Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 09-05-2008, 14:48   #1
MakeMineA10mm
Lifetime Membership
300AAC brass
 
MakeMineA10mm's Avatar
 
Join Date: Feb 1999
Location: Central Illinois
Posts: 7,856
Blog Entries: 13
Special Bullet load data (XPBs, etc.)

This is the thread to post loads with various company's powders for bullets that cannot be loaded with similar loads to other same-weight bullets, such as the Barnes XPB. Obviously, because of their construction, they have different loading requirements, so post these loads here.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Looking for: FBI 100yr, Bell Helo, FOP Lodge1, Kiowa Warrior, SCI, and any new/unknown-to-me commemoratives.
MakeMineA10mm is online now   Reply With Quote
Old 09-25-2008, 12:46   #2
_The_Shadow
Ret. Fireman
 
_The_Shadow's Avatar
 
Join Date: Jul 2007
Location: Southeast, LoUiSiAna
Posts: 4,279
These all copper bullets are substantially longer and occupy more casing capacity...using a powder charge weight for a lead core weight bullet will generate higher pressures with these longer bullets!
__________________
Southeast, LoUiSiAna
NRA Life Member
BASS Life Member
_The_Shadow is offline   Reply With Quote
Old 07-05-2009, 12:54   #3
Waffentomas
Semper Fidelis
 
Waffentomas's Avatar
 
Join Date: May 1999
Location: Blue State
Posts: 617
7.8 gr of 800x and the 95gr .40 caliber mini-ball, with the 135gr Nosler JHP on top. CCI 300 primers.

This closely resembles the DT 230gr Equilizer (duplex) load.

I worked this load up very slowly, starting at 6.5 gr of 800x and working up .1gr at a time. My chrono won't function when two projectiles are firing through the screens. I think it'll do around 1125fps out of my Wilson CQB.

Tom

Last edited by Waffentomas; 01-22-2010 at 20:54..
Waffentomas is offline   Reply With Quote
Old 11-03-2009, 06:17   #4
whenmonkeysfly
CLM Number 249
Charter Lifetime Member
 
whenmonkeysfly's Avatar
 
Join Date: Jul 2006
Location: Florida
Posts: 360


Other than Blue Dot flash, some smoke and a barrel requiring more cleaning than usual, am I pushing "Laser Cast" bullets too far with this load?

Laser Cast 180 grain TC with 11 grains of Blue Dot. Used CCI 300 LP primers, Starline Brass. Shot from a customized G20 - Lone Wolf 6" externally ported barrel, Wolff 24lb spring /SS guide rod, Wolff/Brownells competition spring set, Lightning Strike LP Trigger, and some dremel work. Here's chronograph data from three, five shot strings:

Total Strings = 3
Feet Per Second

String 1
1) 1282.0 -20.8
2) 1301.0 -1.8
3) 1334.0 31.2
4) 1293.0 -9.8
5) 1304.0 1.2

High: 1334.0
Low: 1282.0
E.S.: 52.0
Ave.: 1302.8
S.D.: 19.4
95%: 26.9

String 2
1) 1298.0 10.6
2) 1307.0 19.6
3) 1289.0 1.6
4) 1273.0 -14.4
5) 1270.0 -17.4

High: 1307.0
Low: 1270.0
E.S.: 37.0
Ave.: 1287.4
S.D.: 15.9
95%: 22.1

String 3
1) 1275.0 -29.8
2) 1337.0 32.2
3) 1291.0 -13.8
4) 1311.0 6.2
5) 1310.0 5.2

High: 1337.0
Low: 1275.0
E.S.: 62.0
Ave.: 1304.8
S.D.: 23.3
95%: 32.3
__________________
Navy Corpsman, 1971-1975; NRA Patron Life Member; The 10mm "...more energy at 100 yards than a .45 ACP at the muzzle." - Massad Ayoob quoting Col. Jeff Cooper

Last edited by whenmonkeysfly; 11-03-2009 at 06:23..
whenmonkeysfly is offline   Reply With Quote
Old 01-22-2010, 06:54   #5
whenmonkeysfly
CLM Number 249
Charter Lifetime Member
 
whenmonkeysfly's Avatar
 
Join Date: Jul 2006
Location: Florida
Posts: 360


Quote:
Originally Posted by Waffentomas View Post
7.8 gr of 800x and the 95gr .40 caliber mini-ball, with the 135gr Nosler JHP on top. CCI 300 primers.

This closely resembles the DT 230gr Equilizer (duplex) load.

I worked this load up very slowly, starting at 6.5 gr of 800x and working up .1gr at a time. My chrono won't function when two projectiles are fireing through the screens. I think it'll do around 1125fps out of my Wilson CQB.

