What are the plus sides of the M&P vs glock and XD [Archive] - Glock Talk

PDA

View Full Version : What are the plus sides of the M&P vs glock and XD


glockbanger
01-10-2009, 01:36
What are the plus sides of M&P vs glock and XD? What are the cons too. Thanks!

RH45
01-10-2009, 06:15
What are the plus sides of M&P vs glock and XD? What are the cons too. Thanks!

#1 plus--made in the USA

#2 plus--S&W supports the shooting sports (donates prizes for prize tables)

GRR
01-10-2009, 07:29
Plus side? Absoulutly none for me. Same for the XD

Con? Grip angle, sigma trigger, complexity of internals, higher bore axis, availability of parts, harder to work on, and so on. Same for the XD.

hakuin
01-10-2009, 23:26
My comparison was between the G27/33 vs M&P 9c model for concealed carry.

I prefer the ergonomics of the M&P over my micro Glock. I happen to think the slightly larger size of the 9c is not a disadvantage.

Just what feels right to me... (so much so, that I purchased a 357c to replace the Glock).

RH45
01-11-2009, 06:24
I have a 19, 34, and a 35, all of which have had the triggers modified. Over the years, I've used them all in IDPA, and USPSA matches, and they have run 100%.

Over a year ago, I ended up with a full-size, .40 M&P. I didn't like the trigger pull, so I did a little work on it per Dan Burwell's website, and took it out to my local range with some "minor" loads. Although I was really impressed that it would run my "gamer" loads right out of the box, I wasn't real happy with the accuracy.

I picked up a holster for it, and FINALLY decided to take it to the range and run some drills with it, against my Glock 35. I was shocked to find out that the timer was showing me I was faster with the M&P every drill I shot, And I was more accurate!

I couldn't believe that I could shoot better with the M&P, compared to my old Glocks so I went to a local IDPA match last week, and won the match!

I'm not saying that either pistol is BETTER than the other. Selecting and shooting a pistol should always be what feels the best, and shoots the best for YOU!

MSgt Dotson
01-11-2009, 09:34
The M&P feels very nice in the hand, more rounded, ergonomic...with interchangeable backstraps, it can be made to fit a variety of hand sizes.

The GLock fits well, but, the M&P just 'feels better'....

FiremanMike
01-12-2009, 06:37
Plus side? Absoulutly none for me. Same for the XD

Con? Grip angle, sigma trigger, complexity of internals, higher bore axis, availability of parts, harder to work on, and so on. Same for the XD.

Have you ever actually seen an M&P?

GRR
01-12-2009, 06:52
Have you ever actually seen an M&P?
Wouldn't have made the comment otherwise. Will say that the last one I shot (owned by the local S&W rep) had been worked on and had a nicer trigger than normal. He had sent it off to a 3rd party smith. Still not as nice as a Joe D trigger job on a Glock.

FiremanMike
01-12-2009, 07:34
How can you say it's harder to work on and more complicated than a glock, they have essentially the same internals with their own brand flavor?

GRR
01-12-2009, 18:07
How can you say it's harder to work on and more complicated than a glock, they have essentially the same internals with their own brand flavor?


Well, the Glock has a trigger bar, trigger mechanism housing, connector and trigger spring. The S&W has a trigger bar, sear housing block (consisting of a seperate ejector, sear spring, sear spring plunger, and sear). To noticably improve the trigger on a Glock, you replace the connector and do a $.25 polish job taking about 10 minutes. To improve the trigger on a S&W you take the sear housing block apart, lock the sear in a vice and file, stone, and polish, test fit, repeat. Sounds more complicated to me. Also, to remove the firing pin safety on the Glock you remove the slide back plate, remove the firing pin and extractor depressor plunger assembly and the extractor and the firing pin safety falls out. To remove the firing pin safety (firing pin block) from a S&W you have to remove the rear sight!

More complex and harder to work on. And its put together with (shudder) roll pins.

RH45
01-12-2009, 18:46
Well, the Glock has a trigger bar, trigger mechanism housing, connector and trigger spring. The S&W has a trigger bar, sear housing block (consisting of a seperate ejector, sear spring, sear spring plunger, and sear). To noticably improve the trigger on a Glock, you replace the connector and do a $.25 polish job taking about 10 minutes. To improve the trigger on a S&W you take the sear housing block apart, lock the sear in a vice and file, stone, and polish, test fit, repeat. Sounds more complicated to me. Also, to remove the firing pin safety on the Glock you remove the slide back plate, remove the firing pin and extractor depressor plunger assembly and the extractor and the firing pin safety falls out. To remove the firing pin safety (firing pin block) from a S&W you have to remove the rear sight!

More complex and harder to work on. And its put together with (shudder) roll pins.

