Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 11-11-2010, 21:06   #1
feathers73
Senior Member
 
Join Date: May 2007
Location: Southeast
Posts: 180
Gen 1 Glocks

Why are Gen 1's so hard to find or am I missing something?
feathers73 is offline   Reply With Quote
Old 11-12-2010, 07:26   #2
Coogan
Original "G"
 
Coogan's Avatar
 
Join Date: Nov 2003
Location: Eastern PA
Posts: 824
1st Gen G17s were only made for a few years - and those years had VERY low production numbers compared to today. If I did my math correctly, there were only about 115,000 Glocks (G17, G18 and G19) made to the end of Gen 1 production worldwide.

Attrition - how many guns (not just Glocks) are lost to fire, flood, etc?

Finally, most guys that have older Glocks just keep them. I work in a shop and can tell you that for roughly every 10 used Glocks we get, 9 will have been made in the past 2 years.
__________________
USMCR 1997 - 2004
PAARNG 2011 - Present
Founder - Glock Collectors Club PA Glocker #39
Looking for G22 PE389US
Multiple Armorer Certifications
Coogan is offline   Reply With Quote
Old 11-12-2010, 08:01   #3
Quail Fat
Member
 
Quail Fat's Avatar
 
Join Date: Mar 2000
Location: Oklahoma
Posts: 4,435
A lot of the 1st gen Glocks were issued to Law Enforcement Agencies and were up-graded with new trigger bars, fps, firing pins and extractors. They were used and abused by the Police and eventually ended up on the Surplus Markets, which have long since dried up.

I go to gun shows all the time and when I do see a 1st gen they are almost always in fair condition. A few years ago I found a NIB AA*** Glock 17 for selling for $400. Some old man had it, and I would have bought it but at the time I didn't have any money with me. A like new minty Glock 17 gen 1 can sometimes be found on Gunbroker.com

I happen to own a minty gen 1 that has all it's original components. It has the black serial number plate, all the black guts and does not have the lanyard hole in the grip. I baby this gun and occasionally will take it out of the safe and shoot it at the range.
Quail Fat is offline   Reply With Quote
Old 11-12-2010, 08:43   #4
Bullpup adict
Member
 
Join Date: Oct 2010
Location: Michigan's Thumb
Posts: 22
Gen 1 G17

Does this mean I should hang on to my G17 serial ARM053US.

Does it make it worth more than the $489.00 I paid for it?

Bull
Bullpup adict is offline   Reply With Quote
Old 11-12-2010, 15:38   #5
MakeMineA10mm
Lifetime Membership
300AAC brass
 
MakeMineA10mm's Avatar
 
Join Date: Feb 1999
Location: Central Illinois
Posts: 7,871
Blog Entries: 13
Quote:
Originally Posted by Bullpup adict View Post
Does this mean I should hang on to my G17 serial ARM053US.

Does it make it worth more than the $489.00 I paid for it?

Bull
No, that's a Gen 2 pistol. Gen 1s were over before they got half-way through the 2-digit alpha prefixes.

The value on your pistol depends on a lot of things, including, where in the country you are, the condition, and if it still has everything with it. In my part of the country, a used Gen-2 G17 is a $400 gun, TOPS (in perfect, near-new shape with all accessories).
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Looking for: FBI 100yr, Bell Helo, FOP Lodge1, Kiowa Warrior, SCI, and any new/unknown-to-me commemoratives.
MakeMineA10mm is online now   Reply With Quote
Old 11-12-2010, 15:41   #6
Bullpup adict
Member
 
Join Date: Oct 2010
Location: Michigan's Thumb
Posts: 22
Thanks for the reply... I don't intend on selling it or my other 3 glocks. (G17,G18,G26,G27)

Bull
Bullpup adict is offline   Reply With Quote
Old 11-12-2010, 20:36   #7
tcglenn63
Member
 
tcglenn63's Avatar
 
Join Date: Mar 2009
Posts: 84
Quote:
Originally Posted by Bullpup adict View Post
Thanks for the reply... I don't intend on selling it or my other 3 glocks. (G17,G18,G26,G27)

Bull
So you own a G18, and you're worried about getting a first gen G17???
or was that a typo???
__________________
“Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety”.
Benjamin Franklin
tcglenn63 is offline   Reply With Quote
Old 11-12-2010, 20:48   #8
Bullpup adict
Member
 
