Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   Military Surplus Forum (http://glocktalk.com/forums/forumdisplay.php?f=107)
-   -   What is this rifle? (http://glocktalk.com/forums/showthread.php?t=1415550)

Veedubklown 04-15-2012 22:51

What is this rifle?
 
I'm guessing it's old milsurp, but the bayonet lug, and bayonet. Anyway, I have no idea what this rifle is. My buddy asked if I could find a firing pin for it, he's missing more than than from the bolt. I also have no clue what it's chambered for, asside from a necked cartrige. There's very little stampings on this rifle, just the origional 4 didgit serial number.

Grabed a few pics, hoping the GT braintrust can help me figure it out.

http://i39.photobucket.com/albums/e1...-59-38_478.jpghttp://i39.photobucket.com/albums/e1...-01-23_779.jpghttp://i39.photobucket.com/albums/e1...-00-03_222.jpghttp://i39.photobucket.com/albums/e1...-00-11_189.jpghttp://i39.photobucket.com/albums/e1...-59-51_667.jpghttp://i39.photobucket.com/albums/e1...-00-41_909.jpg

What looks like a cleaning rod, is actually just about 4-6" long, and threaded on the end. No idea what it's for. The butt plate is just another piece of wood, I thought that was also weird. The whole rifle was odd, and I couldn't figure out what it was. Buddy says it may be an argentine mauser, but I saw nothing that would indicate that.

The block on the side of the action in pic 4 is the release for the bolt. Another thing I saw, odd. The bolt also sticks back to the rear when the magazine plate comes all the way up. There's a floorplate in front of the trigger group that releases with a small latch in front of the trigger.

countrygun 04-16-2012 01:16

Looks like a Japanese Arisaka from what I can see; It would likely be a 6.5 (,260) cal although it could be a later 7.7 (.303)



edit to add: look at the top of the reciever front ring. There shoould either be something resembling a Crysanthymum (flower) or the marks where one was ground off. If it hasn't been ground off that adds a lot of value

Veedubklown 04-16-2012 02:14

There is definitely an area on top of the receiver where it looks like it was ground off, and reblued. As I said, there's very little markings what-so-ever. I thought it looked too small to be what my friend thought (.30 cal), .260 sounds right.


After looking around, it's definately a type 99, 7.7x58 jap. Thanks for the help!

E-2-E 04-17-2012 12:40

Seems to be missing the safety knob as well, and I'm sure a firing pin spring. It also is a late war/ last ditch rifle. I was given a last ditch that was missing the above parts I mentioned, and I did buy the parts, but can't remember where. The markings after the serial# tell you what plant it was made in, IIRC.

Decguns 05-10-2012 18:06

It's a nice example of a last ditch Japanese type 99. Considering the poor quality of metals used by the Japanese at the end of the war, I wouldn't try to fire it. Hate to destroy a rather collectable piece of history.

You can find parts at SARCO Inc or Numrich Gun Parts (e-gunparts). There's no telling if proper type 99 parts will fit in the simplified bolt. Might want to buy an entire bolt assy just in case.

rhino673 05-10-2012 18:21

Quote:

Originally Posted by Decguns (Post 18951737)
It's a nice example of a last ditch Japanese type 99. Considering the poor quality of metals used by the Japanese at the end of the war, I wouldn't try to fire it. Hate to destroy a rather collectable piece of history. .

X2. Some of the really late war stuff is horrible quality. It seems like i read somewhere that the really late stuff didn't even have a magazine follower. I guess you have to keep in mind that some of the Japanese were preparing to fight off the Americans with spears and hand to hand combat.


All times are GMT -6. The time now is 23:03.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.