Yes, I would have to agree that having to remove the rear sight is stupid.:wow:

writwing
01-25-2009, 11:17
Plus side? Absoulutly none for me. Same for the XD

Con? Grip angle, sigma trigger, complexity of internals, higher bore axis, availability of parts, harder to work on, and so on. Same for the XD.

This is what consistantly brings me back to Glock.

walkin' trails
01-30-2009, 17:09
I've been a hardcore Glock guy since 1987 when I bought my 17 and still have it. I still carry and shoot my Glocks, and love them. That said, I had the chance to fire a full sized M&P 40 a while back and liked it. I even thought that my follow up shots were faster than with a Glock. I didn't notice any major differences in trigger press or reset, even though the guy who let me shoot it complained that he could not feel the reset. I am seriously thinking that I have to add the M&P45 mid frame to my collection. I grew up with S&W revolvers and always wanted S&W to have a successful line of autoloaders. I did not care for any duty-type auto loader they produced (even the legendary 645 which developed a reputation for working reliably and consistently). I'm very glad S&W has a hit on their hands. I won't be getting rid of my Glocks, but unless S&W's quality control goes down the toilet again, or they sign another pact with the anti-gun lords of the sewers, I will give them support again.

That said, the only down side to the new Smiths is that the magazines are something like $41 a piece.

RH45
01-30-2009, 17:51
I've been a hardcore Glock guy since 1987 when I bought my 17 and still have it. I still carry and shoot my Glocks, and love them. That said, I had the chance to fire a full sized M&P 40 a while back and liked it. I even thought that my follow up shots were faster than with a Glock. I didn't notice any major differences in trigger press or reset, even though the guy who let me shoot it complained that he could not feel the reset. I am seriously thinking that I have to add the M&P45 mid frame to my collection. I grew up with S&W revolvers and always wanted S&W to have a successful line of autoloaders. I did not care for any duty-type auto loader they produced (even the legendary 645 which developed a reputation for working reliably and consistently). I'm very glad S&W has a hit on their hands. I won't be getting rid of my Glocks, but unless S&W's quality control goes down the toilet again, or they sign another pact with the anti-gun lords of the sewers, I will give them support again.

That said, the only down side to the new Smiths is that the magazines are something like $41 a piece.

Anybody that pays even close to that for mags, isn't looking around too hard!:rofl:

walkin' trails
01-30-2009, 22:00
Anybody that pays even close to that for mags, isn't looking around too hard!:rofl:

I haven't really started looking that hard as of yet. The prices I've been quoted come from a shop in my area that just started distributing the line, and from the S&W website. What are you seeing them priced at, and where?

TexasPOff
02-01-2009, 09:37
I was actually considering purchasing an M&P 40 to use a duty pistol. The M&P fits my hand a bit better than my G23. Ergos in general are good on the M&P. The reason im not switching right now is simply the M&P doesn't have the track record of reliablity the Glock has. Yes Im sure the Glock had growing pains as well during it's introduction. If would have been an officer then, I wouldn't have carryied a Glock during that time either. I carry this on and off duty, and do not want to chance any reliablity issue. When M&P has had several years under its belt and continuesto be a reliable and durable pistol, then I would have no problems carrying one. The M&P is an excellent pistol with a very bright future. I think most of the issues with it have been resolved from what I have read. In a few years who knows. Then again in that few years Glock might come out with a true user friendly frame redesign.

hakuin
02-01-2009, 11:48
I was issued my first service Glock in 1988 (when they didn't have a long track-record) and it worked out fine. I'm on my third variant of the Glock as a work-gun now. I carry an M&P compact 9mm (until I can qualify with my 357c, that is) for off-duty, and feel very confident in it's design and function.
My advice would be to get the M&P you feel best-addresses your needs and shoot the Dickens out of it. Should give you that all-important first-hand experience with that particular pistol. As a group, I find the improvements made by Smith in the M&P's only enhance my confidence. Don't wait too long for "common acceptance", or you'll regret doing without in the interim (my experience in past scenarios, anyway).

jhayesvw
01-13-2010, 13:34
anyone else want to chime in?

im selling my G19 to get a full size gun for IDPA and USPSA stuff.

my G19 has served me well, but i want a full size now.
i cant decide between a G17 or a M&P9.

i like that the G17 is a glock and im pretty used to them. theyre also easy to modify and work on.
i dont like that the glock "shouldnt" be shot with lead reloads.

the M&P is the same capacity, same weight (about) and is very reliable too
it shoots lead with the stock barrel also.
however, i dont like that its more complex to get the trigger weight down and i cant get extended slide and mag releases on it that keep me in SSP (stock service pistol class).

what do you guys think?
also, hows the recoil compare. im going to borrow my friends 17 and another friend m&P9 to compare this weekend at the USPSA match and i will post up what i think.

GT40
01-16-2010, 21:49
What are the plus sides of M&P vs glock and XD? What are the cons too. Thanks!

