jpg

[Kilrain]

Well I had a little free time.....

Details

Barrel cut to 20” and re-threaded for chokes.
- Brass bead installed and Fiber Optic
- Nordic magazine extension
- Noveske QD sockets to both sides of the stock for quick sling mounting
- oversized bolt handle (JM/SPX style)
- Elite Tactical Advantage oversized safety
- Welded up carrier to get rid of the "devil's fork" and opened up the loading port
- polished all of the internal parts – bolt, carrier, mag tube, gas piston, chamber,
barrel extension, etc.
- Urban Digital Camo

http://i843.photobucket.com/albums/zz355/ac45acp/930-3.jpg

Cool rig.

[jaggedx]

Here's a couple upgrades I made to my Mossberg 930spx Blackwater.
Before:
[/URL]
After:
[URL="http://i.imgur.com/vA30E.jpg"] (http://i.imgur.com/grWtL.jpg)

[MfWiC]

S-12 8" SBS that Will built me years before the show.
229545

[MfWiC]

How do you like the KSG?






Well I was gonna post a pic of only my home SD shotgun but figured you'll would like this better.

http://i207.photobucket.com/albums/bb93/dcdainv/DSCF0547.jpg

[jaggedx]

My Mossberg 930 SPX Blackwater with new furniture:
http://i.imgur.com/vA30E.jpg

[MfWiC]

Wilson Combat Remington Express Magnum 870
12" SBS.
229546

[Sharkey]

How do you like the KSG?

I like mine. I get tired of folks complaining about them IF they haven't shot them. 250 rds of 00 with one guy short stroking I once. It definitely has a different manual of arms for reloads but makes up for it with being compact. The weak point is the plastic rail molded into the pump action. Some have broken but Kel Tec fixes it soon enough. I imagine the next generation will remedy that.

[dajcarroll]

http://i1250.photobucket.com/albums/hh524/dajcarroll/F4991267-76E0-4166-8AB6-E4A19AB1EBE4-17599-000017133041CC5A.jpg

Winchester 1300 Ranger - 22" smooth bore open choke deer slug barrel, Williams Fire fiberoptic rifle sights (green rear and red front), +3 magazine extension (8 round total cap), Simmons ProDiamond shotgun scope, sling mounts with Blackhawk 15 round sling, wood furniture w/ diamond cuts and rubber recoil pad, loaded with Federal Premium LE #1 Buck (low recoil w/ flight control wad), 10 rounds of Winchester military grade 00 Buck and 5 Federal 1oz. slugs in the sling.


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

[Veedubklown]

S-12 8" SBS that Will built me years before the show.
http://glocktalk.com/forums/attachment.php?attachmentid=229545&d=1355081262

If it's got that RJF logo on it, that thing is probably worth some stupid money now. Not to say it was cheap back then, I'm sure! I'm not a fan of the show, but I'm a fan of this!

[MfWiC]

This was before the logo and show. But has (H) stamped in front of the serial #. I'm sure it's still worth crazy money. But I will never part with it.

[aandrew610]

My mossberg 500 tactical


http://imageshack.us/a/img717/3268/shotgunbuildfinal.jpg

[whitebread]

Here is my new M4 with a few do-dads and trinkets I found at the bottom of a cereal box. I am very happy with it so far.

http://www.brusabass.com/images/generic/IMG_0644.JPG

[greysquirrell]

If you need a red dot or Eotech for your HD shotty your in over your head

[Airborne Infantryman]

Benelli Super Nova Tactical w/ factory collapsible stock and + 3 extension. Holds 7 + 1.

http://farm9.staticflickr.com/8077/8299534226_595b297433_b.jpg

[greysquirrell]

Ironic same set up minus the stock and that gun will eat any ammo u feed it enough said good pic and great choice

[whitebread]

The store had this on the wall today and I just couldn't leave it behind (I have a soft spot for ghost rings). I have to do something about the LOP. Other than that, it is very light and handles extremely well.

http://www.brusabass.com/images/generic/IMG_0563.JPG

Did a little work on her today (12/29) - it as raining and my hunting land was all soggy so I had some spare time. Got the bolt handle, safety, follower, mag spring, and mag tube swapped out...just waiting on the Urbino Stock and sling to arrive on Monday. I do think I will change the Mesa clamp out for a Nordic one because it is a little lighter, but the Mesa is what I had lying around. And as usual, Mike's Metal Works parts were top notch and fit perfectly.

http://www.brusabass.com/images/generic/IMG_0567.JPG

[chr_edw]

Very Nice Whitebread

[SGT45]

Here is my new M4 with a few do-dads and trinkets I found at the bottom of a cereal box. I am very happy with it so far.

http://www.brusabass.com/images/generic/IMG_0570.JPG

OK White!!!!

Tell me about this beauty!!!! Is that a Mesa stock? with a Limb saver? How is the Mesa Stock with the Limb saver-does it reduce the recoil significantly? What type mag. extension??? Thanks for any and all info. my friend!

[Inebriated]

OK White!!!!

Tell me about this beauty!!!! Is that a Mesa stock? with a Limb saver? How is the Mesa Stock with the Limb saver-does it reduce the recoil significantly?
Impressively so. I've noticed that I can feel the gun move back, compress the pad, then push my shoulder. It's kind of cool.

[whitebread]

OK White!!!!

Tell me about this beauty!!!! Is that a Mesa stock? with a Limb saver? How is the Mesa Stock with the Limb saver-does it reduce the recoil significantly? What type mag. extension??? Thanks for any and all info. my friend!