Tom
Tom,

Enjoyed your 10mm article. Good information. Never been a huge fan of the .45acp since my days in the service. Really love my 10mm's though! Mike puts together some great loads... XPB 155 is my favorite CC load.

"Doc" [-Jay]
__________________
Navy Corpsman, 1971-1975; NRA Patron Life Member; The 10mm "...more energy at 100 yards than a .45 ACP at the muzzle." - Massad Ayoob quoting Col. Jeff Cooper

Last edited by whenmonkeysfly; 01-22-2010 at 06:56..
whenmonkeysfly is offline   Reply With Quote
Old 04-03-2010, 10:29   #6
Snapper2
Senior Member
 
Snapper2's Avatar
 
Join Date: Feb 2008
Location: s.east Texas
Posts: 2,357
I found 10mm data for the Barnes 140gr TAC-XP on loaddata.com. 11-13gr of #7 and standard LP primers. With 12gr at 1395 fps. I loaded several mid-range loads in 400 cor bon at 12gr that were accurate without too much kick. Not sure what velocity these 140gr bullets need to fly to be effective(compared to Barnes 155gr bullet.).Corbon DPX in 40cal(140gr) has a velocity of 1200fps. I heard that Double Tap is coming out with a 140gr loading in 10mm at 1500fps.

Last edited by Snapper2; 04-03-2010 at 10:42..
Snapper2 is offline   Reply With Quote
Old 11-14-2010, 14:11   #7
Burien
Senior Member
 
Burien's Avatar
 
Join Date: Aug 2009
Posts: 284
140 gn General copper bullets

8.6 gn of tite group at 1.250 = 1405 fps out of a glock 29 MAX Load
Burien is offline   Reply With Quote
Old 03-13-2011, 21:57   #8
_The_Shadow
Ret. Fireman
 
_The_Shadow's Avatar
 
Join Date: Jul 2007
Location: Southeast, LoUiSiAna
Posts: 4,279
I posted this info in the reloading section in an effort to provide some specs for the bullets...
I had wrote Barnes about acquiring a few samples of the bullets listed below to study their physical characteristics, because I knew that the solid copper bullets where longer that the lead core counter parts...Below is the measured data of the samples received. I must commend Barnes Bullets and thank them for these very nice bullets...

Barnes Bullets (samples)

TAC-XP FB 140 grain pn# 40005 10mm/40S&W 0.400”
Total Length 0.680” Dia. 0.400” (Hornady 200XTP has Total Length 0.680”)
(While not the same weight they are same length)
Nose Outside Dia. @ HP 0.295”
Nose Inside Dia. @ HP 0.220”
Hollow Cavity Depth 0.380”

TAC-XP FB 125 grain pn# 35503 357SIG 0.355”
Total Length 0.720” Dia. 0.355” (ZERO 121 grain JHP has Total Length 0.550”)
(Difference in length = 0.170”)
Nose Outside Dia. @ HP 0.224”
Nose Inside Dia. @ HP 0.180”
Hollow Cavity Depth 0.303”

After I do my load test I repost here...
__________________
Southeast, LoUiSiAna
NRA Life Member
BASS Life Member

Last edited by _The_Shadow; 06-06-2011 at 17:33..
_The_Shadow is offline   Reply With Quote
Old 06-06-2011, 04:12   #9
21Carrier
Until I Gota 29
 
21Carrier's Avatar
 
Join Date: Feb 2011
Location: Hoover, AL
Posts: 3,037
Shadow, I just ordered some 125gr Barnes TAC-XP bullets, and it got me looking around for load data. I see in your post above that you list the bullet length for the 125gr as .720", and the 140gr bullet at .680". Is that backwards? I can't imagine the 125gr bullet being longer than the 140gr.
21Carrier is offline   Reply With Quote
Old 06-06-2011, 09:18   #10
_The_Shadow
Ret. Fireman
 
_The_Shadow's Avatar
 
Join Date: Jul 2007
Location: Southeast, LoUiSiAna
Posts: 4,279
21Carrier the data for the 125 grain I lised was for the 357Sig bullets at .720" length "NOT the 10mm 125gr." Sorry if there was any confusion!

Barnes sent the 125gr. for testing in my 9x25Dillon project...
__________________
Southeast, LoUiSiAna
NRA Life Member
BASS Life Member
_The_Shadow is offline   Reply With Quote
Old 06-06-2011, 15:26   #11
21Carrier
Until I Gota 29
 
21Carrier's Avatar
 
Join Date: Feb 2011
Location: Hoover, AL
Posts: 3,037
Ooooohhhhhh gotcha! Thanks. That was giving me fits. I was also wondering why the hell you'd be comparing it to a 9mm bullet. Thanks for the clarification.

