Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   GATE Glock Pistol Forum (http://glocktalk.com/forums/forumdisplay.php?f=247)
-   -   Can you put a G19 slide assembly on a... (http://glocktalk.com/forums/showthread.php?t=1362914)

bafsu92 08-15-2011 08:49

Can you put a G19 slide assembly on a...
 
G17 frame, essentially creating a commander style Glock? Sorry if this has been discussed but I'm kind of new to this forum. I'd thought about this in the past but never at a time when I had both a 17 and 19 at the same time to try it.

JR 08-15-2011 10:42

You can not put a 19 slide onto a 17 frame. The frame would stick out poast the slide and the locking lug is different anyway.
LWD has a conversion adapter (dust cover) that allows you to put the G17 slide (or longer) on top of a G19 frame. See the XL series info here http://bit.ly/pHfcrq

bafsu92 08-15-2011 16:22

I figured that was the case on the frame length, I was prepared to modify that. It's the locking lug part that I was really questioning and you answered that for me. Thanks for the info, I'll check out that link.

JR 08-15-2011 21:42

If you want to modify the dust cover of the frame then you could do this project. All you need to do is install the 19 slide, chop the 17 barrel to fit the 19 slide or maybe have it 2 ported like this? http://bit.ly/qfxUsF and then trim the dust cover to fit the slide.

If you proceed I would like to see the pics


All times are GMT -6. The time now is 16:09.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.