GlockTalk.com
Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.
Reply
 
Thread Tools Display Modes
Old 07-04-2011, 11:34   #76
Walk Soft
Senior Member
 
Walk Soft's Avatar
 
Join Date: Jun 2011
Location: Kentucky
Posts: 1,260
Quote:
Originally Posted by Bowtie View Post
Its because it is possible to screw a connector up with just a dremel and pollish. Taking that felt wheel to an edge in the wrong place can slightly change an angle at thats all it takes to go FA. MANY have done it.

I'm not saying I dont do it because I do and have done many for my self as well as many other.

To make a blanket statement that it CANT happen with just a felt wheel and some rouge is just plain ignorant.
I guess I should have said is if you can follow instruction,you couldn't do damage.You leave a right angle a right angle.
Walk Soft is offline   Reply With Quote
Old 07-09-2011, 15:25   #77
applevalleyjoe
Member
 
applevalleyjoe's Avatar
 
Join Date: Jun 2008
Location: Mohave Desert, CA
Posts: 83
Blog Entries: 1
Quote:
Originally Posted by curtiswr View Post
Thanks...real handy info. Can anyone recommend someone who is adept at this to perform this for a decent price?
applevalleyjoe is offline   Reply With Quote
Old 11-25-2011, 11:11   #78
SCmasterblaster
Senior Member
 
Join Date: Sep 1999
Location: Hartford, Vermont
Posts: 15,846
I looked at the web site very carefully, and I failed to see any description of what is in the tube and what is it used for.
__________________
Gun Ownership Offers Freedom in Many Dimensions
SCmasterblaster is offline   Reply With Quote
Old 04-04-2012, 08:24   #79
aforster
Registered User
 
Join Date: Apr 2012
Posts: 9
I had heard of this trigger job sometime ago, and when I saw the video I did the work (with a dremmel) on one of my glocks. I didn't feel much change in either the trigger weight or how smooth it is.
In my opinion, if you want a smoother trigger (without making it lighter), I would recommend a titanium firing pin satefy plunger (glockstore have them). That will make your trigger A LOT more smoother while keeping the same weight.
aforster is offline   Reply With Quote
Old 04-04-2012, 18:33   #80
Firecop203
Senior Member
 
Join Date: Aug 2004
Location: Oklahoma
Posts: 555
I got burned in a gun deal not long ago. The used Glock 17 I purchased had one of these famous trigger jobs done to it and the previous owner didn't know what he was doing. The first time I shot it, I barely touched the trigger and it went off. WAY too light. I took it apart to check it out and found all the "polishing" that had been done. I wasn't told that there had been any work done to it.

I had to replace all the parts that had been "polished" before it would work to my satisfaction.

Two morals of the story.

Don't mess with it if you don't know what you are doing! Buyer Beware!
__________________
“Neither cold, nor darkness will deter good people from hastening to the dreadful place to quench the flame. They do it not for the sake of reward or fame; but they have a reward in themselves, and they love one another.”
Benjamin Franklin
Firecop203 is offline   Reply With Quote
Old 04-25-2012, 14:27   #81
DCMG21
Registered User
 
Join Date: Apr 2012
Posts: 1
Polish just polish

Outdoor Hub mobile, the outdoor information engine
DCMG21 is offline   Reply With Quote
Old 05-01-2012, 21:27   #82
OlliesRevenge
Senior Member
 
OlliesRevenge's Avatar
 
Join Date: Apr 2012
Location: WA
Posts: 577
Dremel user

I like the suggestion of using a 3 way nail polish / file. I'll have to try that. I have handled these in the past and it seems to me they might be more akin to using a stone than simply polishing... but i"m no expert.

I have used my Dremel tool, the felt buffing wheel, and Flitz compound on several of my Glocks with only positive effects.