Last edited by 21Carrier; 08-12-2011 at 15:10..
21Carrier is offline   Reply With Quote
Old 06-15-2011, 02:19   #12
21Carrier
Until I Gota 29
 
21Carrier's Avatar
 
Join Date: Feb 2011
Location: Hoover, AL
Posts: 3,037
Oops, Tammons and I have been sitting on this data for a week. I forgot to post it here. Here's Barnes's data for the 10mm 125gr and 140gr TAC-XP bullets:

10mm Reloading Forum
21Carrier is offline   Reply With Quote
Old 08-07-2011, 18:18   #13
21Carrier
Until I Gota 29
 
21Carrier's Avatar
 
Join Date: Feb 2011
Location: Hoover, AL
Posts: 3,037
Here's some load data using the Barnes TAC-XP bullet, Power Pistol, one load of Unique, and a G29 (stock barrel, 21lb spring). Barnes' PP max is 10.4gr, Unique is 8.4gr. All of these were with Starline nickel brass, CCI 300s, and a COAL of 1.250".

CED ProChrono Digital, 91*F, 55% humidity, 495' above sea level, distance from muzzle ~10ft.

Barnes 125gr TAC-XP/10.2gr Power Pistol
3 rounds
-1275
-1298
-1308
High: 1308
Low: 1275
Average: 1293
ES: 33
SD: 16
Muzzle Energy: 464fpe

Barnes 125gr TAC-XP/10.4gr Power Pistol
3 rounds
-1325
-1291
-1288
High: 1325
Low: 1288
Average: 1301
ES: 37
SD: 20
Muzzle Energy: 470fpe

Barnes 125gr TAC-XP/10.6gr Power Pistol
3 rounds
-1280
-1325
-1262
High: 1325
Low: 1262
Average: 1289
ES: 63
SD: 32
Muzzle Energy: 461fpe

Barnes 125gr TAC-XP/10.8gr Power Pistol
3 rounds
-1272
-1278
-1298
High: 1298
Low: 1272
Average: 1282
ES: 26
SD: 13
Muzzle Energy: 456fpe

Barnes 125gr TAC-XP/10.9gr Power Pistol
4 rounds
-1256
-1303
-1324
-1283
High: 1324
Low: 1256
Average: 1291
ES: 68
SD: 28
Muzzle Energy: 463fpe

Barnes 125gr TAC-XP/11.0gr Power Pistol
5 rounds
-1257
-1291
-1366
-1303
-1321
High: 1366
Low: 1257
Average: 1307
ES: 109
SD: 40
Muzzle Energy: 474fpe

Here's some data with Unique:

Barnes 125gr TAC-XP/8.6gr Unique:
***COAL: 1.250"***
7 rounds
-1293
-1297
-1298
-1267
-1293
-1283
-1290
High: 1298
Low: 1267
Average: 1288.7
ES: 31
Muzzle Energy: 460fpe
21Carrier is offline   Reply With Quote
Old 08-12-2011, 15:07   #14
21Carrier
Until I Gota 29
 
21Carrier's Avatar
 
Join Date: Feb 2011
Location: Hoover, AL
Posts: 3,037
Here is some new data that I developed for the 125gr Barnes TAC-XP bullet. Out of my G29, I got 160fps MORE than ANY of Barnes data. The fastest I could get with Barnes data (Unique and Power Pistol) was 1300fps. With these 800-X loads, I hit 1460fps. Again, this is all out of my G29. I'm sure 1525-1550fps would be easy out of a G20. This load can almost certainly be increased. I do not think it is maximum. I ran out of bullets, and had to stop here (that's why there are only 3 chrono results per load, I'll test more soon), but case head expansion was minimal. I'm thinking this load could be pushed to 12.0gr or more, IF compression of the powder does not stop it. 11.4gr is VERY compressed, but I'm not getting bullet push-back, so I think I can go a bit further.


All loads used new Starline nickel brass, CCI 300 primers, Barnes 125gr TAC-XP bullets, and a COAL of 1.260". They were fired from my G29 with stock barrel, and 21lb Wolff spring. Temperature was around 90*, humidity about 70%, elevation 495ft. The chronograph is a Competition Electronics ProChrono Digital, all shots were fired from ~10ft.