Join Date: Oct 2010
Location: Michigan's Thumb
Posts: 22
OOPS! ITS A TYPO i HAVE A G19

SORRY IT WAS FAT FINGER SYNDROME...
Bullpup adict is offline   Reply With Quote
Old 11-13-2010, 13:39   #9
BamaTrooper
Almost Done
 
BamaTrooper's Avatar
 
Join Date: Sep 2006
Location: football heaven
Posts: 11,803
Send a message via Yahoo to BamaTrooper
Quote:
Originally Posted by Quail Fat View Post
A lot of the 1st gen Glocks were issued to Law Enforcement Agencies and were up-graded with new trigger bars, fps, firing pins and extractors. They were used and abused by the Police and eventually ended up on the Surplus Markets, which have long since dried up.

I go to gun shows all the time and when I do see a 1st gen they are almost always in fair condition. A few years ago I found a NIB AA*** Glock 17 for selling for $400. Some old man had it, and I would have bought it but at the time I didn't have any money with me. A like new minty Glock 17 gen 1 can sometimes be found on Gunbroker.com

I happen to own a minty gen 1 that has all it's original components. It has the black serial number plate, all the black guts and does not have the lanyard hole in the grip. I baby this gun and occasionally will take it out of the safe and shoot it at the range.

Unless they are SWAT, etc... or the rare "shooter" police officer, you would be hard pressed to find an well used police gun. Abused? Most of them never come out of the holster. I can't speak to the cleaning aspect of abuse, but our 2nd Gen G22s are rocking fine since '97.

ETA- I have an AH and an AL 1st Gen gun. one was given to me and the other was purchased at a pawn shop about 3 years ago for 300ish.

Both have been upgraded, but I kept the original guts on one of them. The other was done before I got it. I don't baby them, I just have so many Glocks, they never get shot. I think I might get a threaded barrel and suppressor for one of them.

As an aside, I think the first few thousand guns brought in started around the AE AF serial ranges since they were closer to the door when shipping began.
__________________
"Some people learn by words, some people learn by consequences, some people can't learn." CNS

Last edited by BamaTrooper; 11-13-2010 at 13:50..
BamaTrooper is offline   Reply With Quote
Old 01-30-2011, 22:36   #10
Gator Monroe
Senior Member
 
Join Date: Jan 2011
Location: Oak Run Ca.
Posts: 3,302
Is there a poster here who has the earliest/oldest Gen 1 Glock 17 on the forum/board and has identified it's provenance and history ?
Gator Monroe is offline   Reply With Quote
Old 02-02-2011, 00:02   #11
MakeMineA10mm
Lifetime Membership
300AAC brass
 
MakeMineA10mm's Avatar
 
Join Date: Feb 1999
Location: Central Illinois
Posts: 7,871
Blog Entries: 13
Someone, somewhere, has "AA000US". There was a thread about the oldest Glock owned by a board member. I think if you use the search function on this forum, you will find it. If not, try searching all of Glock Talk with the search function up near the top of the page.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Looking for: FBI 100yr, Bell Helo, FOP Lodge1, Kiowa Warrior, SCI, and any new/unknown-to-me commemoratives.
MakeMineA10mm is online now   Reply With Quote
Old 08-29-2011, 23:28   #12
dooga
New to Glocks
 
dooga's Avatar
 
Join Date: Mar 2011
Location: Arlington, VA
Posts: 578
Blog Entries: 1
Send a message via AIM to dooga Send a message via MSN to dooga Send a message via Yahoo to dooga Send a message via Skype™ to dooga
My new-to-me Gen 1 G17

I picked one up for a tick over $300 and I believe it is a decommissioned DC cop side arm. Serial number is DCxxxUS which is not AA000US but it's pretty old and surely a Gen 1, right?

Are there anything I should check out and maybe replace if I want to breath a little life into it? Anything I should check, change, replace? Fires fine now but I can't hit the side of a barn whereas I can shoot the hell out of my G23 Gen 3.

Is it me or is the Gen 1 a little loosey goosey, to use the technical term. Or maybe I just have not put enough time and ammo through her at the range and she's perfectly accurate as-is.

All the internals are black so maybe it is all original. The only thing I have done so far is replace the 8# NY trigger with a 5.5#, though I want to move to a 3.5# on both this Gen 1 and the G23.

