Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   General Firearms Forum (http://glocktalk.com/forums/forumdisplay.php?f=82)
-   -   365 days with Ruger SR9 (http://glocktalk.com/forums/showthread.php?t=1418805)

Nestor 05-01-2012 14:41

365 days with Ruger SR9
 
During the next year I'm going to share my impressions and experiences with Ruger SR9 - one that I've got recently.
Good or bad - I'm not really planning forward to be positive or negative about this pistol. I'm just wondering if this model can be a real alternative to the ever popular Glock 17 or S&W M&P 9. Only time will tell. I have to say that this, particular gun was pre-owned, but never fired before. After the initial inspection I have to agree with such statement. It came in the typical, Ruger plastic box supplied with the safety instructions, 2 magazines (pinned to 10 rounds thanks to the local regulations) and magazine loader (nothing fancy, but it works). It's the latest, so called 3rd generation (even though Ruger is not using such nomenclature) of the first ever, striker fired pistol made by this American company. Black slide on the black, polymer frame. Adjustable rear sights with the three dots system implemented. As we all are aware, Ruger is not afraid to go back to the drawing board and start fresh. That's exactly what happened with this pistol after it was introduced in 2007. I think that it's a good thing to see the company that is not afraid to admit that they made a mistake and fix it without trying to call the problem "upgrade" or blame the used ammo for the problems with the gun.
That's it for today. More details to come. Thanks!

http://img.photobucket.com/albums/v2...n/IMG_3494.jpg
http://img.photobucket.com/albums/v2...n/IMG_3495.jpg

unit1069 05-01-2012 14:50

I look forward to your progress reports.

itstime 05-01-2012 15:00

I will look forward to it.

Folsom_Prison 05-01-2012 15:14

Looking forward to it Nestor!

M2 Carbine 05-01-2012 15:43

Hi Adam.:wavey:

I like my SR9/40C Rugers. They are good guns.
http://i1183.photobucket.com/albums/.../SR9Claser.jpg

That sucks having only low cap magazines.

I think you will enjoy the gun.

Nestor 05-01-2012 16:37

Yes Buck, limited capacity is one of our problems here, up North (10 for the pistols, 5 for the semi-auto rifles - with some exceptions). We also can't carry (except for a very few of us, professionally involved in some "dangerous" activities on daily basis). We just scrapped the so-called long gun registry, so there is slow improvement, but nowhere near Texas laws for sure :)
Anyway back to the topic, Ruger SR9 is less expensive pistol than the models offered by the competing companies (at least here) by about $150-190 - which for many people is a lot of money. As already mentioned the original model was recalled very soon after it was introduced. Ruger installed the new trigger assembly very Glock-like in appearance, but nothing as nice in terms of trigger pull. Owners were still complaining about heavy, gritty trigger pull, sticky magazine release button that could render the gun to be inoperable and fixed sights. To answer those complains Ruger made another modifications implementing the trigger group taken from the compact models along with the new magazine release button and adjustable sights. Also the slide was slightly modified as You can notice by looking at the pictures of the older guns.
Very first thing that I've noticed is how nice this pistol fits into my hand. Nothing like Glock 17. More like 1911 really and for good reason.
http://img.photobucket.com/albums/v2...n/IMG_3498.jpg
Unloaded pistol with the magazine inserted shows 731 grams (25.79 ounces) on my kitchen scale. I believe it's a bit more than M&P 9 or Glock 17, but not by much. Maybe the sights made out of steel?
http://img.photobucket.com/albums/v2...n/IMG_3497.jpg

Gary1911A1 05-01-2012 17:50

Also looking forward to your updates. I have never even shot one of these and have wonder what they're like.

bac1023 05-01-2012 20:32

Very cool, Nester :cool:

Rustin 05-01-2012 21:04

Sounds good. Gotta love Ruger.