10.5gr 800-X:
3 rounds
-1393
-1366
-1388
Average: 1382
ES: 27
SD: 14

10.8gr 800-X:
3 rounds
-1438
-1406
-1441
Average: 1428
ES: 35
SD: 19

11.1gr 800-X:
3 rounds
-1452
-1400
-1479
Average: 1443
ES: 79
SD: 40

11.4gr 800-X:
3 rounds
-1457
-1463
-1458
Average: 1459
ES: 6
SD: 3

Last edited by 21Carrier; 08-12-2011 at 15:16..
21Carrier is offline   Reply With Quote
Old 08-13-2011, 07:53   #15
whenmonkeysfly
CLM Number 249
Charter Lifetime Member
 
whenmonkeysfly's Avatar
 
Join Date: Jul 2006
Location: Florida
Posts: 360


Thanks for the Data 21Carrier!

Great data Carrier! Any powder preference - Unique, Power Pistol, 800-X so far with this loading? Cleaner burning, easier to meter etc.? Any thought to using a CCI-350 LPM primer?

-Jay (WMF)
__________________
Navy Corpsman, 1971-1975; NRA Patron Life Member; The 10mm "...more energy at 100 yards than a .45 ACP at the muzzle." - Massad Ayoob quoting Col. Jeff Cooper
whenmonkeysfly is offline   Reply With Quote
Old 08-25-2011, 09:55   #16
21Carrier
Until I Gota 29
 
21Carrier's Avatar
 
Join Date: Feb 2011
Location: Hoover, AL
Posts: 3,037
Quote:
Originally Posted by whenmonkeysfly View Post
Great data Carrier! Any powder preference - Unique, Power Pistol, 800-X so far with this loading? Cleaner burning, easier to meter etc.? Any thought to using a CCI-350 LPM primer?

-Jay (WMF)
Sorry, I just saw your post. So far, I would use 800-X, simply because it absolutely destroys all the others in velocity. However, the gap would likely be less in a longer barrel. As we all know, 800-X meters like crap, but is pretty clean. I think Longshot will be the ultimate winner, though. Mudrush has led me to believe that I can push further with it (mainly due to space concerns with the LONG Barnes bullets). The 11.4gr 800-X load shows light case expansion, so I know I can go further, but that load is HEAVILY compressed, so I'll likely run out of space before I get much more velocity. With Longshot, I should be able to get to 1500-1550fps out of my G29. As soon as I get more Barnes bullets, I'll work up some loads with Longshot.

Last edited by 21Carrier; 08-25-2011 at 09:56..
21Carrier is offline   Reply With Quote
Old 08-25-2011, 12:21   #17
whenmonkeysfly
CLM Number 249
Charter Lifetime Member
 
whenmonkeysfly's Avatar
 
Join Date: Jul 2006
Location: Florida
Posts: 360


Quote:
Originally Posted by 21Carrier View Post
Sorry, I just saw your post. So far, I would use 800-X, simply because it absolutely destroys all the others in velocity. However, the gap would likely be less in a longer barrel. As we all know, 800-X meters like crap, but is pretty clean. I think Longshot will be the ultimate winner, though. Mudrush has led me to believe that I can push further with it (mainly due to space concerns with the LONG Barnes bullets). The 11.4gr 800-X load shows light case expansion, so I know I can go further, but that load is HEAVILY compressed, so I'll likely run out of space before I get much more velocity. With Longshot, I should be able to get to 1500-1550fps out of my G29. As soon as I get more Barnes bullets, I'll work up some loads with Longshot.
Looking forward to the data 21Carrier. Longshot has become my favorite 10mm powder (and not just because I have 100lbs. of it. ) It seems to meter well and you can get really good velocities from it.
__________________
Navy Corpsman, 1971-1975; NRA Patron Life Member; The 10mm "...more energy at 100 yards than a .45 ACP at the muzzle." - Massad Ayoob quoting Col. Jeff Cooper

Last edited by whenmonkeysfly; 08-25-2011 at 12:34.. Reason: I got too far off topic. Will post question on another thread.
whenmonkeysfly is offline   Reply With Quote
Old 09-30-2011, 17:00   #18
_The_Shadow
Ret. Fireman
 
_The_Shadow's Avatar
 
Join Date: Jul 2007
Location: Southeast, LoUiSiAna
Posts: 4,279
Well time flies...March 12th I posted the original post for this. I wanted to do a gelatin but did water jugs instead and tested two of the listed loads...Tested from the S&W 1006 5" barrel.

TAC-XP FB 140 grain pn# 40005 10mm/40S&W 0.400”

10.5 grain Blue Dot 1178 fps entered the 4th jug of water barely hanging on the entrance hole. Classic opened petals expanded to 0.7495". Primer slighly flattened.