Anyway, sorry to prattle on, but I was happy to find this gem at the gun show.
dooga is offline   Reply With Quote
Old 08-30-2011, 06:15   #13
MakeMineA10mm
Lifetime Membership
300AAC brass
 
MakeMineA10mm's Avatar
 
Join Date: Feb 1999
Location: Central Illinois
Posts: 7,871
Blog Entries: 13
Gen 1s are very easy to identify with their smooth, pebbled grip including backstrap and frontstrap. IMO, that's more definitive than a serial number, but I suppose a Gen 1 frame could be replaced with a Gen 2, especially if it was a police gun. (Glock would change out the frame for a nominal charge back then.). So, you could have a Gen1 serial numbered gun without the gen1 frame...

If you still have black parts, though, I rather doubt that's the case, since Glock would have changed out those trigger group parts for free when they saw them. If you want to shoot it and changing trigger parts to non-original is on the list of changes, I'd get a trigger parts upgrade kit and sell the old parts here to a collector.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Looking for: FBI 100yr, Bell Helo, FOP Lodge1, Kiowa Warrior, SCI, and any new/unknown-to-me commemoratives.
MakeMineA10mm is online now   Reply With Quote
Old 09-01-2011, 22:46   #14
.38 super
Observer
 
.38 super's Avatar
 
Join Date: Aug 2010
Location: Florida
Posts: 1,859
I picked up a G17 slide for $250 from Ed's Public Safety from Georgia, should be made around 1988, matching barrel...
I believe, Lone Wolf refinished the bluing for around $60 ...
I shoot it with my G22 frame, never had a single hickup ...
Here some pix:

Before:

Glock Collector's Club

After:

Glock Collector's Club

Glock Collector's Club
__________________
Μολων λαβε !
____________________________
Florida Glockers Club #1964
Калашников Клуб №1000

Last edited by .38 super; 09-01-2011 at 22:47.. Reason: forgot to add the price ...
.38 super is offline   Reply With Quote
Old 09-02-2011, 09:34   #15
MakeMineA10mm
Lifetime Membership
300AAC brass
 
MakeMineA10mm's Avatar
 
Join Date: Feb 1999
Location: Central Illinois
Posts: 7,871
Blog Entries: 13
And people gripe about Glock's not changing ('til the Gen 4 came about), but look at how cool it is that a Gen 1 slide/barrel fits on a Gen 3 G-22 frame so well that it looks like it was made for it!

That's a nice set up .38Super...
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Looking for: FBI 100yr, Bell Helo, FOP Lodge1, Kiowa Warrior, SCI, and any new/unknown-to-me commemoratives.
MakeMineA10mm is online now   Reply With Quote
Old 09-02-2011, 11:06   #16
.38 super
Observer
 
.38 super's Avatar
 
Join Date: Aug 2010
Location: Florida
Posts: 1,859
Quote:
Originally Posted by MakeMineA10mm View Post
And people gripe about Glock's not changing ('til the Gen 4 came about), but look at how cool it is that a Gen 1 slide/barrel fits on a Gen 3 G-22 frame so well that it looks like it was made for it!

That's a nice set up .38Super...
Thanks, actually the whole setup goes like this:

Glock Collector's Club

I am not Glock fan by any means, for me all weapons are just tools, this is my understanding, but I also think that everyone should have a Glock, just as everyone should have a AR and AK if you would...
I'm a SA/1911 type guy but I got the Glock to see what is all that hype about. I'm not going to bother you with the findings, bottom line, I would never carry a Glock without polishing some parts and bringing the trigger to some normal level, of course I could be wrong, bit hey - it doesn't work for me as a sum of features the way it is when is in stock configuration...
So I went online, got the G22 from Gunbroker, than Nate from Ed's Public safety was so nice to find the gen1 G17 slide for me and about several month ago I got the .357sig barrel from Glockmeister... I love the setup, I think Glock is most succesful in G17 platform ( and G19 but I do not like compact guns generaly...), G22 is a good service weapon, absolutely love the .357sig but I dont think this round is suitable for home defence or any other defence...imho... So this is how I got in to Glocks, they are good guns...companywise, I cannot support such statement, but again - maybee I'm wrong...