If the M&P had come into the market at the same time as the Glock, and both companies used the same marketing programs, by now, the question would be, Glock who?

As for the XD, it's dead last in this race as it brings nothing to the table to compete with the M&P.

Linux3
01-17-2010, 13:57
anyone else want to chime in?

im selling my G19 to get a full size gun for IDPA and USPSA stuff.

my G19 has served me well, but i want a full size now.
i cant decide between a G17 or a M&P9.

i like that the G17 is a glock and im pretty used to them. theyre also easy to modify and work on.
i dont like that the glock "shouldnt" be shot with lead reloads.

the M&P is the same capacity, same weight (about) and is very reliable too
it shoots lead with the stock barrel also.
however, i dont like that its more complex to get the trigger weight down and i cant get extended slide and mag releases on it that keep me in SSP (stock service pistol class).

what do you guys think?
also, hows the recoil compare. im going to borrow my friends 17 and another friend m&P9 to compare this weekend at the USPSA match and i will post up what i think.

I shoot SSP or Production, depending on IDPA or USPSA.
I started with a M&P 9MM Full size and now have a M&P 9 Pro. I really like the M&P with the small grip.
The Pro..... Awesome, just awesome. The 5" barrel helps and I find I like the stock green fiber front sight with a plan black rear.
The trigger is very smooth and light and I like the "click" and feel when it resets. Sure you can get trigger jobs on Glocks but then they are not SSP.

I don't know about XD's, I never shot one. I can't hit the floor with a Glock, the ergos are just wrong FOR ME. No flame wars here please.

My Smiths have never let me down through a couple of years of USPSA, IDPA, DSM and more. Just today, after a perfect score on a IDPA stage the RO said "I don't know what you paid for that new Smith, but it was worth it". And it is.

GRR
01-17-2010, 15:15
[QUOTE=Linux3;14563601]Sure you can get trigger jobs on Glocks but then they are not SSP.

QUOTE]

A trigger job on a Glock does not take you out of SSP.

82ndVet
01-17-2010, 16:16
Which would you prefer...

USDA Grade A Steak - M&P :patriot:

or

Spam and Soy -glock and xd

:whistling:

ecmills
01-24-2010, 21:00
I spent the last two years shooting the Glock. Won first place in SSP Master at Missouri, Arkansas, and a couple of non-state-championship matches somewhere during the year with it.

I switched to the M&P 9L I am shooting now for a chance to pick up a sponsorship from Team Smith & Wesson. Didn't think there'd be much difference between the guns. But there's no question that I am shooting better with the M&P.

I am not switching back.

The gun does have some quirks (mine REQUIRES ammo loaded short - 1.115" - if I want to run 147s) and I had to fit a Speed Shooter extractor and respring the gun before it would run at 130PF. It is not as idiot-proof as the Glock was.

ecmills
01-24-2010, 21:06
Magazines are $17 at www.******.com

This company has hundreds of complaints against them at the BBB. I waited over six months for a belt that was backordered. Be careful.

But if mags are in stock, they ship right away. Mine arrived 9 days after being ordered (and I've gotten Glock mags cheap/fast there as well). Just don't order anything but mags.

Billet
02-14-2010, 10:54
Comparing the M&P 9c to a G26, I found the M&P to have a grip angle that is more like my other pistols, better ergonomics, and higher capacity (12 vs 10) when the shortest and most concealable magazine is used. The M&P also came with an extended magazine, more conventional 3-dot sights, and ambi safeties (personal preference). The difference in size was negligible.

garand4life
02-14-2010, 11:16
My M&P40 was made at the onset of production. I didn't like the slide stop lever because it, like Glock, went for extremely low profile. Making it hard to operate under stress. S&W completely reworked the gun for free at the factory back at Christmas and now it is just incredible. Shoots very accurate, feeds anything I have found to put through it and the grip, as others have said, just feels good. So much so I just bought a M&P9c and to me nothing feels quite like it. Soft shooter with a good trigger. I am however in agreement with a lot of users that the trigger is too spongey. I am going to have the Performance Center do an action job before I start using it in IDPA. Replacing the sear with a performance model and tightening up the action a bit more. I am a Glock fan as well. I just bought a 23 in OD and love it as well. But, I don't find it a refined in feel and function. But time has proven it reliable the world around. The small grip oddly feels very thin for an almost 1911 feel. Plus it has been tested in the field with ten of thousands of rounds with minimal failure. Even after cracking the slide it was deemed safe by the factory and has not suffered any drop in performance quality. THe magazines I find are easier to load with the full compliment of ammo and hold up well to abuse. So all in all I think comments about the M&P "having a Sigma trigger" are basically dimwits who have never touched the gun trash talking only to propel their choice gun to a higher position. I like my Glock and I would never give it up. But in a pinch I feel better armed with an M&P for the reasons I just mentioned. Built tough and built American and absolutely built to my hand.