12.6 grains of AA#9 (had to adjust powder shoving the bullet back out 1.270")(Totally compressed @ 12.6 gr.)
1181 fps, Primer was totally flattened to the edges. It penetrated 5" of sandy dirt and the bullet failed to open, partially folded in on itself.

http://i1086.photobucket.com/albums/...IMG_0418-1.jpg

http://i1086.photobucket.com/albums/...IMG_0417-1.jpg
Winchester cases
Winchester LP primers
COAL of 1.255"

I was not expecting the highest performance obtainable (but should be up there pretty good) but looking for the difference of what these same length, 140 grain bullets do as compared to the speeds from the 200 grain XTP's with similar full loadings. 10.5gr Blue Dot case 0.4275", 12.6gr AA#9 case 0.4280"
__________________
Southeast, LoUiSiAna
NRA Life Member
BASS Life Member
_The_Shadow is offline   Reply With Quote
Old 12-31-2011, 22:05   #19
_The_Shadow
Ret. Fireman
 
_The_Shadow's Avatar
 
Join Date: Jul 2007
Location: Southeast, LoUiSiAna
Posts: 4,279
Here are the results of all five test shots...

TAC-XP FB 140 grain pn# 40005 10mm/40S&W 0.400”

10.5 grain Blue Dot @ 1178 fps entered the 4th jug of water barely hanging on the entrance hole. Classic opened petals expanded to 0.7495". Primer slightly flattened.

12.6 grains of AA#9 (had to adjust powder shoving the bullet back out 1.270")(Totally compressed @ 12.6 gr.) @ 1181 fps, Primer was totally flattened to the edges. It penetrated 5" of sandy dirt and the bullet failed to open, partially folded in on itself. Case expanded to 0.4280”

10.7 grains of AA#7 @ 1112 fps three jugs inside 3rd jug of water. Petals opened as designed to 0.7495". Primer badly flattened. Case expanded to 0.4289”

8.2 grains of Long Shot @ 1247 fps entered the 4th Jug of water. Petals opened as designed. Classic opened petals expanded to 0.7915". Primer slightly flattened. Case expanded to 0.4275”

8.0 grains of Power Pistol @ 1220 fps entered the 4th Jug of water. Petals opened as designed. Classic opened petals expanded to 0.7655". Primer slightly flattened. Case expanded to 0.4280”

Winchester cases
Winchester LP primers
COAL of 1.255"
Tested from the S&W 1006 5" barrel.
__________________
Southeast, LoUiSiAna
NRA Life Member
BASS Life Member

Last edited by _The_Shadow; 12-31-2011 at 22:06..
_The_Shadow is offline   Reply With Quote
Old 12-31-2011, 22:25   #20
whenmonkeysfly
CLM Number 249
Charter Lifetime Member
 
whenmonkeysfly's Avatar
 
Join Date: Jul 2006
Location: Florida
Posts: 360


Quote:
Originally Posted by _The_Shadow View Post
Here are the results of all five test shots...

TAC-XP FB 140 grain pn# 40005 10mm/40S&W 0.400

10.5 grain Blue Dot @ 1178 fps entered the 4th jug of water barely hanging on the entrance hole. Classic opened petals expanded to 0.7495". Primer slightly flattened.

12.6 grains of AA#9 (had to adjust powder shoving the bullet back out 1.270")(Totally compressed @ 12.6 gr.) @ 1181 fps, Primer was totally flattened to the edges. It penetrated 5" of sandy dirt and the bullet failed to open, partially folded in on itself. Case expanded to 0.4280

10.7 grains of AA#7 @ 1112 fps three jugs inside 3rd jug of water. Petals opened as designed to 0.7495". Primer badly flattened. Case expanded to 0.4289

8.2 grains of Long Shot @ 1247 fps entered the 4th Jug of water. Petals opened as designed. Classic opened petals expanded to 0.7915". Primer slightly flattened. Case expanded to 0.4275

8.0 grains of Power Pistol @ 1220 fps entered the 4th Jug of water. Petals opened as designed. Classic opened petals expanded to 0.7655". Primer slightly flattened. Case expanded to 0.4280

Winchester cases
Winchester LP primers
COAL of 1.255"
Tested from the S&W 1006 5" barrel.
Thanks for the Data, Shadow... Impressive! Have a Great New Year!

-WMF
(Jay)
__________________
Navy Corpsman, 1971-1975; NRA Patron Life Member; The 10mm "...more energy at 100 yards than a .45 ACP at the muzzle." - Massad Ayoob quoting Col. Jeff Cooper
whenmonkeysfly is offline   Reply With Quote

 
  
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 16:52.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 1,183
353 Members
830 Guests

Most users ever online: 2,672
Aug 11, 2014 at 2:31