I have to wonder if some of the Dremel hack jobs being referenced involved the grinding wheel. I feel like you'd really have to work hard to screw it up with the soft wheel & polishing compound.
__________________
Good men must not obey the laws too well.
~Ralph Waldo Emerson

Any fool can make a rule, and any fool will mind it.
~Henry David Thoreau

Remember always: The government is not the country!
OlliesRevenge is offline   Reply With Quote
Old 07-14-2012, 22:14   #83
CR500
Member
 
CR500's Avatar
 
Join Date: Jul 2012
Location: Arizona
Posts: 29
Quote:
Originally Posted by troy96 View Post
You obviously lost something in translation. Butch didnt say dont do the job, but dont do it with a Dremel because they take too much off.

Enhancing "perfection" is not blaming the gun.

But I dont blame you for your misunderstanding. Its only human nature to grab hold of something so you can try to feel superior and demean others thus feeling better about your own shortcomings.
__________________
ΜΟΛΩΝ ΛΑΒΕ
CR500 is offline   Reply With Quote
Old 07-15-2012, 00:30   #84
NEOH212
Diesel Girl
 
NEOH212's Avatar
 
Join Date: Mar 2008
Location: North East Ohio
Posts: 8,810
Quote:
What exactly is the .25 trigger job?
Unnecessary.

Your Welcome.
__________________
When we do hit it we hit it out of the park and send it over to China as quickly as possible to cheapen it and sell it.
NEOH212 is offline   Reply With Quote
Old 08-05-2012, 12:46   #85
et45
Senior Member
 
Join Date: Mar 2006
Location: Chattanooga,Tn
Posts: 111
A waste of time unless your a noob and want to detail strip and clean your Glook for the first time.
et45 is offline   Reply With Quote
Old 08-18-2012, 21:45   #86
Bluescot
Senior Member
 
Bluescot's Avatar
 
Join Date: Apr 2012
Location: Idaho
Posts: 208
I did the Fitz and cotton swab job on a couple of Glocks.

Ended up getting them nice and clean and shiny with only a very slight reduction in the pull weight of the trigger but did seem to be a whisper smoother.
Bluescot is offline   Reply With Quote
Old 12-15-2012, 23:25   #87
canadiantbone
Registered User
 
canadiantbone's Avatar
 
Join Date: Nov 2012
Location: Abby
Posts: 8
I noticed the diference more doing the polishing to my 1911 more than my Glock
canadiantbone is offline   Reply With Quote
Old 02-17-2013, 19:48   #88
Matteo
Registered User
 
Join Date: Jan 2011
Posts: 2
I don't know if it was mentioned, but using a dremel with cloth wheel and auto wax with light pressure on low speed does a fine job quickly and will not remove any material.
Matteo is offline   Reply With Quote
Old 05-31-2013, 14:38   #89
Glock+2
Senior Member
 
Glock+2's Avatar
 
Join Date: Mar 2009
Posts: 877
Should you do a .25 trigger job?

1. NO - if you don't understand
2. NO - if you don't know what each and every part does
3. NO - if you believe everything written
4. NO - if you think you will screw it up
5. NO - if you believe a cotton swab is better and as fast as using a dremel
6. NO - if your buddy says so & you believe him
7. NO - if you believe the way it is new is best
8. NO - if you think I am wrong
9. YES - if you

All of my Glocks have been improved working on the triggers
Glock+2 is offline   Reply With Quote
Old 08-31-2013, 13:00   #90
Roger1079
Senior Member
 
Join Date: Mar 2008
Location: South FL
Posts: 1,738
I can honestly say that using a dremel on low speed with a felt polishing wheel and Flitz polish, you would have to be a real idiot to remove material. That being said, the only difference I felt polishing the connector, trigger bar, safety plunger, and firing pin lug was that the trigger take up was considerably smoother however the break of the trigger still felt the same to me. Granted, I could be wrong as I did not measure trigger pull weight with a scale.

