GlockTalk.com
Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 02-03-2010, 14:44   #1
polizei1
It WAS Quack
 
polizei1's Avatar
 
Join Date: Feb 2009
Location: Cincinnati, OH
Posts: 1,167
Send a message via AIM to polizei1
Need a Good Knife - Which One!?

Hey guys, I searched around a bit, but I would like some more direct answers. In short, I may be deploying soon, and I want a better knife to take with me. Right now I carry a S&W Extreme Ops:

The Cutting Edge

It's an ok-knife, but it's cheaply made and you can tell. It also tends to get dull very quick and the safety isn't strong at all. So, I need a new knife...one of quality.

Requirements:

1. Name brand, reputable company.

2. Must be a push-button auto

3. Must be sharp, and stay sharp relatively long

4. Has to be MEDIUM size. I don't want a small or large knife. This will be carried in my pocket. The blade cannot be longer than 3". I think that's the carry rule.

5. Must be right-hand/right pocket

6. Has to be black

7. Blade/knife has to be strong, I cannot have something cheap falling apart on me

8. It has to be a folding knife

The main use of this knife will be EDC, opening boxes, MRE's, or whatever I need. It also HAS to be capable of SD if needed. I've checked out some Benchmade's, but there is soooo many to choose from.

I heard Benchmade, Spyderco, Kershaw, Surefire are all good. I just need some opinions. Please, if you have a valid opinion, very well, but I'm looking for PERSONAL experience ONLY, preferably from military/LEO.

Now, price...I'm not too crazy on the price, as I'll probably be using it everyday, and when I get back, it will continue to be my EDC knife. I would like to keep it around or under $200.

Thanks,
-Cody

Last edited by polizei1; 02-03-2010 at 14:47..
polizei1 is offline   Reply With Quote
Old 02-03-2010, 15:08   #2
Hackett
Senior Member
 
Hackett's Avatar
 
Join Date: Mar 2009
Location: Houma, LA
Posts: 1,693
Send a message via AIM to Hackett
You'll find a lot of people prefer certain brands.

My suggestion is to figure out what you'll use it for, what conditions it will be used in and select the type of steel you like that fits that purpose.

I personally do a lot of hiking in wet conditions and prefer AUS8 steel for is corrosion resistance and hardness without being brittle. I have been carrying a CRKT ABC Operator lately while hiking and am happy with it, but itis a bit large for everyday. For EDC I have used Gerbers (that come in boxes, not plastic), Spydercos, Kershaws, and Case knives which are all easily found and have been happy with them all.

That said, if you are wanting a knife that will last a long time, have minimal issues, you have a lot of good choices.

CRKT makes a knife called the Edgie that is self sharpening but the blade is not coated black.

Kershaw makes some great assisted openers.
__________________
Beretta Club Member #1, Tactical Shotgun Club #1884,
1911 Owners Group #1884 (pending), Sig Club #1884, Florida Glocker #1884, 21 Club #1884, GTDS Life Member

Last edited by Hackett; 02-03-2010 at 15:11..
Hackett is offline   Reply With Quote
Old 02-03-2010, 21:59   #3
kayakjax
Member
 
kayakjax's Avatar
 
Join Date: Nov 2009
Location: Western Kentucky
Posts: 40
The Spyderco Military would be a good choice. It's not an auto, but is one handed opening. I'd think it'd be more reliable than an auto in tough conditions.
The blade is also a little longer than you wanted, but this is what it was designed for.



length overall 9 1/2" (241 mm) blade length 4" (102 mm) blade steel CPM-S30V
length closed 5 1/2" (139 mm) cutting edge 3 11/16" (94 mm) weight 4.2 oz (120 g)
hole diameter 9/16" (14 mm) blade thickness 5/32" (4 mm) handle material G-10
A cornerstone in Spyderco's Save and Serve line up, the Military Model came about after someone asked Spyderco's owner Sal Glesser, "If your son were going into the military what folding knife would you send him with?" For certain, it had to meet the requirements of a high-performance, light-weight folder designed for hard use.