I love the Mesa stocks and use them on all my shotguns. I originally hated the look of pistol grips so I never gave them a shot, but one day in a gun shop I shouldered one on a used 870 and was sold. The LOP and ergonomics were absolutely perfect. If you ever do any sort of patrol on with a two point sling, the shape of their pistol grip makes going from slung to shouldered extremely natural. I have tried the Speedfeed and Koxx pistol grips and have not noticed the same...I think the flat-ish back and high cut on the back side aid in this. As far as the limbsaver, it is a good pad, but I wouldn't say it is light years ahead of the other pads. I feel no difference when shooting, however compared to the Remongton R3 pad, shooting 100+ full power slugs will not leave me bruised or sore the next day. (I never shot the gun with the original stock - that thing had a LOP that would be too long for the jolly green giant. For reference, I am 6' with normal proportions, not little dwarf arms.)

The mag extension pictured is Tac-Star, but that would only fit 6-shells, so i changed to Dave's Metal Works. Dave's fits a full 7-shells (2-3/4") and still leaves ~1/2" of movement in the tube. The finish of his also matches the gun much better. I have one of his 1-piece tubes that I will put on once I get the balls to take heat to the receiver. FWIW, I also use his large bolt handles and like them better than Nordic.

[Airborne Infantryman]

Assault Rifle? Nope. How about a mother ****ing assault shotgun? :tbo:

This should make the gun-hating ******* cry out in fear.

Benelli Super Nova Tactical. Factory collapsible stock, factory +3 extension. Holds 8 + 1.

http://farm9.staticflickr.com/8513/8351491801_7b23cf9472_b.jpg

http://farm9.staticflickr.com/8229/8352553720_f3472e85f8_b.jpg

[chr_edw]

Assault Rifle? Nope. How about a mother ****ing assault shotgun? :tbo:

This should make the gun-hating ******* cry out in fear.

Benelli Super Nova Tactical. Factory collapsible stock, factory +3 extension. Holds 8 + 1.

http://farm9.staticflickr.com/8513/8351491801_7b23cf9472_b.jpg

http://farm9.staticflickr.com/8229/8352553720_f3472e85f8_b.jpg

Dang nice super nova.... Does the tactical still have the 3.5" chamber?

[Airborne Infantryman]

Dang nice super nova.... Does the tactical still have the 3.5" chamber?

Oh yes it does!

.........and I do not recommend utilizing 3.5" shells out of it unless you get kicks out of self-inflicted pain. :faint:

[chr_edw]

Oh yes it does!

.........and I do not recommend utilizing 3.5" shells out of it unless you get kicks out of self-inflicted pain. :faint:

Awesome.... Yea just because you can don't mean you should, but nice to have the option or use it on a turkey :cool:

[SGT45]

I love the Mesa stocks and use them on all my shotguns. I originally hated the look of pistol grips so I never gave them a shot, but one day in a gun shop I shouldered one on a used 870 and was sold. The LOP and ergonomics were absolutely perfect. If you ever do any sort of patrol on with a two point sling, the shape of their pistol grip makes going from slung to shouldered extremely natural. I have tried the Speedfeed and Koxx pistol grips and have not noticed the same...I think the flat-ish back and high cut on the back side aid in this. As far as the limbsaver, it is a good pad, but I wouldn't say it is light years ahead of the other pads. I feel no difference when shooting, however compared to the Remongton R3 pad, shooting 100+ full power slugs will not leave me bruised or sore the next day. (I never shot the gun with the original stock - that thing had a LOP that would be too long for the jolly green giant. For reference, I am 6' with normal proportions, not little dwarf arms.)

The mag extension pictured is Tac-Star, but that would only fit 6-shells, so i changed to Dave's Metal Works. Dave's fits a full 7-shells (2-3/4") and still leaves ~1/2" of movement in the tube. The finish of his also matches the gun much better. I have one of his 1-piece tubes that I will put on once I get the balls to take heat to the receiver. FWIW, I also use his large bolt handles and like them better than Nordic.

Thanks Whitebread!!!

[SGT45]

Assault Rifle? Nope. How about a mother ****ing assault shotgun? :tbo:

This should make the gun-hating ******* cry out in fear.

Benelli Super Nova Tactical. Factory collapsible stock, factory +3 extension. Holds 8 + 1.

http://farm9.staticflickr.com/8513/8351491801_7b23cf9472_b.jpg

http://farm9.staticflickr.com/8229/8352553720_f3472e85f8_b.jpg

Nice, Very Nice. I will be adding the ext. to my SNT. Not so sure on the C-stock- How is it with recoil?

[NITE SITE 53]

Benelli Nova Tactical + Extension

[Victoriagotagun]

Assault Rifle? Nope. How about a mother ****ing assault shotgun? :tbo:

This should make the gun-hating ******* cry out in fear.

Benelli Super Nova Tactical. Factory collapsible stock, factory +3 extension. Holds 8 + 1.

http://farm9.staticflickr.com/8513/8351491801_7b23cf9472_b.jpg

http://farm9.staticflickr.com/8229/8352553720_f3472e85f8_b.jpg

Did the factory collapsible stock come with your SNT or did you buy it separately?

[EddieJames]

Great looking shotguns

[Airborne Infantryman]

Nice, Very Nice. I will be adding the ext. to my SNT. Not so sure on the C-stock- How is it with recoil?


The C Stock is no worse than the standard stock. That said, prepare for pain whwn shooting 3.5 shells.

posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

[Airborne Infantryman]

Did the factory collapsible stock come with your SNT or did you buy it separately?

I bought it separately. You can find them on GunBroker.

posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

[Spartacus100]

Here is what i have at home. Its a SAR 12 ga. Semi Auto Special Purpose Shotgun (SARSASP)- Sarsilmaz, imported by EAA Corp/USSG.