Nestor 05-02-2012 14:58

Let's take a closer look at this pistol.
Thin grip frame with very simple, but functional reversible backstrap to accommodate the wide variety of hand sizes. The backstrap is not exactly as fancy as the solutions offered from the competition though. Single pin holds the backstrap made out of rubber of some kind in place and You have a choice between two sizes - flat which in my opinion simulates 1911 grip with flat mainspring housing and wow! ...curved one that reminds me GI mainspring in feel.

http://img.photobucket.com/albums/v2...n/IMG_3506.jpg

http://img.photobucket.com/albums/v2...n/IMG_3505.jpg

I really like the shape and size of the megazine release button. It's easier to use than any, oval one that I tried before. Finger works against the edge to release the drop-free magazine - quite similar to Glock pistols from what I can remember. Flat engagement surface to the rear helps to create positive inward push in my opinion. What I don't like is the ambidextrous button instead of the reversible one. I think that for the people with the big hands there is a slight chance of engaging the button on the other side of the frame while holding tight to the gun.
Since there is a magazine safety installed (that can be easily deactivated though) one may find himself during the firefight in really bad situation if such accident will occur.

http://img.photobucket.com/albums/v2...n/IMG_3503.jpg

Trigger reach is short, so I'm sure that the ladies would love this gun, especially because of the thin grip - just a bit wider than standard 1911. I can't verify the trigger pull weight, but according to the tests posted on the internet it should be 6 pounds with the reset distance of 0.33 of inch.
For those wishing to "mess up" with the trigger - Ghost Inc. offers the trigger connector for the SR pistols that suppose to improve the trigger pull significantly eliminating any overtravel and smoother up the pull. I have a standard configuration here and I'm going to keep it that way for now.
Trigger has a smooth surface that is easy on the finger. Of course there is a safety lever located inside the trigger face - exactly like on the Glock pistols.

MrMurphy 05-02-2012 16:30

Haven't shot an SR9. They do feel good in the hand, but I would use an M&P9 over the SR9 myself.

Nestor 05-02-2012 16:56

Yup Murph...it looks like the SR pistols aren't really all that popular and that's exactly why I decided to give it a try instead of M&P 9 or Glock. While I'm not even pretending to be an expert I think that I may have some valuable observations to share with the rest of You around May 2013.

Berto 05-02-2012 19:49

Hands down one of the more graceful and ergonomic Ruger autos to come down the pike, hopefully it works as good too.

MinnesnowtaWild 05-02-2012 21:20

Loved my SR9c...they are great guns.

M2 Carbine 05-03-2012 06:42

SR9C story.

A couple months ago, a lady I taught to shoot, wanted to shoot in a live fire simulator trainer.
I don't know what you call it but it's a life size "video game" using live ammo. Somehow the various scenarios act/react lifelike to your actions/shooting like a good computer game.
The bad guys will go down if you hit them with a good "killing" shot but may keep fighting/shooting back when wounded or hit with a small caliber.

The woman was doing very good with several different guns. Then for what the operator said was a fast multiple bad guy scenario I loaned the lady my Crimson Trace equipped SR9C (above picture).

One at a time the bad guys came at the lady from all directions and all distances. The action was fast.
I was amazed at just how good the lady was with that gun.

I think there were seven bad guys total. The lady dropped them all before they got off a good shot at her.

The simulator operator said no one had ever gotten through that scenario without getting shot.

I was impressed with the lady's shooting and the SR9C.:)

ESI Agent 05-03-2012 12:42

The other day I broke out my Glock 17 and SR9 to do some dry firing. Both felt good in the hand but the SR9 did feel better. It also has a more natural feel and easier target alignment , the trigger also goes to the SR9. reliability has to go to the Glock based on the number of years in service, although I have had no issues with my SR9 and am very happy with it. Be safe.:supergrin:

Comedian 05-03-2012 13:24

These feel great in the hand. Never shot one though. I look forward to your findings.

cptslick 05-03-2012 13:36

I took my SR9 to the range today. It only had 32 rds fired. At 30ft it was great and I am very satisfied with this pistol and also my SR9c. For the price it was well worth the money in my opinion.

TSAX 05-03-2012 13:39

Very cool, looking forward to the updates







:50cal:

rilkil23 05-03-2012 14:05

Sold my SR9 because I was bored with it. I shot over 3k rounds and had zero issues. My model had the round magazine release and the old loaded chamber indicator, showed a red bullet when loaded indicator popped up. I have nothing but good memories of that pistol and my wife still carries her Sr9c. Fantastic shooter and very reliable. I sold it to a friend but he had to agree to sell it back to me before getting rid of it if he didn't like it.


All times are GMT -6. The time now is 05:19.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.