To create an even more subdued blade we have blackened the blade with a BodyCote black matte coating. Since the steel is the spirit of the knife, CPM-S30V seemed the logical choice for the blade given its reputation for long-term edge retention and rust resistance. The 'Millie' has a modified clip-point blade coated in non-reflective black then laser cut with a 14 mm Spyderco Round Hole for quick deployment and for use with gloves. Texturing above the hole hold the thumb in contact with the blade's spine during cutting for confident control over the sharpened edge. The handle scales are G-10 with the lock's liner nested (inlayed) directly into the scale, pumping up lock strength without the addition of bulky liners. Spacers between the scales create a gap running the handle's full length exposing the inside workings for inspection and cleaning. The handle flares slightly at the front end creating a finger choil and at the butt end, which keeps the knife from slipping forward or backward in the hand while sawing or making tough or aggressive cuts. A contoured black metal clip is set for right-hand tip-down carry.

Made in Golden, Colorado U.S.A. Earth



If you ABSOLUTELY need a smaller knife, they make a smaller version, called the Para Military, that has a 3 3/32" blade.

length overall 7 7/8" (200 mm) blade length 3 3/32" (81 mm) blade steel CPM-S30V
length closed 4 3/4" (121 mm) cutting edge 2 15/16" (75 mm) weight 3.75 oz (108 g)
hole diameter 9/16" (14 mm) blade thickness 5/32" (4 mm) handle material G-10
The most awaited mid-sized survival knife of 2004. When Spyderco initially introduced our Military Model critics claimed it too large and more knife than the average user needed. Likewise, fans enthusiastically heralded the knife's big performance attributes. We arrive at the question knife manufacturers often ask themselves, "How do we satisfy both worlds and create a mid-sized knife that acts, cuts and performs like a larger knife?" Our answer was the Para Military.

The PM is two-thirds the size of the original Military Model. Its flat-ground CPM-S30V blade stretches 3-3/32" long with the Spyderco Round Hole generously sized at 14mm for gloved or large hands. Furrowing above the hole presents a positioning spot for the thumb that's texture, keeping slipping to a minimum. Nested into the G-10 scale is a top-seated Heavy duty rated Compression Lock. By inlaying (nesting) the lock we increase its strength without adding thick and bulky liners. The handle expands at the front and back for advanced grip retention, eliminating forward or backward sliding. All steel and curved to keep it pinned in a pocket, the clip attaches for right-hande tip-down carry. The ultimate mid-sized survival knife.

Made in Golden, Colorado U.S.A. Earth



I think either would be a good choice for EDC wherever you go.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
kayakjax is offline   Reply With Quote
Old 02-04-2010, 07:35   #4
polizei1
It WAS Quack
 
polizei1's Avatar
 
Join Date: Feb 2009
Location: Cincinnati, OH
Posts: 1,167
Send a message via AIM to polizei1
Sweet thanks, I'll check it out!

-Cody
polizei1 is offline   Reply With Quote
Old 02-04-2010, 09:21   #5
CAWDORRDL1
Senior Member
 
Join Date: Oct 2004
Location: New Jersey
Posts: 120
Good luck on your upcoming Deployment.

I have used the auto knives from Protech Knives, in particular the Tactical Response 3 model. (TR-3) I think that this will fit all of your criteria.

Another to look into is the Gerber/Emerson Alliance. No personal experience with this one, but if Emerson's name is on it, Which I own several of his knives, this one will also meet all of your requirements.

www.Protechknives.com

www.gerberstore.com

Hope this helps,
Roger
CAWDORRDL1 is offline   Reply With Quote
Old 02-04-2010, 09:27   #6
IMightBeWrong
Straw Dog
 
Join Date: Feb 2009
Posts: 848
Another vote of confidence for Spyderco. I'd also recommend looking into SOG, Benchmade, Columbia River, and even some Buck knives. Things made in the US are the way to go. S&W don't even make their own knives, they are all made in China with S&W slapped on them.
__________________
"An oversharpened sword cannot last long..." - Lao Tzu

"One of the greatest joys known to man is to take a flight into ignorance in search of knowledge..." - Robert Lynd
IMightBeWrong is offline   Reply With Quote
Old 02-04-2010, 11:44   #7
Legion Etrangere
Senior Member
 