Although this is a stock photo taken off the net its exactly what i have on a rack above my closet door.

[SGT45]

My new Benelli M4! Cell Phone pic. Will get better pics with her sister- Benelli SNT.

http://i19.photobucket.com/albums/b194/SGT4527/2013-01-19_15-26-10_727_zps07594a1f.jpg

[Jagman1]

Saiga by Tromix.
Thanks Tony !!
Rob.


http://images59.fotki.com/v111/photos/2/139782/9498035/043_crop-vi.jpg

[Glockdude1]

Saiga by Tromix.
Thanks Tony !!
Rob.


http://images59.fotki.com/v111/photos/2/139782/9498035/043_crop-vi.jpg

:thumbsup:

[nursetim]

Saiga by Tromix.
Thanks Tony !!
Rob.


http://images59.fotki.com/v111/photos/2/139782/9498035/043_crop-vi.jpg

This is art.

[amd65]

It's a Benetta, no a Bernelli...nah, it's a Beretta 1201FP. Detroit Police surplus.
http://i61.photobucket.com/albums/h61/amd6547/DSC02278.jpg
http://i61.photobucket.com/albums/h61/amd6547/DSC02281-1.jpg

[jooos]

I just purchased a Mossberg 930 Semi Auto 12 ga I with a muzzle brake, I couldn’t pass it up for the price and I was told the 930 will use a lot of the same aftermarket parts that the 500 uses, so it should be easy to customize. I would like to add a tube extension, pistol grip stock, ghost rings and Picatinny rail.

http://i119.photobucket.com/albums/o148/cumminsjason/Gun/GEDC0544_zpsb669ce63.jpg

http://i119.photobucket.com/albums/o148/cumminsjason/Gun/GEDC0535_zpsf5bd608e.jpg

[crazyasian1]

Saiga by Tromix.
Thanks Tony !!
Rob.


http://images59.fotki.com/v111/photos/2/139782/9498035/043_crop-vi.jpg

oh GAWDDANG that is HAWT!!

[AC45ACP]

Details
Carrier Comp Mag Tube
FFT- follower, Hammer, Hand Guards, 3/4 Charging Handle
SA- Rail w/4rd Shell carrier and 2rd carrier..

I'm going to replace the 4rd Carrier for a 8rd and add a Trijicon RMR
Then buy a lot on ammo..




http://i843.photobucket.com/albums/zz355/ac45acp/BellaM4_zps9b233038.jpg

http://i843.photobucket.com/albums/zz355/ac45acp/BellaM42_zps86199d51.jpg


Benelli M4 - YouTube

[sublime]

My new Remington model 25077, TacStar shell holder and a Scattergun Tech 1 shell extension. I still need to drill the dimples out. My follower must be hitting them because I can still only hold six. Need a light and I'll call it good.

http://img.photobucket.com/albums/v247/TXBRP/FLATS%20CAT/519161F0-7AD0-4E1B-905D-850C10A650BF-2302-0000021CF306B563_zpsb9db584e.jpg

Dead pumpkin

http://img.photobucket.com/albums/v247/TXBRP/FLATS%20CAT/B8E4986C-D455-4167-A54F-3CE5F1D7BF72-2302-0000021CFAFD6FEA_zps1206a6b5.jpg

[SAUERGLOCKS]

[QUOTE=sublime;19952033]My new Remington model 25077, TacStar shell holder and a Scattergun Tech 1 shell extension. I still need to drill the dimples out. My follower must be hitting them because I can still only hold six. Need a light and I'll call it good.

http://img.photobucket.com/albums/v247/TXBRP/FLATS%20CAT/519161F0-7AD0-4E1B-905D-850C10A650BF-2302-0000021CF306B563_zpsb9db584e.jpg

Nice 870. I just purchased one myself as would like to see a side shot of the +1 extension if possible. Does it extend past the end of the barrel at all? And how did you go about removing the dimples?

Thanks for any help on these matters.

[ChaseUK02]

Lots of nice HD shottys.

Here's mine, Mossy 500 with ATI pistol/stock, Magpul hand stops and a light/laser combo.

As they say...if it's lit, it's hit. :cool:

[canesfan]

For "tactical" situations, I've never been a big fan of gadgets. I keep mine simple.;)

http://i137.photobucket.com/albums/q236/USMCGruntUSAFCATM/Firearms/Shotguns/DCP_1856.jpg

Ithaca Model 37? I would love to get my hands on one! Great Gun!

[sublime]

Nice 870. I just purchased one myself as would like to see a side shot of the +1 extension if possible. Does it extend past the end of the barrel at all? And how did you go about removing the dimples?

Thanks for any help on these matters.

Yes, the extension sticks past the end of the barrel by about 3/8" or so. I'd rather it not, but it is what it is. It doesn't look that bad I don't think. I haven't taken care of the dimples yet, but I think I'll try the method where you take a 16 or 17mm socket and run it through the extension, forcing the dimples out.

http://img.photobucket.com/albums/v247/TXBRP/FLATS%20CAT/26184289-8210-4849-AD93-3859015F7A99-4105-000002AB268C41FB_zpsd46c51b0.jpg

[SAUERGLOCKS]

Yes, the extension sticks past the end of the barrel by about 3/8" or so. I'd rather it not, but it is what it is. It doesn't look that bad I don't think. I haven't taken care of the dimples yet, but I think I'll try the method where you take a 16 or 17mm socket and run it through the extension, forcing the dimples out.

http://img.photobucket.com/albums/v247/TXBRP/FLATS%20CAT/26184289-8210-4849-AD93-3859015F7A99-4105-000002AB268C41FB_zpsd46c51b0.jpg

