Glock Talk

Glock Talk (http://glocktalk.com/forums/index.php)
-   Kahr Club (http://glocktalk.com/forums/forumdisplay.php?f=111)
-   -   Dropped my PM9 and the mag flew apart. (http://glocktalk.com/forums/showthread.php?t=817260)

Kramer 01-27-2008 14:03

Dropped my PM9 and the mag flew apart.
 
I dropped the gun on the kitchen floor and it must have landed on the mag. The mag flew apart throwing every mag part and round all over the room. Anyone ever have this happen. It was the 9mm six round mag.

m4coyote 01-27-2008 14:27

I inadvertently hit the mag release on my PM9 at the range last week, and the fully loaded mag fell straight onto the concrete pad. The magazine did not come apart, but a couple of rounds came out of it. The result was a very slight beauty mark on the base plate.:embarassed: I have never done this before, and it was obviously my fault, but no real damage occurred.

Your magazine must have hit on the corner of the baseplate, and the force was enough to dislodge it from the tabs. Did it re-assemble, and function OK?

Kramer 01-27-2008 14:57

The mags seems fine now. No marks and it feeds fine. Just makes me question whether it slid off or popped off.

cc1970 02-22-2010 20:54

i had this happend to me at the range, with fully loaded glock magazine.....33rdr

viniglock 02-22-2010 20:57

WoW:wow:

Glad things are okay. Kahr magazines are not cheap to replace!

wagonm 02-22-2010 23:20

Not too bad, for <$30 shipped


Quote:

Originally Posted by viniglock (Post 14811898)
WoW:wow:

Glad things are okay. Kahr magazines are not cheap to replace!


viniglock 02-22-2010 23:45

Quote:

Originally Posted by wagonm (Post 14812867)
Not too bad, for <$30 shipped

Where?

Caver 60 02-23-2010 10:37

Not from Kahr. My dealer gets them for me for about that price. Don't know where he gets them don't care as long as the price is right. Never paid him even close to factory list price for a new Kahr either.

viniglock 02-23-2010 11:17

Quote:

Originally Posted by Caver 60 (Post 14814596)
Not from Kahr. My dealer gets them for me for about that price. Don't know where he gets them don't care as long as the price is right. Never paid him even close to factory list price for a new Kahr either.

Good 4 U!

Jeff82 02-23-2010 11:24

Quote:

Originally Posted by cc1970 (Post 14811876)
i had this happend to me at the range, with fully loaded glock magazine.....33rdr

And the base plate came off? Was it in the gun or just the mag?

wagonm 02-23-2010 22:34

I did have under estimated the shipping, my apology.. but Invehoe is $29. Not really <30 shipped, but still in the ball park.
http://www.ivanhoeoutlet.com/shop/in...13&prevstart=0

CheaperThanDirt used to be in the <$30, apparently they rae now in $31.

and there is also a used market too :supergrin:

Quote:

Originally Posted by viniglock (Post 14812998)
Where?


viniglock 02-23-2010 22:44

Quote:

Originally Posted by wagonm (Post 14819152)
I did have under estimated the shipping, my apology.. but Invehoe is $29. Not really <30 shipped, but still in the ball park.
http://www.ivanhoeoutlet.com/shop/in...13&prevstart=0

CheaperThanDirt used to be in the <$30, apparently they rae now in $31.

and there is also a used market too :supergrin:

Logically is cheaper than Kahr store, it may come out to Less than $40 shipped while at Kahr will be $46 shipped. +/- you save something. That is where I got it for the PM9.


All times are GMT -6. The time now is 18:12.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013, Glock Talk, All Rights Reserved.