View Single Post
Old 01-06-2010, 13:56   #10
Colorado4Wheel
Senior Member
 
Colorado4Wheel's Avatar
 
Join Date: Nov 2006
Location: CO
Posts: 14,438
Quote:
Originally Posted by unclebob View Post
Okay, I used 4x4 for the legs, dado the legs I ran 2x6 for the front top than 2x4 on the sides and back for the top and bottom on the sides and back plywood. Also ran 2x4 from the top two bottoms also dado in. I also on use lag bolts too hold it all together. That way I could change things around and also where if need be I could take it all apart too move.
For the Shelves I used a sheet of plywood. On all of the uprights I used the metal strips for shelving and metal clips. That way I could change the height if need be. I made doors for the front. I used 1X12 Than stained inside and out, and put a durable coat on top of that. I do not remember what I used.
Do you mind snapping a picture?
__________________
Steve
Colorado4Wheel is offline   Reply With Quote