I never bothered to do this on any Glock beyond my G34 as all it is really doing is accelerating the wear process that will happen naturally of the course of the pistols life and although it was quick and easy, it didn't seem that the gain was worth it. I am continuing to work on trigger jobs on my other Glocks one round at a time.
Roger1079 is offline   Reply With Quote
Old 08-31-2013, 22:59   #91
Brian Lee
Drop those nuts
 
Brian Lee's Avatar
 
Join Date: Jul 2008
Location: Up a tree.
Posts: 7,429
The 25 cent trigger job is possibly the most widely misunderstood thing we talk about on GT IMO. It's also the most commonly screwed up thing that most people don't do right.

The real idea of it is this:

Glock trigger bars are made by stamping dies, and all stamping dies leave rough side edges on all parts that are made that way. This includes the trigger sear on a Glock trigger bar. On most nice guns the trigger sear is a nicely machined, smooth surface, because it's a totally machined part, but on a stock Glock, it's as rough as a corn cob since it was die stamped. The purpose of the 25 cent trigger job is to replace that rough die stamped surface with a FLAT smooth surface, to improve the smoothness of the trigger pull. And if done correctly, it certainly does improve the feel of a Glock trigger, but it only works right if you end up with that surface looking FLAT, WITH THE SHARP EDGES STILL SHARP, as they originally were from the factory, and as they have to be, to keep the proper sear engagement with the lug on the striker.

But that's where the popular misunderstanding is.

To put that sort of finish on the trigger sear, you must remove a tiny bit of the rough stamped edge until it looks like a flat machined surface under a magnifying glass, (it does not need to shine) and this is best done with stones or a very fine file, or if you have a machine shop you can put the trigger bar in a milling machine and remove about .002/.005" of an inch and you'd have it done as perfectly as any factory could have done it. The operation of the gun is not affected by removing such a small amount of material because all it does is change the exact position of the trigger by about .005" and your finger will never feel the difference, and it's also well within the original manufacturing tolerances anyway, so it's silly to be afraid of removing such a small amount of metal from that particular surface. It just doesn't hurt a thing

Where people really screw up by thinking that the 25 cent trigger job can be done by simply polishing it with a Dremel and a buffing wheel, and that's just not true at all. A buffing wheel DOES NOT accomplish this and in fact gives you an entirely different result that is not advisable at all. A rough surface that's been buffed until it shines IS NOT the same thing as a surface that's been machined flat & smooth, and therefore needs no "shine" because of it's flatness & smoothness, yet the buffing wheel crowd doesn't seem to understand that. Buffing wheels round off all the edges that are supposed to stay sharp if your sear engagement is to remain correct and keep the gun operating safely.

If you do the job correctly, and with the right tools, you end up with a FLAT surface that still has sharp corners and it does not need to be even the slightest bit shiney at all. It's the overall flatness and smoothness which improves trigger pull while keeping the gun safe, NOT THE SHINE!!! If Glock were to machine that one surface in a milling machine at the factory instead of leaving it rough from the stamping die, it would not be shinny, and shining it with a buffing wheel would bring no further improvement at all. The surface you can achieve with stones & files (or the side of an end mill) is more than smooth & shiney enough!!

So there's a popular misunderstanding right there. In their fear of "removing too much metal", people resort to buffing wheels which do not remove metal from the right place. Instead of improving the flatness & squareness of the trigger sear, they only round off the corners that need to be sharp. So a Dremel actually DOES remove too much metal, and FROM EXACTLY THE WRONG PLACES, while not removing any of the real surface roughness at all!!!

I'm sorry people are going to feel insulted, but in most cases, (most, not all) Dremels & buffing wheels are for non-engineers & non-gunsmiths who know nothing about how to do precision work on tiny metal parts. At best, the buffing wheel route does hardly any good compared to doing the job right. At worst, those buffed-shiney & rounded-off edges can affect the safety of the gun by making the sear slip off the striker lug too easily when the trigger isn't pulled. In the worst cases, this can cause double taps with one trigger pull, or even full auto operation for as long as the trigger is held back far enough to hold the safety plunger in the upward position.