Bingo! That's what I was looking for reference-wise. Thank you. I was afraid of it sticking past the end of the barrel too. Thanks again for the pic.:thumbsup:

[SouthpawG26]

I built this 870 way back in 02/03.

http://img.photobucket.com/albums/v672/cervelop2k/213b33d0d4186b30ab63e4aa262271fd_zps84666723.jpg

http://img.photobucket.com/albums/v672/cervelop2k/d2a38b4d21e418f28eaa2a195a23b686_zpsfe1938bc.jpg

Pre production Magpul M93A (named MSS at the time) on an ACE A2 grip/stock adapter (I trimmed the lock as I like to run this at 12"LOP or so),
20" barrel with Vang style elongated forcing cone built by Jon Tank,
Custom top rail (there were no ready made kits at the time),
Aimpoint M2 in an ARMS 22M68 mount,
SGT tritium rear, XS tritium Big Dot front,
Surefire M69 picatinny forend, M900A light, with an unbelievable 900lumen Lumens Factory Led head conversion (and my 500lumen X300 Ultra riding in the lefty-tumbbreak position when not in use on a handgun),
Mesa Tactical Shell holders, 6 left, 4 right,
Jon Tank +3 mag tube extension.

[Zeeman1]

Here's the Winchester I'm working on at the moment. I still have to do a few things like: install the tritium front bead, and bronze mid bead, put the fore end on, and figure out which flashlight to get.
http://i1202.photobucket.com/albums/bb362/weswblack/IMG_5039.jpg
http://i1202.photobucket.com/albums/bb362/weswblack/IMG_5040.jpg
http://i1202.photobucket.com/albums/bb362/weswblack/IMG_5038.jpg

Here are some of the main details:
Winchester 120 Ranger 12 gauge with vent rib barrel from a 1300 (approx. 20") (4 Chokes)
Choate top folding stock
Choate 8 round extension tube
Hogue overmolded fore end
Oversized tritium front bead with bronze mid bead
L&M Mounts 1" flashlight mount

[Roneye]

Here are a couple of my recent builds...
http://www.boomboomtactical.com/gbroker/870urbin01.jpg

http://www.boomboomtactical.com/ebay/rem8701A.jpg

http://www.boomboomtactical.com/gbroker/870vc01.jpg

[whitebread]

Here are a couple of my recent builds...
http://www.boomboomtactical.com/gbroker/870urbin01.jpg

http://www.boomboomtactical.com/ebay/rem8701A.jpg

It is good to see someone actually pinning that front sight on. Very nice builds.

[phoenixg23]

http://img91.imageshack.us/img91/3969/saiga12001hr6.jpg
http://img528.imageshack.us/img528/4673/saiga12005zv7.jpg

Just happened up on this thread and saw your baby. She looks good, hope she keeps treating you well. For me, my wife and I agreed I would not go over $300.00 for a new shotgun so I purchased the Stevens Model 320. It fits the need so far. Now to source a sling for it.
Take it easy

[mongoose808]

Here's mine

http://i248.photobucket.com/albums/gg180/mongoose-hole/Guns/Saiga%2012/100_2809_zpsa37d8a7e.jpg

[Nalapombu]

Lord have Mercy!!!

These Saiga's are HOT! I've never shot one but I have handled a couple of stock models off the shelf and thought they would be a lot of fun. These custom versions are just unbelievable. I would love to have some trigger time with these babies.

I'm guessing these would go for $1500 or more, wouldn't they? Especially the ones with short Barrels that require the tax stamp. How well do they work with the budget Wally World BOX shotgun shells everyone likes to use?

The only thing is that I would want to hunt hogs with whatever shotgun I get. Some of these wouldn't be capable of that unless you were right up on them. So can you all tell me how accurate some of these builds are with slugs out to 75 or 100 yards or so? Or should I just forget that idea and just get a Saiga and trick it out knowing it is going to be a single use firearm for HD? Not that there's anything wrong with that.

Thanks for the awesome pics guys.

Nalajr

[nolt]

https://lh5.googleusercontent.com/-zfJgTuM4rA8/UOtCiljDn6I/AAAAAAAAOcw/YoUXAgVUH4U/s1280/870VC.jpg

[Tvov]

https://lh5.googleusercontent.com/-zfJgTuM4rA8/UOtCiljDn6I/AAAAAAAAOcw/YoUXAgVUH4U/s1280/870VC.jpg

Details, details! Parts, addons, etc!

[wvshootr]

http://i445.photobucket.com/albums/qq179/dodgecaliberpassingu/20130319_141530.jpg[/IMG]

posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

[Angry Fist]

Lord have Mercy!!!

These Saiga's are HOT! I've never shot one but I have handled a couple of stock models off the shelf and thought they would be a lot of fun. These custom versions are just unbelievable. I would love to have some trigger time with these babies.

I'm guessing these would go for $1500 or more, wouldn't they? Especially the ones with short Barrels that require the tax stamp. How well do they work with the budget Wally World BOX shotgun shells everyone likes to use?

The only thing is that I would want to hunt hogs with whatever shotgun I get. Some of these wouldn't be capable of that unless you were right up on them. So can you all tell me how accurate some of these builds are with slugs out to 75 or 100 yards or so? Or should I just forget that idea and just get a Saiga and trick it out knowing it is going to be a single use firearm for HD? Not that there's anything wrong with that.

Thanks for the awesome pics guys.

Nalajr
They are a hoot. I can hit a paper plate at 100 yards all day long. Plenty good for hogs. Get one while you can!

[Travclem]

My Benellis
http://i298.photobucket.com/albums/mm252/travclem/67c7abf2-e521-482f-b933-93152721962c_zps43ba8b8d.jpg

[gooffeyguy]

http://i445.photobucket.com/albums/qq179/dodgecaliberpassingu/20130319_141530.jpg[/IMG]

posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

What brand/model sight is that and how do you like it?

