Important Notice: The site is currently being upgraded to a new software system. This process could take a day or two to complete. During that time, we are going to leave the site up here, on its old software. WHAT GETS POSTED HERE DURING THIS TRANSITION WILL NOT BE COPIED OVER ONTO THE NEW SITE, WHEN THE UPGRADE IS COMPLETE. When we swap over, the content posted while this message is visible will be lost. We wanted to give you folks a place to hang out and talk while we worked though. We will let you know when we are finished. Please pardon the inconvenience, during this transition.

Home Forums Classifieds GT Store Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 12-06-2011, 15:48   #1
jack76590
Senior Member
 
Join Date: Aug 2004
Posts: 2,164
Anyone detail strip their slide?

I have a PCR that I have fired about 2,000 rounds. Don't plan to do soon, but at some point considering detail stripping slide to remove any crud. In my experience crud collects in slides esp around the extractor.

So I was wondering if anyone has detail stripped their PCR slide or that of similar CZ pistol? Also did you find much crud? Where was crud, around extractor, firing pin, etc? I was thinking perhaps only necessary to remove extractor, as that is where most crud would collect.

Also did you reuse roll pins or replace? How hard was it to do? Any tips, instructions? Thanks for any info.
jack76590 is offline   Reply With Quote
Old 04-03-2013, 09:25   #2
alwaysshootin
Senior Member
 
alwaysshootin's Avatar
 
Join Date: Nov 2005
Posts: 5,064
Apparently not!
__________________
If guns kill people, then, I can blame my pencil on my spelling!
alwaysshootin is offline   Reply With Quote
Old 04-04-2013, 05:50   #3
Linux3
Senior Member
 
Linux3's Avatar
 
Join Date: Dec 2008
Posts: 1,399
I have a 75 Shadow. Don't know about any differences.
I've replaced the front sight and needed to replace the roll pin as I screwed it up.
I've removed the extractor and cleaned it. It had lots of gunk behind and around the spring. No new parts needed.
I remove the firing pin on a regular basis and clean it the spring and channel. No new parts required.

I have spare parts for everything on hand because Murphy can strike at any time.

That said, I don't know what you mean by detail strip the slide. There is nothing else that comes apart, at least on my 75.

If you want to detail strip the frame.... Now we are talking a whole 'nother can of worms and way to involved to discuss here.

Last year before a big match I totally took down my 75 to nothing on nothing. An interesting experience putting it back together.
__________________
It it's not on fire,
It's a software problem.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Linux3 is offline   Reply With Quote
Old 04-04-2013, 16:47   #4
countrygun
Senior Member
 
Join Date: Mar 2012
Posts: 17,068
Quote:
Originally Posted by Linux3 View Post
I have a 75 Shadow. Don't know about any differences.
I've replaced the front sight and needed to replace the roll pin as I screwed it up.
I've removed the extractor and cleaned it. It had lots of gunk behind and around the spring. No new parts needed.
I remove the firing pin on a regular basis and clean it the spring and channel. No new parts required.

I have spare parts for everything on hand because Murphy can strike at any time.

That said, I don't know what you mean by detail strip the slide. There is nothing else that comes apart, at least on my 75.

If you want to detail strip the frame.... Now we are talking a whole 'nother can of worms and way to involved to discuss here.

Last year before a big match I totally took down my 75 to nothing on nothing. An interesting experience putting it back together.
That sums it up.

I completely stripped my 75 frame and a medical emergency with a family member came up Long story but it was a long time before I could get back to it.

not fun at all.
countrygun is offline   Reply With Quote
Old 04-30-2015, 08:42   #5
BuckyP
Lifetime Membership
Senior Member
 
BuckyP's Avatar
 
Join Date: Feb 2005
Location: PA
Posts: 11,266
I hear detail stripping these are not for the timid. I'm pretty well versed in completely stripping Sig P series, Beretta 92 series, 1911s and of course GLOCKs.

Are the CZs even more complex than a Sig 226 or Beretta 92?
BuckyP is offline   Reply With Quote

 
  
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 06:13.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds
GT Store


Users Currently Online: 641
172 Members
469 Guests

Most users ever online: 4,867
May 19, 2015 at 1:03