Glockmaister initially sent a wrong, ported barrel, than he sent the right-one, what I've done on the G22 is - polishing whatever needed, installed: tungsten guide rod with 15# spring, Ghost 3.5# connector, Glock night sights (Nate was so kind to do it before they ship the gun, good place to buy Glocks, highly recommended!), I got the Pearce gripp for control, I can go without it, but the important thing for me is to be able to do most of the things w the gun with one hand, so that's why I keep it... I replaced all the pins, the old-ones were too loosed, believe or not... Longer slide stop, aftermarket (wider) slide lock because I cannot feel the stock-one out on the field, dirty, sweaty, especialy with gloves on...same reason for the longer mag release...what else...the beavertail...that's about everything with the G22.
G17 slide fits perfectly, never had any problems with it, nor with the .357barrel setup. I have been ising the G22 mags for .357sig but I had very few, probably 3-4 out of 5-600 rounds, FTF's and found out that I have to get a G31 mags to get a reliable feeding...Not a big deal...Never had problems with the ejector of the G22 frame paired with the G17 slide, the ejectors are are diferent between frames but in my case I got steady ejection, all in one direction, flying out far from the gun.
I cannot thing about anything else...Oh, yeah - I had several non-fired primers, only with russian Tula ammo, green laquer steel shell, that's it.
I'm very happy with the "Glocks" that I got, would I biu a Gen4 - probably yes, if I got a steal-deal, otherwise - not, and I'm a guy that thinks that the new models are generaly better than older-ones, but there are too many things going on with the gen4 to look at one right now, otherwise I would be interested in gen4 compact gun, probably in .40S&W or .45acp...

Here is the fit of that .357sig barrel:

Glock Collector's Club Glock Collector's Club Glock Collector's Club
__________________
Μολων λαβε !
____________________________
Florida Glockers Club #1964
Калашников Клуб №1000
.38 super is offline   Reply With Quote
Old 10-08-2011, 17:48   #17
dooga
New to Glocks
 
dooga's Avatar
 
Join Date: Mar 2011
Location: Arlington, VA
Posts: 578
Blog Entries: 1
Send a message via AIM to dooga Send a message via MSN to dooga Send a message via Yahoo to dooga Send a message via Skype™ to dooga
I have a 1988 Gen 1 G17. But I got it from a gun show in Northern VA for only $320. DC was one of the first adopters if the Glock 17 so I guess they're plentiful used. Nice gun and accurate.
__________________
Gen 1 G17, LWS32, CZ 452 Special Military Training

Last edited by dooga; 05-18-2013 at 10:46..
dooga is offline   Reply With Quote
Old 05-18-2013, 10:45   #18
dooga
New to Glocks
 
dooga's Avatar
 
Join Date: Mar 2011
Location: Arlington, VA
Posts: 578
Blog Entries: 1
Send a message via AIM to dooga Send a message via MSN to dooga Send a message via Yahoo to dooga Send a message via Skype™ to dooga
Quote:
Originally Posted by Gator Monroe View Post
Is there a poster here who has the earliest/oldest Gen 1 Glock 17 on the forum/board and has identified it's provenance and history ?
Mine is DC395.
__________________
Gen 1 G17, LWS32, CZ 452 Special Military Training
dooga is offline   Reply With Quote
Old 05-30-2013, 20:41   #19
Lee-online
Mul-ti-pass
 
Lee-online's Avatar
 
Join Date: Mar 2006
Location: Susquehanna Valley, PA
Posts: 1,869
Quote:
Originally Posted by dooga View Post
Mine is DC395.
I have CZ***. Only a month older than yours.
__________________
"Educate and inform the whole mass of the people... They are the only sure reliance for the preservation of our liberty."

—Thomas Jefferson
Lee-online is offline   Reply With Quote
Old 06-01-2013, 08:17   #20
dooga
New to Glocks
 
dooga's Avatar
 
Join Date: Mar 2011
Location: Arlington, VA
Posts: 578
Blog Entries: 1
Send a message via AIM to dooga Send a message via MSN to dooga Send a message via Yahoo to dooga Send a message via Skype™ to dooga
Quote:
Originally Posted by Lee-online View Post
I have CZ***. Only a month older than yours.
Cousins, then.
__________________
Gen 1 G17, LWS32, CZ 452 Special Military Training
dooga is offline   Reply With Quote

 
  
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 05:35.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 743
148 Members
595 Guests

Most users ever online: 2,672
Aug 11, 2014 at 2:31