View Single Post
Old 01-25-2010, 15:07   #2
Join Date: Mar 2009
Posts: 26
Make sure your de-priming stem doesn't have a burr on it, if it does polish (lightly) it smooth with some emery cloth. And there is a fair chance that you need to adjust the die to fully push out the primer, if it is only pushing it out "1/2" the way, it may be causing this Problem. You should be able to see the de-priming stem "poking"out of the bottom of the case (by an 1/8" ) on a correctly de-primed one.
bfoosh006 is offline   Reply With Quote