[mr00jimbo]

Keepin' it simple: 870 Police Magnum, all stock.
http://img13.imageshack.us/img13/7116/8701.png (http://imageshack.us/photo/my-images/13/8701.png/)

http://imageshack.us/a/img689/2490/020zzh.jpg

[wvshootr]

What brand/model sight is that and how do you like it?

Its a konus micro red dot i got from Amazon. I didn't want a huge red dot on top but did want something that could stand up to constant punishment of full power 00 and slugs. I love the sight and it holds zero just fine. I highly recommend this sight.

posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

[SGT HATRED]

I never got around to taking a group photo...

http://i132.photobucket.com/albums/q37/Merlin-X/2013-03-22074827-1_zps4f0de31e.jpg

http://i132.photobucket.com/albums/q37/Merlin-X/2013-03-22074913_zps9eeae6b9.jpg

http://i132.photobucket.com/albums/q37/Merlin-X/2013-03-22075013_zps9c1059ee.jpg

[The_Gun_Guru]

I forget if I posted in this thread or not:supergrin:

Well, if not.....

http://i203.photobucket.com/albums/aa310/gunguru364/SAIGA-12/saiga-12.jpg

http://i203.photobucket.com/albums/aa310/gunguru364/SAIGA-12/346005616_photobucket_13618_.jpg

http://i203.photobucket.com/albums/aa310/gunguru364/SAIGA-12/0109091620-1.jpg


TGG

[Tscglock]

Saiga by Tromix.
Thanks Tony !!
Rob.


http://images59.fotki.com/v111/photos/2/139782/9498035/043_crop-vi.jpg

Complete perfection... i want so bad!

[chr_edw]

Love the Tromix...Those guys are just down the hwy from here.

[DrunkenParrot]

http://i5.minus.com/icETEc8pLKjPu.jpg

[Kilrain]

http://i5.minus.com/icETEc8pLKjPu.jpg

Very cool setup, straightforward and to the point.

[M1Garand]

It's not really tactical but I wanted to show off my first painted Shotgun.


:)http://farm4.static.flickr.com/3018/2895196405_b8bdba685f.jpg

Wow....

[chr_edw]

Drunken Parrot


Did you shorten up your 590a1 or get another?

[DrunkenParrot]

Drunken Parrot


Did you shorten up your 590a1 or get another?

I registered my 590a1 as a SBS and cut my barrel to 15" on the lathe and do some crown work. I had to engrave my receiver also.
http://minus.com/jbdJK2NFtKmTEQ.jpg
http://minus.com/jrtaRVnF3rLi0.jpg
http://minus.com/jB6DTtdyoMD0f.jpg

[Lugi]

My newest 590A1 model 51517

http://i1354.photobucket.com/albums/q684/NYprepper/20130404_200232_zpsdc5bca7d.jpg

[chr_edw]

Drunken Parrot -

Good clean work! Looks really good. I can't remember, are you using the hogue 12" stock?

[DrunkenParrot]

Drunken Parrot -

Good clean work! Looks really good. I can't remember, are you using the hogue 12" stock?

Yes Iam.

[chr_edw]

That will be my next addition especially if magpul don't get tthe mossberg stuff out soon.

posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

[M1A Shooter]

wish i could find a set of 590 or SPX ghost rings that i could add to my persuader...

[Thomasc18]

Following post..

[HardShell]

14" bbl 870 SBS...

http://i2.photobucket.com/albums/y12/HardShell/RWB%20-%20NFA/870SBS14left_zps0c04755a.jpg

http://i2.photobucket.com/albums/y12/HardShell/RWB%20-%20NFA/870SBS14right_zpsf8057454.jpg

[chr_edw]

wish i could find a set of 590 or SPX ghost rings that i could add to my persuader...

Shouldn't be hard, but I haven't looked in a while.


posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

[M1A Shooter]

Shouldn't be hard, but I haven't looked in a while.


posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)


you would think so... ive looked all over for the older set of ghost rings. might call mossberg and see if i can get a set of SPX sights.

[edctac]

I'm pretty new here, so this seems like a good place to show some toys.

http://i1128.photobucket.com/albums/m489/edctac/20130325_144014_zps4e360b44.jpg

http://i1128.photobucket.com/albums/m489/edctac/20130408_191600_zps3f2fcd41.jpg

http://i1128.photobucket.com/albums/m489/edctac/20130325_145919_zps31591b9e.jpg

[edctac]

This is my 870 tactical. I love it.

http://i1128.photobucket.com/albums/m489/edctac/20130408_191600_zps3f2fcd41.jpg

http://i1128.photobucket.com/albums/m489/edctac/20130325_145919_zps31591b9e.jpg

[jb1911]

http://farm9.staticflickr.com/8124/8654067416_d0f32dcf05_o.jpg

[MStarmer]

This one is pretty "tactical" :) 12.25" LOP with Limbsaver.

http://i245.photobucket.com/albums/gg68/mstarmer/20130416-DSC_1401-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130416-DSC_1401-2.jpg.html)

[MStarmer]

To stay on topic I should post my "tactical" one too. Benelli Super Nova, Mesa rail and shell caddy, Nordic +2 extension / spring and follower. Smooth and magazine override button make it pretty awesome.

http://i245.photobucket.com/albums/gg68/mstarmer/20130416-DSC_1403-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130416-DSC_1403-2.jpg.html)

http://i245.photobucket.com/albums/gg68/mstarmer/20130416-DSC_1402-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130416-DSC_1402-2.jpg.html)

[jooos]

