Welcome to the 10mm Reloading Forum!!!! - Page 2

redskyzatknight · 08-25-2003, 23:10

yeah!!

It's for real! Now, for the first dumb ? - For a beginner wanting a quality startup reloading press, what to go for? I think Dillon ***? what else would one need to roll their own? This is so cool, I have a whole room waiting.

08-26-2003, 07:27

Quote:

Originally posted by redskyzatknight
yeah!! It's for real! Now, for the first dumb ? - For a beginner wanting a quality startup reloading press, what to go for? I think Dillon ***? what else would one need to roll their own? This is so cool, I have a whole room waiting.

I have a Square Deal B I got used off ebay, and have not regretted it one bit. Unless you plan on doing rifle cartridges, ithe SDB is an inexpensive setup. I'm loading 45ACP, 40 & 10mm. I splurged and bought a 2nd 40/10 die set 'cause it IS a pain in the rear to adjust between 40 & 10. Not much on paper, but a hassle in practice ;g

Steve

***G33*** · 08-26-2003, 10:17

;+

Jumper · 08-30-2003, 09:11

Quote:

Originally posted by redskyzatknight
yeah!! It's for real! Now, for the first dumb ? - For a beginner wanting a quality startup reloading press, what to go for? I think Dillon ***? what else would one need to roll their own? This is so cool, I have a whole room waiting.

I have a Lee Loadmaster that loads 10mm and 45ACP just fine. You can probably pick up a used one less than $100.

21 shooter · 09-22-2003, 21:15

I guess I missed the meeeting for this one. I am glad to see this forum up and running.

glock durban · 09-24-2003, 11:45

thank you for opening this forum,long over due.
let the safe fun begin.

pistolero6869 · 10-09-2003, 18:36

Just fired my new G-20 today! Trying to empty some of the 700 Rds of factory stuff I got with it cor-bons, PMC, winchester, blazer. I started with the Blazer to see where the brass was going. I really like it so far very powerful Handgun! I will be reloading for it so this should be a great forum. I need Brass!!! Shoot Safe GFM

Rigormootis · 10-13-2003, 21:40

...it's 'bout time. Let the learning begin!

VN350X10 · 11-23-2003, 15:00

I must of missed the meeting along with Make Mine a 10...Glad to see that this forum is finally a reality.

The G-20....What Darth Vader uses when he needs an EFFECTIVE sidearm.

Thanks to the folks that made this one happen. I'll be contributing the load data that we've developed over the years for IPSC/USPSA & IDPA competition, & also tell what DIDN'T work & why/what happened.

uncle albert

Alaska Bush Man · 05-25-2005, 15:27

Hello from the "The Last Frontier" just bought a Glock 20 1st Gen in excellent condition....like new. Plan on using it as home protection pistol and pack gun on the bear stand. Does anyone have some favorite handloads for hunting. I plan on using the 190 FPJ Sierra bullet. Thanks

Glolt20-91 · 08-23-2005, 17:18

Well I'm new to Glocks, bought my first about two months ago and the 10mm has to be one of the best kept secrets that many overlook.

Now that I've been playing with Blue Dot for awhile I can check other threads and see if I've done things right. ;a

I bought a G20 with OD grips and it's pretty comfortable to shoot.

Adios,
Bob

urbanjunglist · 09-24-2006, 13:16

Why is it that the 10mm never really took off? The caliber is the best of all worlds condensed into one, what more can you ask for?

Glocker 4 Life · 09-28-2007, 16:44

I now know where much of my time is going to be

Got my G20 recently and now found a great place for reloading info. My Rock chucker is setup for 9mm, but that can be easily switched over

Great Forum

Scott

srfl · 09-28-2007, 21:38

A reloading forum for us 10mm fans???

Sweet!

I have some 175 grain loads I brewed in anticipation of getting my G20 back from Robar (only to be followed up with a trip to Bar Sto to get a match barrel installed).

Wiskey_33 · 10-02-2007, 07:23

Well,
I'm glad that this page is around. I'm sitting here waiting for my 550B to come in so I can start pumping out some 10mm. Anyhow, what's the best place online to order brass and bullets? I wanna get the powder/primers local to avoid HAZMAT fees. Anyhow, I'm thinkin' 150-180 grain FMJ's for plinkin' and some 180 Gold Dots for things that go bump in the night. Anyhow, thanks guys and I look forward to the suggestions.

Daryl in Az · 10-05-2007, 10:02

You can order brass direct from Starline. http://www.starlinebrass.com/

MidwayUSA also sells Starline brass for a few dollars more per 500/1000, and you can order bullets at the same time to possibly save on shipping costs.

Lots of others, I'm sure. If anyone knows of a cheaper place for either, I'd appreciate it too. I'm going to order brass and bullets pretty soon.

Daryl

mesteve2 · 05-13-2009, 17:37

Got some old data.

Unique and other old powders.

Let me know if interest.

jeremiahjj · 09-12-2009, 21:26

Is the 10mm forum still alive somewhere?

***MakeMineA10mm*** · 09-13-2009, 12:25

Quote:

Originally Posted by jeremiahjj

Is the 10mm forum still alive somewhere?

If you mean here at GT, yes, it's called "the 10 Ring" and it's just two forums above this one on the list of forums here at GT.

If you're talking about another website, I'm not sure. The only other 10mm website I look at regularly is the Bren Ten forum.

jeremiahjj · 09-13-2009, 14:57

Quote:

Originally Posted by MakeMineA10mm

If you mean here at GT, yes, it's called "the 10 Ring" and it's just two forums above this one on the list of forums here at GT.

If you're talking about another website, I'm not sure. The only other 10mm website I look at regularly is the Bren Ten forum.

Got it, and thanks! I guess I missed the 10 Ring. The Firing Line Forum has stuff for 10mm shooters/reloaders too. I'm finally getting set up -- bench is built, 4 lbs of powder (No. 9, 800X, HS6, etc.), primers and cases are ready. All I'm missing is the press, which some suggest might be helpful. That should be here in 2-3 weeks. It'll be a 550. Thanks again. See you over at the 10 Ring.

Denny · 04-02-2012, 09:31

I just finished my Glock 20 for hunting Now its time to RELOAD

ohio glock guy · 04-30-2012, 13:29

Hello to all glockers,
what's a good handload in 10mm,6inch pipe,deer hunting?
Any and all thoughts welcomed..

glockout · 06-12-2012, 07:53

I have been a member of GT for 5 years. Just found this forum. Was doing a search on the internet for 10mm forum and this one popped up. Glad I found it.

I have a 19,20,23,27.

Cwlongshot · 06-12-2012, 08:57

Quote:

Originally Posted by ohio glock guy

Hello to all glockers,
what's a good handload in 10mm,6inch pipe,deer hunting?
Any and all thoughts welcomed..

Get yourself a can of Longshot maybe 800X too. Then some 180/200g XTP or a WFN hard cast lead of 200g. Start loading!

Good luck,
CW

gunowner1 · 10-25-2012, 19:54

Almost got my reloading set up ready. I am going to start with 9mm. I did get 500 rounds of 10mm brass to start getting ready to reload 10mm in the near future. All I need to know is what type of bullets to buy. I just need bullets for punching paper.