Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   1911 Forums (http://glocktalk.com/forums/forumdisplay.php?f=77)
-   -   Ruger 1911 help (http://glocktalk.com/forums/showthread.php?t=1445529)

matt_lowry123 09-30-2012 15:25

Ruger 1911 help
 
I'm not new to the 1911 platform, but I'm new to this problem. I took it out today to go shoot and when I got back home to clean it. I noticed that the left side of the frame rail is getting marred up. It looks like somebody did a 30 LPI on the side of the rail. It runs good and I haven't had a problem out of 500 rounds or so. You think I should call ruger? Anybody else have this kind of problem before?

dakrat 09-30-2012 16:51

do you have a picture? have you noticed any debris?

CanMan 09-30-2012 17:08

Need a pic please... debris or the most severe galling I've ever heard of ??

matt_lowry123 09-30-2012 17:10

When I get back home I'll post a pic.

tsmo1066 09-30-2012 17:28

Sounds like galling, but if it as severe as what you describe I don't see how it couldn't be hindering proper function.

A pic is definitely needed!

HAMMERHEAD 09-30-2012 18:05

New stainless firearms need a proper break in, grease the rails often. You can switch to oil later.
Stainless on stainless is galling waiting to happen.

matt_lowry123 09-30-2012 18:18

Hang on and I'll send you a pic of the good side. I can't figure out this damn thing. I only have limited space to put the pics up.

matt_lowry123 09-30-2012 18:24

This is the side that's tore up. I clean my guns after every range session. So if something got in there, it fell out before I got home to clean it.


Outdoor Hub mobile, the outdoor information engine

matt_lowry123 09-30-2012 18:32

It keeps saying that I'm going over my limit on space. The other side is smooth. It looks like every other frame I have.

matt_lowry123 09-30-2012 18:36

Quote:

Originally Posted by HAMMERHEAD (Post 19472195)
New stainless firearms need a proper break in, grease the rails often. You can switch to oil later.
Stainless on stainless is galling waiting to happen.

I guess I should have used some grease!!!


Edit!!

I just googled "galling on sr1911" and it seems like I'm not the only one with this problem. That's a pisser that it had to happen to me. Oh well, it's still fun to shoot!!!

jstanfield103 10-01-2012 03:55

The best thing you could do would be a Email to Ruger Customer Service. Send the pictures with the Email and see what they say. They will probably want the gun back to take care of the problem. They have a good turn around and it will be done right.

Three-Five-Seven 10-01-2012 07:51

Every 1911 I own has patches on the rails where the frame and slide have worn the surface of the metal. I don't see how this design could possibly be built without sacrificial wear of the rails and slide to one another.

I look at it as the "final fitting" of the gun. So, from that perspective, there's nothing to worry about.

The SR1911 I have is certainly the tightest, inexpensive 1911 I own. I always thought that was a virtue in the 1911 world. It's probably one of the reasons why the SR1911 has developed a reputation for being particularly accurate for the 1911 type.

I really don't see anything here to be concerned about. Do, however, keep the rails well lubricated. I like Posness-Warren grease for the rails.

Gary1911A1 10-01-2012 09:04

These pictures are why I want a SR1911 made in carbon steel.

Unk 10-01-2012 09:39

http://i265.photobucket.com/albums/i...911Pair003.jpg

http://i265.photobucket.com/albums/i...911Pair001.jpg

OK so I'm no photojournalist..either.

I disassembled my two(2) SR1911 - one unfired and examined all rails. All I see are uniform, very faint tool marks on all rails.

As to galling as I recall was a very early issue in SS semi-auto pistols. The reason given was that the same exact SS could gall. The early fix was to use dissimilar SS and the problem was solved. Since that was many, many years ago would guess that new SS have developed and one non-galling SS is used.

I'd lube the rails and shoot it, if it worsens or just makes you mad send back to Ruger.

I'm not a SR1911 collector..the second one is for my son's Christmas present.

Best.

ArmoryDoc 10-01-2012 11:14

There is nothing wrong with that gun. Run the rails with a lube (very light grease) and quit sweating the small stuff. It's going to wear, especially if you don't lube it. That gun is seriously fine.

grecco 10-01-2012 13:51

Quote:

Originally Posted by ArmoryDoc (Post 19474194)
There is nothing wrong with that gun. Run the rails with a lube (very light grease) and quit sweating the small stuff. It's going to wear, especially if you don't lube it. That gun is seriously fine.

what he said,,,,
i usually apply slide glide and a drop of gun butter on the rails,
works for me.

azdave 10-01-2012 20:34

Quote:

Originally Posted by Unk (Post 19473915)

As to galling as I recall was a very early issue in SS semi-auto pistols. The reason given was that the same exact SS could gall. The early fix was to use dissimilar SS and the problem was solved. Since that was many, many years ago would guess that new SS have developed and one non-galling SS is used.

THIS is correct.

Smith & Wesson found out the hard way in the 1980's with the advent of the second gen. 639's/659's that slides/frames of the identical SS material was an issue.
I still have a jar of Rigs STAINLESS +P Lube that was popular back then to avoid issues, before they figured it out.

Arvinator 10-22-2012 18:56

I just bought a new Ruger SR1911. The rails look fine, and I have not shot it yet. I have already put Wilson's Ultima Lube grease to it...

3rdgen40 10-23-2012 10:05

Grease the slide and frame rails.Also put a thin layer of grease under the slide stop.The two rub spots I see look like the slide stop rubbing against high spots on the frame.

Jim S. 10-28-2012 08:32

Whenever I buy a stainless 1911 I have gotten in the habit of polishing the frame rails with 1000g paper (wet).
I try to do the inside of the slide rails as well.
It really helps to make things slide better. You can tell the difference from normal to polished.
Then just a little bit of grease and it is good to go.


All times are GMT -6. The time now is 00:53.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.