Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   The .40 S&W Club (http://glocktalk.com/forums/forumdisplay.php?f=35)
-   -   loading .40 S&W hard cast hot loads (http://glocktalk.com/forums/showthread.php?t=1371374)

g29guy 09-23-2011 23:09

loading .40 S&W hard cast hot loads
 
I've loaded some 155 grain swc and 180 grain tcfp hard cast in .40 s&W for general plinking at 6.5 grains power pistol.

I'm new to the .40 reloading scene, but am familiar with loading 10mm.

The only load data I can get for power pistol for lead is :

2005 Alliant loading manual

Laser cast 155 grain lead bullet, 1.125 oal, 7.0 grain pp, win primer
laser cast 180 grain lead bullet, 1.125 oal, 6.9 grain pp, win primer

Are these regular cast lead bullets or are they alloy hard cast bullets?

The bullets I'm loading have2-6-92 hard casting alloy (BHN 17) and premium lube.

I would like to load some hot loads using these two bullets. Does anyone have any experience working up .40 with hard cast using Blue Dot or Power Pistol?

In the 10mm iv'e found that I can load Hard Cast ammo to maximum published load data for speer gold dot hollow points without any pressure signs am I okay to load the same with the .40? I start 10% from max and shoot strings of 10 all the way up examining brass after each string.

I will be shooting these loads out of a 4.75" kkm conversion 10-.40 barrel out of a glock 29.

Im not looking to push the limit, as i do shoot 10mm, but would like to know what the limit is for safety and confidence.

Any feedback to save some time would be appreciated:cool:

_The_Shadow 09-27-2011 12:46

I use a load of 8.4 grains of Blue Dot with my Lyman 175 grain TC BB cast 0.401" with CCI550, 1.125", Rooster Labs Zambini lube @ 1070 fps from my S&W 1006 5" Bar-Sto conversion, from the Glock 29 StormLake 3.78" barrel 1040 fps.

I also cast a Lyman Devastator 156 grain HP...
S&W 1006 with Bar-Sto 40S&W barrel 5.00”<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Temps 99 <o:p></o:p>
Lyman 156.0 gr Devastator HP 0.401” 1.125”<o:p></o:p>
Power Pistol 7.2 gr CCI 550<o:p></o:p>
Velocity 1171-1287 fps
<o:p></o:p>
Glock with Storm Lake 40S&W barrel 3.78”<o:p></o:p>
Temps 99 <o:p></o:p>
Lyman 156.0 gr Devastator HP 0.401” 1.125”<o:p></o:p>
Power Pistol 7.2 gr CCI 550<o:p></o:p>
Velocity 1102-1235 fps<o:p></o:p>

g29guy 09-27-2011 14:24

Thanks for the reply. Some of this cast info is hard to come by!


All times are GMT -6. The time now is 06:05.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.