Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   Rimfire Forum (http://glocktalk.com/forums/forumdisplay.php?f=61)
-   -   Suppressor Host (http://glocktalk.com/forums/showthread.php?t=1186596)

Liquid 02-18-2010 20:26

Suppressor Host
 
I should be able to pick up my Spectre in about a week or so. I currently have a walther p22 but I am not to thrilled with the reliability of it. Every other mag jams and I have to manually rack the slide. I would want to stay south of $500.

Thanks,

liquid

DJ Niner 02-18-2010 23:21

Browning Buckmark? Could either have the original barrel threaded, or get a drop-in replacement already good-to-go for a can.

batoncolle 02-19-2010 17:00

Browning Buckmark with a TacSol Barrel is what I use, and it's very reliable.

http://i203.photobucket.com/albums/a...8/Buckmark.jpg

Liquid 02-19-2010 18:42

that looks pretty neat. i will look for some more information on them.

chrismartin 02-19-2010 18:50

I LOVE my buckmark. I found mine at a Pawn shop for $200 and added the tac sol barrel mentioned above. Total cost was less than $500.
Another great choice would be a Ruger Mark 2 or 3 especially the 22/45 series (The 22/45 has a grip angle like a 1911, whereas the normal Rugers have more of a glock cant) You will have to send it away to get threaded properly. The Tacsol threaded barrels for the Ruger are serialized parts and you have to transfer through an FFL (The Ruger uses the top half as the serialized receiver.) so it will end up being expensive.

You can also get some good use out of a CZ Kadet for a full sized, combat style pistol.

Don't forget to check out the Advantage Arms .22 conversions for the Glock frames.

My most favorite pistol is my Marvel 1911 in .22lr. It's amazing.

The Ruger will be the most quiet though as it has a small ejection port. I don't know if you could really hear the difference, but shooting it side-by-side with the Buckmark I could tell.

Liquid 02-19-2010 19:56

i rather not go with the converion kits. i take it the tac sol barrel cost around $300?
for the price i like the looks of this one
http://www.impactguns.com/store/023614067085.html

batoncolle 02-20-2010 07:13

Yes I forgot about the Whisper, and I have read good reviews on it although I have personally never seen one. The advantage to the TacSol barrel is the lighter weight. It really makes for a nicely balanced handgun on the Buckmark. If you're still interested in one, check around and you should find them from vendors under $300. But if you can find a Whisper, I think that would be an excellent buy as well. You also have the option of sending off a barrel to get it threaded.

CSNeoM4A1 02-21-2010 16:14

I use a .22 browning buckmark with my spectre. I put a tac sol barrel on it and sold the original on gunbroker. It has been working out like a dream. I love it.

98_1LE 02-21-2010 19:21

I vote for a Ruger, and send it to CPC for threading.

<3 my 22/45's.

DaScotsman 02-21-2010 21:53

Before you give up on the P22, I've read online where some of the older mags had problems like this...

Also, what are you shooting? I know mine hates Wildcat...

As long as I keep it clean, mine eats Winchester and Remington subsonic with no fuss... with a suppressor, the P22 is as silent as you'll find.

DriBak 02-22-2010 16:16

Interested in selling your P22

Liquid 02-22-2010 19:31

batoncolle are the can and the barrel the same diameter?

dribak i am not looking to sell

T. Harless 02-23-2010 13:54

Ruger MK III, AAC Pilot and a Tac Sol upper. Great setup

http://i458.photobucket.com/albums/q...ess1/MKIII.jpg

batoncolle 02-23-2010 18:53

Quote:

Originally Posted by Liquid (Post 14811239)
batoncolle are the can and the barrel the same diameter?

The can is slightly (maybe 1/8") larger. It's an AA Prodigy.

nnickatnight 02-23-2010 19:05

Mines a Yankee Hill on a Ruger 22/45 with a Paclite Upper. Shoots anything with no problems. My original host was perhaps the Walther's Nemesis, the Sig Mosquito. The pistol was also horrible I was happy to be rid of it.

T. Harless 02-23-2010 19:17

Quote:

Originally Posted by nnickatnight (Post 14817670)
....My original host was perhaps the Walther's Nemesis, the Sig Mosquito. The pistol was also horrible I was happy to be rid of it.

I really wanted to like the Sig but I'd not heard one good word about it. I've had no really issues with Ruger. It's more fun to shoot subsonic with the suppressor, just for the Hollywood quiet, but I will get a FTE from time to time. Full power stuff, even golden bullets, I've no trouble.

ronin.45 02-23-2010 19:20

I have a stainless bull barrel Ruger MkII that I sent to JPGrips.com.
He did an excellent job and his turn around time was like three days. His price is also very reasonable. He runs threading auctions on Gunbroker.
I like this setup because it leaves all functional parts of the gun stock. I never trust changing parts on a gun that runs well to begin with.

CitizenOfDreams 02-23-2010 20:27

How well would a Beretta Neos work for a suppressor host (not hijacking the thread, just giving it a spin)?

T. Harless 02-23-2010 21:02

Quote:

Originally Posted by CitizenOfDreams (Post 14818257)
How well would a Beretta Neos work for a suppressor host (not hijacking the thread, just giving it a spin)?

I actually forgot I have one of those. Trippy little gun and cheap enough. Controls all funky. Space age looking and would look wicked with a suppressor. I see a project.

sgtglock 02-24-2010 12:54

My CZ75 tactical with a Kadet upper is great for a suppressor host. It is accurate and very reliable. I also built the 22/45 with a Tac-Sol packlite upper that is pictured with the Kadet. I also have a P-22 that works but doesn't get much use since I put these two together.
http://img.photobucket.com/albums/v5...k/IMG_2648.jpg


All times are GMT -6. The time now is 04:20.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.