I changed out the factory follower to a GG&G machine mil spec follower, I added a clamp to the barrel for a spare G2 Surefire, and I’m waiting for my Tac 6 shell side mount holder to arrive in mail, I’m still going to change out the stock to a pistol grip and found a bobcat forend.

http://i119.photobucket.com/albums/o148/cumminsjason/Gun/GEDC1231_zpsa45a9b1d.jpg (http://s119.photobucket.com/user/cumminsjason/media/Gun/GEDC1231_zpsa45a9b1d.jpg.html)

http://i119.photobucket.com/albums/o148/cumminsjason/Gun/GEDC1229_zps3770c028.jpg (http://s119.photobucket.com/user/cumminsjason/media/Gun/GEDC1229_zps3770c028.jpg.html)

http://i119.photobucket.com/albums/o148/cumminsjason/Gun/GEDC1226_zps50e223ab.jpg (http://s119.photobucket.com/user/cumminsjason/media/Gun/GEDC1226_zps50e223ab.jpg.html)

I might change as well, I’m looking at changing the factory sites out, but not sure what would work best for a Mosseberg 930 auto 12ga yet, any ideas?

[jb1911]

http://farm9.staticflickr.com/8382/8676134152_0fe2905fc8_b.jpg

[jooos]

http://i119.photobucket.com/albums/o148/cumminsjason/Gun/130422_0005_zps6452062c.jpg (http://s119.photobucket.com/user/cumminsjason/media/Gun/130422_0005_zps6452062c.jpg.html)

Just installed this Tac 6 shot shell side saddle, now just waiting for the mag extender...

http://i119.photobucket.com/albums/o148/cumminsjason/Gun/GEDC1241_zps8dffb70a.jpg (http://s119.photobucket.com/user/cumminsjason/media/Gun/GEDC1241_zps8dffb70a.jpg.html)

http://i119.photobucket.com/albums/o148/cumminsjason/Gun/GEDC1232_zps07ec4848.jpg (http://s119.photobucket.com/user/cumminsjason/media/Gun/GEDC1232_zps07ec4848.jpg.html)

[chr_edw]

Have you shot it yet with that light mount?

I tried one of those on my pump and it stayed on for 2 or 3 rounds. It could have been user error, but have not tried again.


http://i119.photobucket.com/albums/o148/cumminsjason/Gun/130422_0005_zps6452062c.jpg (http://s119.photobucket.com/user/cumminsjason/media/Gun/130422_0005_zps6452062c.jpg.html)

Just installed this Tac 6 shot shell side saddle, now just waiting for the mag extender...

http://i119.photobucket.com/albums/o148/cumminsjason/Gun/GEDC1241_zps8dffb70a.jpg (http://s119.photobucket.com/user/cumminsjason/media/Gun/GEDC1241_zps8dffb70a.jpg.html)

http://i119.photobucket.com/albums/o148/cumminsjason/Gun/GEDC1232_zps07ec4848.jpg (http://s119.photobucket.com/user/cumminsjason/media/Gun/GEDC1232_zps07ec4848.jpg.html)

[jooos]

chr edw, not yet I ordered a +2 mag extender and was waiting to get that on before I clamp in on for good and I found a surefire tail replacement for the G2 that is on a pressure switch so I have some more tinkering to do, but I was going to use some Loctite blue 242 on the screws once I get her setup the way I want.

[M1A Shooter]

My mossberg is currently under construction. i got an 8-shot persuader last year. first stage was to take the pistol grip off and replace with a shockwave raptor birdshead and remove the heat shield. second stage is a tac-star 6 shell sidesaddle and a fixed factory buttstock.

my plans in the near future include stippling the grips and adding a set of 590 ghost ring sights. will also add an elzetta light mount and, at the moment, im thinking a Fenix LD-20 light in the mount - gotta be a AA powered light.

anyway, here are some pics of the progress.

http://www.executivegunrunners.com/images/product/image.php?s=1&id=46368

http://i220.photobucket.com/albums/dd68/Broylz/SU1BRzAzMTAuanBn.jpg

http://i220.photobucket.com/albums/dd68/Broylz/1366768795_zps32a29bc6.jpg

http://i220.photobucket.com/albums/dd68/Broylz/1366768588_zpsea1e6cfc.jpg

[M1A Shooter]

Stippled the grip on the stock yesterday. will be trying something on the forend soon, just gotta get through finals week first though :(

http://i220.photobucket.com/albums/dd68/Broylz/1367442822_zps11639d11.jpg

today, i put an elastic butt cuff on it with 5 rifled slugs and replaced the two slugs in the sidesaddle with 00 buckshot. also put a basic nylon 1.25" sling on it and ordered an Elzetta ZSM light mount to put a fenix ld-10 light in for now. im hoping the LD-10 will hold up until i can get another light rated for the recoil, but researching AA battery powered options. Will add another pic when the light is on.

Last piece of this build will be a set of Mossberg ghost ring sights from the 590a1 series, maybe a set of SPX sights depending on the price difference. Ordering these direct from Mossberg and installing them myself.

[Delmonte67]

http://i388.photobucket.com/albums/oo321/delmonte67/20130123_121424.jpg Old Mossy 500 with 18 inch barrel.

[Angry Fist]

http://i388.photobucket.com/albums/oo321/delmonte67/20130123_121424.jpg Old Mossy 500 with 18 inch barrel.
What foregrip is that on the Mossberg? Cool.

[Delmonte67]

What foregrip is that on the Mossberg? Cool.
Thanks,
I'm almost positive its a Mako, I liked it because it has 2 picatinny rails on each side and 1 on the bottom for a flashlight holder ect...

