Glock Talk
Welcome To The Glock Talk Forums.
 |
01-27-2013, 22:37
|
#1
|
|
Senior Member
Join Date: Apr 2008
Posts: 199
|
Gen4 G34 parts swapping with Gen3 G17 extractor
Can I swap out a LCI Non-Dip Extractor from a Gen3 G17 (production date is around 2007) with a Gen4 G34 with the dipped extractor? Do i need to switch any other parts? I'm thinking about trying to take this to the range tomorrow and test it out.
I ask b/c i have a gen3 g17 that runs great with everything. My G34 is running into issues (erratic ejection to the face) with the same ammo that the g17 runs fine with.
|
|
|
|
01-27-2013, 23:05
|
#2
|
|
Senior Member
Join Date: Jan 2008
Location: Dayton, TN.
Posts: 4,758
|
I took a non-dip extractor out of a 2008 Gen 3 G23 and put it in my 2011 Gen 4 G27 and I've had no hiccups with it at all.
__________________
When the people fear their government, there is tyranny; when the government fears the people, there is liberty.......
Thomas Jefferson
|
|
|
|
01-28-2013, 07:02
|
#3
|
|
Senior Member
Join Date: Apr 2008
Posts: 199
|
good to hear, I'm hoping the same goes for the 9's. I would like to try this out today at around 10am. I'm going to probablys work on the parts swap here in about an hour.
|
|
|
|
|
01-28-2013, 07:38
|
#4
|
|
Senior Member
Join Date: Jan 2012
Location: McDonough, Ga.
Posts: 476
|
You can swap the 9mm extractors, no other part swaps necessary. Btw, my 34 also needed the non-dipped to be 100%:thumbup:
posted using Outdoor Hub Campfire
__________________
Certified Glock Armorer, GSSF Lifetime, NRA Life Member,NRA-RSO, NROI-RO, USPSA
|
|
|
|
|
01-28-2013, 12:49
|
#5
|
|
Senior Member
Join Date: Apr 2008
Posts: 199
|
well the older extractor did not fix my problem, so I am guessing this is not an extractor problem. I have all the updated parts. I may try going with a lighter aftermarket recoil spring.
|
|
|
|
|
01-28-2013, 12:56
|
#6
|
|
Senior Member
Join Date: Aug 2012
Location: Abilene, TX
Posts: 557
|
Yep... sometimes the Gen4 9mms need a lighter recoil spring or hotter ammo. Good luck!
|
|
|
|
|
01-28-2013, 13:05
|
#7
|
|
Senior Member
Join Date: Apr 2008
Posts: 199
|
just ordered the jager gen4 guide rod and the 13 and 15lb ISMI springs. I'll let you all know how it goes. I normally would not do this for a glock, but since the 34 is meant to be a range gun only, i'm willing to tinker with it. Especially since this is already a replacement gun from glock.
|
|
|
|
|
01-28-2013, 13:12
|
#8
|
|
Senior Member
Join Date: Apr 2008
Posts: 199
|
i also have the white sound depresser plunger on had to try out.
|
|
|
|
|
02-01-2013, 02:27
|
#9
|
|
Senior Member
Join Date: Dec 2002
Posts: 767
|
Quote:
Originally Posted by firstg19
Can I swap out a LCI Non-Dip Extractor from a Gen3 G17 (production date is around 2007) with a Gen4 G34 with the dipped extractor? Do i need to switch any other parts? I'm thinking about trying to take this to the range tomorrow and test it out.
I ask b/c i have a gen3 g17 that runs great with everything. My G34 is running into issues (erratic ejection to the face) with the same ammo that the g17 runs fine with.
|
The extractor has to match the spring loaded bearing.
LCI extractor must have LCI SLB, non LCI extractor uses the non LCI SLB.
__________________
Μολών λαβέ
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 10:27.
|
|
|