To do the job right requires much more skill time & effort than going at it with a Dremel. That's why I call my version the 25 dollar trigger job. Unless you're just flubbing it up with a Dremel, it takes a lot more than 25 cents worth of a man's time & skill. The Dremel version should be called the 2 cent trigger job.

Unless you think you have the skills to do it as I've described, I strongly suggest people leave it in stock (pronounce that SAFE) condition rather than round off everything sharp with a Dremel. That's just a dead wrong thing to do to the trigger sear on ANY gun.


Dremel fans, send hate mail now......
Brian Lee is offline   Reply With Quote
Old 08-31-2013, 23:09   #92
Brian Lee
Drop those nuts
 
Brian Lee's Avatar
 
Join Date: Jul 2008
Location: Up a tree.
Posts: 7,429
Quote:
Originally Posted by OlliesRevenge View Post
I have to wonder if some of the Dremel hack jobs being referenced involved the grinding wheel.
Probably not. A buffing wheel is all it takes to screw things up horribly.....


Quote:
Originally Posted by OlliesRevenge View Post
I feel like you'd really have to work hard to screw it up with the soft wheel & polishing compound.
Actually because all you have to do is round off sharp corners to cause problems, a buffing wheel is in fact one of the easiest tools in the world with which to totally ruin a trigger bar and make the gun unsafe. The softness of buffing wheels is precisely what prevents you from being able to keep the sharp corners sharp.

I admit Dremels have their uses, even on guns, but this particular surface on this particular part is NOT a job for a Dremel.

Last edited by Brian Lee; 08-31-2013 at 23:12..
Brian Lee is offline   Reply With Quote
Old 08-31-2013, 23:18   #93
Brian Lee
Drop those nuts
 
Brian Lee's Avatar
 
Join Date: Jul 2008
Location: Up a tree.
Posts: 7,429
Quote:
Originally Posted by Walk Soft View Post
I guess I should have said is if you can follow instruction,you couldn't do damage.You leave a right angle a right angle.
Correct. You are leaning in the right direction here, but not far enough.

It's also that the sharp corners above and below that right-angled surface MUST stay sharp, and this is impossible to do with buffing wheels. Buffing always rounds them off to some extent, even if you must use magnification to see it.
Brian Lee is offline   Reply With Quote
Old 08-31-2013, 23:35   #94
Brian Lee
Drop those nuts
 
Brian Lee's Avatar
 
Join Date: Jul 2008
Location: Up a tree.
Posts: 7,429
Quote:
Originally Posted by Frmboybuck View Post
Not if you use your brain doing it. Thats why its called buffing, not grinding. If you have some wits about you, the Dremel works better than anything

Sorry, but you're 100 percent wrong and Butch was 100 percent right. You seem to have missed his earlier point about things getting too rounded off. If you didn't see rounded off corners after using a buffing wheel, then your eyes are bad and you should look again with magnification.

It's impossible to keep the corners sharp with a buffing wheel simply because they are SOFT and roll over the edges of anything you buff with them.
Brian Lee is offline   Reply With Quote
Old 09-02-2013, 10:55   #95
Brian Lee
Drop those nuts
 
Brian Lee's Avatar
 
Join Date: Jul 2008
Location: Up a tree.
Posts: 7,429
I have to add a correction in something I said above:

"The operation of the gun is not affected by removing such a small amount of material because all it does is change the exact position of the trigger by about .005" and your finger will never feel the difference"

That's incorrect. I don't know what I was thinking at the time. The mechanism doesn't work that way, and the exact position of the trigger isn't changed by removing a little steel on the back end of the trigger bar. It's the exact amount of pre-load on the striker spring that's altered because it gets reduced by the .003" or what ever amount you took off. For a spring that gets way over a 1/2" of pre-load before it's released, that's nothing to care about.
Brian Lee is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 17:42.



Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 1,250
411 Members
839 Guests

Most users ever online: 2,244
Nov 11, 2013 at 11:42