[eleven87]

11-87 SuperMag "Fun Gun" and the HD/BD Mossberg 500. (BD= Bear Defense.)
http://farm9.staticflickr.com/8559/8704095326_916418cdc9_c.jpg
http://farm9.staticflickr.com/8390/8676638727_f96fa315a5_z.jpg
http://farm9.staticflickr.com/8264/8676630025_3c556a0e5a_z.jpg
11-87 has a sidesaddle and 10 rd DMW tube, and a DMW Easyloader and a Nordic clamp in the box waiting to be fitted.
500 has an aftermarket railed forend, sidesaddle and 5 round elastic buttstock shellholder. It had a pistol grip when I got it and I scrounged up some nice wood furniture, but I haven't gotten around to putting the wood forend on because I kind of like the mismatched look.

[eyelikeglasses]

If you need a red dot or Eotech for your HD shotty your in over your head

And if you call your shotgun a "shotty", you are definitely in over your head.:wavey:

[NewtoConsulting]

I've owned a shotgun since my dad gave me a Winchester Model 37A for my first Christmas. This Remington 870 was the first shotgun that I bought myself.

I added the Allen shell holder and Quake Industries "The Claw" sling. It was slim pickings at Bass Pro Shop when I went shopping.

http://i1199.photobucket.com/albums/aa463/edbell1976/Rem870_zps9e531b8a.jpg (http://s1199.photobucket.com/user/edbell1976/media/Rem870_zps9e531b8a.jpg.html)

[M1A Shooter]

got the sling mounted along with a light mount from Elzetta. i also mounted an elastic butt cuff and filled it with slugs and the side saddle is now full of 00 buck along with the magazine. definitely need to get a longer sling as this one is maxed out already.

http://i220.photobucket.com/albums/dd68/Broylz/1367977810_zps214bc9f6.jpg

http://i220.photobucket.com/albums/dd68/Broylz/1367977632_zpsde503c26.png

[chr_edw]

How do you like the light mount m1a

Sent from my SGH-T959V using Tapatalk 2

[MStarmer]

Was looking for a 870P with the Wilson/XS combo at my local dealer. Didn't have any in stock but pulled this 24899 (polished blue 870P) out of the back. Just too nice to leave there, maybe I'll have ghost rings installed on my parked 870P when I get it back from Remington. This one is perfect just the way it is.

http://i245.photobucket.com/albums/gg68/mstarmer/20130513-DSC_1426-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130513-DSC_1426-2.jpg.html)
http://i245.photobucket.com/albums/gg68/mstarmer/20130513-DSC_1427-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130513-DSC_1427-2.jpg.html)

[W30]

Mossberg 14" Compact #50686. DOB: 7/97

http://oldz442.com/images/misc/guns/mossberg/590.jpg

http://oldz442.com/images/misc/guns/mossberg/DSC03005.JPG

http://oldz442.com/images/misc/guns/mossberg/DSC02712.JPG

http://oldz442.com/images/misc/guns/mossberg/DSC02865-1.JPG

[Inebriated]

Was looking for a 870P with the Wilson/XS combo at my local dealer. Didn't have any in stock but pulled this 24899 (polished blue 870P) out of the back. Just too nice to leave there, maybe I'll have ghost rings installed on my parked 870P when I get it back from Remington. This one is perfect just the way it is.

http://i245.photobucket.com/albums/gg68/mstarmer/20130513-DSC_1426-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130513-DSC_1426-2.jpg.html)
http://i245.photobucket.com/albums/gg68/mstarmer/20130513-DSC_1427-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130513-DSC_1427-2.jpg.html)
Gorgeous.

[MStarmer]

Mossberg 14" Compact #50686. DOB: 7/97

W30 That thing is BAD ***** :rock:

[eleven87]

W30 That thing is BAD ***** :rock:
^^
This

[M1A Shooter]

How do you like the light mount m1a

Sent from my SGH-T959V using Tapatalk 2


I went to the range on Saturday and shot it with my dad. we were there mostly to work out some issues with his makarov and i forgot my box of target shells so we put a total of only 14 rounds of remington express 00 buckshot through it.

light mount held up great. i actually put it on too tight and had issues getting the magazine to cycle rounds. backed it off a 1/4 turn on a couple screws and it runs great.

i will need to get a better dedicated weapons light for it soon. the fenix will do in a pinch. i turned the light on when my dad fired off a mag full of rounds and i didnt check it between rounds but when he finished, it was strobing so the recooil was stout enough to cycle the modes at least once.

will be worth the $40 if it ever saves the life of a family member or myself. i just wont shoot it when turned on too much and make sure to check it out after the range trips.

anyone have any ideas on a AA powered light that can take this kind of abuse?

[MStarmer]

anyone have any ideas on a AA powered light that can take this kind of abuse?

I think you are going to be hard pressed to find a AA light that is stout enough to take that kind of punishment. I think the minimum standard would be one of the Streamlight TLR's, they're cheap and they work (and available in AA). For personally when talking about the safety of my family, the lights on my guns are Surefire. Yes they are expensive but I amortize that expense by the extremely long time I have the lights. I've had several streamlight/insights products come and go but I bet I have every surefire light I've ever bought less one or two that were sold / traded to fund an upgrade. Buy a great light and you can move it around from gun to gun or as your needs change.

http://www.insighttechnology.com/l3-products/wl1-aa-led

[jb1911]

http://farm3.staticflickr.com/2845/8752240514_4586d51d03_b.jpg

[jb1911]

Was looking for a 870P with the Wilson/XS combo at my local dealer. Didn't have any in stock but pulled this 24899 (polished blue 870P) out of the back. Just too nice to leave there, maybe I'll have ghost rings installed on my parked 870P when I get it back from Remington. This one is perfect just the way it is.

http://i245.photobucket.com/albums/gg68/mstarmer/20130513-DSC_1426-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130513-DSC_1426-2.jpg.html)
http://i245.photobucket.com/albums/gg68/mstarmer/20130513-DSC_1427-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130513-DSC_1427-2.jpg.html)
She's a beauty!

