Glock Talk - View Single Post

_The_Shadow · 02-27-2011, 17:38

Much thanks to MeatHead9 & JT and others with their work with the 9x25 Dillon and also for the help with identifing what does seem like the powder used by DT in their 9x25's cartridges...LongShot is very comparable...

Chronographed Feb 27 2011
Temp…76*
Elevation 22’ above sea level

Cartridge 9X25 Dillon formed from Winchester 10mm cases
Loaded with 10.5 grains of Hodgdon’s LongShot powder
ZERO 121 grain 0.356” JHP (these are the 38Super bullets with good copper jacket) COAL set to 1.260"

Gun S&W 1006 with Bar-Sto Match Grade 5.00” barrel

1565 low
1592
1637 high
1615

Gun Glock 29 with LWD 9x25 3.78” barrel

1539
1524 low
1542 high

Very impressed with the Hodgdon’s LongShot results for both pistols. The performance is very comparable to that Double Tap's loads I have from the S&W.

Cartridge 9X25 Dillon formed from Winchester 10mm cases
Loaded with 14.2 grains of Winchester 296 powder
ZERO 121 grain 0.356” JHP (these are the 38Super bullets with good copper jacket)

Gun S&W 1006 with Bar-Sto Match Grade 5.00” barrel

1209 low
1216
1284 high

This one has plenty room for improvement…

02-27-2011, 17:38	#118
_The_Shadow Ret. Fireman Join Date: Jul 2007 Location: Southeast, LoUiSiAna Posts: 3,891	Much thanks to MeatHead9 & JT and others with their work with the 9x25 Dillon and also for the help with identifing what does seem like the powder used by DT in their 9x25's cartridges...LongShot is very comparable... Chronographed Feb 27 2011 Temp…76* Elevation 22’ above sea level Cartridge 9X25 Dillon formed from Winchester 10mm cases Loaded with 10.5 grains of Hodgdon’s LongShot powder ZERO 121 grain 0.356” JHP (these are the 38Super bullets with good copper jacket) COAL set to 1.260" Gun S&W 1006 with Bar-Sto Match Grade 5.00” barrel 1565 low 1592 1637 high 1615 Gun Glock 29 with LWD 9x25 3.78” barrel 1539 1524 low 1542 high Very impressed with the Hodgdon’s LongShot results for both pistols. The performance is very comparable to that Double Tap's loads I have from the S&W. Cartridge 9X25 Dillon formed from Winchester 10mm cases Loaded with 14.2 grains of Winchester 296 powder ZERO 121 grain 0.356” JHP (these are the 38Super bullets with good copper jacket) Gun S&W 1006 with Bar-Sto Match Grade 5.00” barrel 1209 low 1216 1284 high This one has plenty room for improvement… __________________ Southeast, LoUiSiAna NRA Life Member BASS Life Member Last edited by _The_Shadow; 02-27-2011 at 19:00..