View Single Post
Old 01-13-2010, 23:00   #3
Got Glock?
Join Date: Sep 2009
Location: S.F.B.A. California
Posts: 66
Originally Posted by kc lefty View Post
i dont load the same bullet (brand) but I do load berrys 200 gr, copper plated flat point with titegroup.

start at 4.5 and work up to 4.8. I shoot mine through 1911's but the glock will be fine.

i shoot the lightest grain possible to cycle the gun. 4.5 to 4.8 works well for me.

i use 1.20 - 1.25 OAL. load a dummy (no powder) drop it in the barrell, it should drop in and out easily. then hand cycle it in the gun. if that works, load 5 actutal then hand cycle those.

this is NOT rocket science. if i can do it, anyone can do it.
Thank you. At least I have a ball park idea of where I need to be.

Any of you using a Lee Turret Press? I am just wondering what Micro Disk number you are using. I just tried a .40 which should give me 4.7grs, but when I weigh it comes out around 4.4 - 4.5grs. Should I go up to the next one on the table which would be .43 to give me 5.1grs that will probably weigh around 4.7 - 4.8grs on the scale?
Jaybo510 is offline   Reply With Quote