[M1A Shooter]

I think you are going to be hard pressed to find a AA light that is stout enough to take that kind of punishment. I think the minimum standard would be one of the Streamlight TLR's, they're cheap and they work (and available in AA). For personally when talking about the safety of my family, the lights on my guns are Surefire. Yes they are expensive but I amortize that expense by the extremely long time I have the lights. I've had several streamlight/insights products come and go but I bet I have every surefire light I've ever bought less one or two that were sold / traded to fund an upgrade. Buy a great light and you can move it around from gun to gun or as your needs change.

http://www.insighttechnology.com/l3-products/wl1-aa-led

That is the same light I keep on my glock 17 now. I am saving up for a couple more, 1 for the shotgun and 1 for the ar15. Just keep looking for other options as well. I'm probably limiting myself on the batteries but I stock more of them and they are the cheaper option as well. WL1 is a great light btw. :thumbsup:

[Mike Bell]

Here is my Remington 1100, but I still have a few things to add then reblue.
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/936748_3156635612470_1631228373_n.jpg

[CDR_Glock]

http://img.tapatalk.com/d/13/05/26/gyqegu2a.jpg

http://img.tapatalk.com/d/13/05/26/a7a8uryg.jpg

http://img.tapatalk.com/d/13/05/26/paqedyge.jpg

http://img.tapatalk.com/d/13/05/26/hade2y8a.jpg

http://img.tapatalk.com/d/13/05/26/ame8epa8.jpg

Benelli M2 Tactical 18.5" Comfort Tech Stock
VMW extension (7+1), Tube Clamp (not installed on pics), Extended Bolt release
GG&G Mag follower, Quick release front and back sling mounts
Vickers Blue Force 2 point sling
Mesa Tactical 6 shell carrier and mount
Limbsaver 10401
Freedom Fighter Tactical Forend

[Don H]

Was looking for a 870P with the Wilson/XS combo at my local dealer. Didn't have any in stock but pulled this 24899 (polished blue 870P) out of the back. Just too nice to leave there, maybe I'll have ghost rings installed on my parked 870P when I get it back from Remington. This one is perfect just the way it is.

http://i245.photobucket.com/albums/gg68/mstarmer/20130513-DSC_1426-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130513-DSC_1426-2.jpg.html)
http://i245.photobucket.com/albums/gg68/mstarmer/20130513-DSC_1427-2.jpg (http://s245.photobucket.com/user/mstarmer/media/20130513-DSC_1427-2.jpg.html)

:thumbsup:

[Bulldog160]

Mossberg 500

233558


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

[CajunJosh]

The new baby

http://www.glocktalk.com/forums/picture.php?albumid=1808&pictureid=6507

[nosuchagency]

http://i82.photobucket.com/albums/j245/bcnoda/IMG_0387_zps0ce79862.jpg

[mr00jimbo]

All stock 870 Police Magnum with walnut (a new picture i quite like)
http://imageshack.us/a/img62/9580/015qyq.jpg

[MStarmer]

mr00jimbo I used LR and bumped your exposure a couple of stops to make the gun a bit more visible. Great looking gun, I have two of them... :)

http://i245.photobucket.com/albums/gg68/mstarmer/mr00jimbo-2.jpg (http://s245.photobucket.com/user/mstarmer/media/mr00jimbo-2.jpg.html)

[eyelikeglasses]

http://i388.photobucket.com/albums/oo321/delmonte67/20130123_121424.jpg Old Mossy 500 with 18 inch barrel.

Sweet bro! Get a Remy! Get a Norcy, or a Winny, best Shottys ever yo.:upeyes:

[MStarmer]

http://i82.photobucket.com/albums/j245/bcnoda/IMG_0387_zps0ce79862.jpg

Wow, awesome looking. Box might be a little over the top though...

[mr00jimbo]

mr00jimbo I used LR and bumped your exposure a couple of stops to make the gun a bit more visible. Great looking gun, I have two of them... :)

http://i245.photobucket.com/albums/gg68/mstarmer/mr00jimbo-2.jpg (http://s245.photobucket.com/user/mstarmer/media/mr00jimbo-2.jpg.html)

Thank-you! That looks great. :)

[Riverkilt]

Bag its on looks like one of Saddleback Leathers....?

Was out on the Navajo reservation a few weeks ago and stopped in to a small gun shop and came home with this Mossberg M590A1 complete with bayonet.

http://i237.photobucket.com/albums/ff147/riverkilt/Z%20Kilted%20Concealed%20Carry/002_zps6c79b57a.jpg (http://s237.photobucket.com/user/riverkilt/media/Z%20Kilted%20Concealed%20Carry/002_zps6c79b57a.jpg.html)

Bought it for home defense. Here's the pattern at 20 feet. All nine 00 buck in a three inch diameter pattern. Winchester Ranger.

http://i237.photobucket.com/albums/ff147/riverkilt/Z%20Kilted%20Concealed%20Carry/Win_zps1141c489.jpg (http://s237.photobucket.com/user/riverkilt/media/Z%20Kilted%20Concealed%20Carry/Win_zps1141c489.jpg.html)

Big hole on the left is the wads.

[SouthpawG26]

The new baby

http://www.glocktalk.com/forums/picture.php?albumid=1808&pictureid=6507

:wow: awesome!

[n2wishn]

233840


Sent from my iPhone using Tapatalk