Legion Etrangere's Avatar
 
Join Date: Jan 2010
Location: Western US
Posts: 163
If you go to the sand-box I would stay away from auto knives. They can clog with sand and not allow for a rapid presentation. There are double action autos on the market,but they are not cheap. They will open with a button or the often used thumb stud. Most really good double action knives are made buy custom knife makers. One I can think of is a guy named Gary Hicks out of Texas. Bob Kroft of Soldier of Fortune Magazine fame has carried one of Gary's double action autos all over the world. The knife must be 15-20 years old. Like a timex,still flicking. Hope this info helps.
Legion Etrangere is offline   Reply With Quote
Old 02-04-2010, 11:52   #8
Orion's Belt
Boost Addict
 
Orion's Belt's Avatar
 
Join Date: Feb 2010
Location: Pittsburgh, Pa
Posts: 365
If you're dead set on an auto, check out Microtech's line of knives. If you can go with a manual knife, the Spyderco Military is a good choice as previously mentioned. ETA: Emerson makes some quality manual folders as well.

Last edited by Orion's Belt; 02-04-2010 at 12:03..
Orion's Belt is offline   Reply With Quote
Old 02-04-2010, 16:32   #9
daddysnapmuffins
Senior Member
 
daddysnapmuffins's Avatar
 
Join Date: Jul 2008
Location: Downtown
Posts: 262
+1 on the Spyderco Military/Paramilitary. If you are set on an auto, then Benchmade, Microtech, or Spyderco.
daddysnapmuffins is offline   Reply With Quote
Old 02-06-2010, 09:11   #10
The Hawk
Senior Member
 
The Hawk's Avatar
 
Join Date: Aug 2008
Location: LaGrange, Ky
Posts: 1,204
There are several very good companies out there making knives that have already been recommended. You asked for personal experience from LEO or military. As a retired LEO I can tell you that although the S&W knives look good, they are not the quality that you want. I bought a S&W knife for myself and my partner a few years ago thinking they would be good EDC knives. Wrong. I ending up returning them and now carry Spyderco, Cold Steel, and SOG.
I know you said you want auto open, but based on my experience, I would not go that route. I have a couple auto open knives but end up carrying the one handed opening models.
My son is in the Marines and is being deployed this year. I got him a Cold Steel AK-47 a couple years ago. He has gotten a lot of use out of that knife and probably will take it with him to Afghanistan.
Be careful out there and thank you for serving.
The Hawk is offline   Reply With Quote
Old 02-06-2010, 21:20   #11
fingers
Senior Member
 
Join Date: Dec 2001
Location: Henderson Nevada
Posts: 194
If you find a Benchmade you like, there is a 40% discount available to Military/LEO's.

Give them a call if you are interested:

BENCHMADE Knife Company
300 Beavercreek Drive, Oregon City, OR 97045
Address all inquiries about your order to BENCHMADE:
1-800.800.7427. Ask for Customer Service.

For Auto knives you need to send them a copy of your Mil ID
__________________
Dave

Henderson, NV
fingers is offline   Reply With Quote
Old 02-07-2010, 19:08   #12
polizei1
It WAS Quack
 
polizei1's Avatar
 
Join Date: Feb 2009
Location: Cincinnati, OH
Posts: 1,167
Send a message via AIM to polizei1
Thanks everyone. As for right now, my deployment has been called off, but I would still like to get a good solid EDC knife. I'm looking more towards Benchmade right now because of the large selection and mainly the 40% off! Honestly I never knew there were so many good knife brands, it's really hard trying to pick even a brand, let a lone one particular knife.

And I have to say I'm not 100% on having an auto, as long as I can get a good spring-assist.

So, this brings a new question...which knife from the Public Safety lineup from Benchmade would you guys recommend? Based on my requirements minus the auto now. The length is important because I want to EDC the knife, color I want black, and what's everyones input on serrated vs. straight blade and tanto vs. regular rounded? I do have to say...after watching those "torture test" videos on the cold steel knives, they look pretty promising. Can anyone comment on Benchmade in regards to this? Are their knives sharp, etc. too?

Thanks,

-Cody

Last edited by polizei1; 02-07-2010 at 19:22..
polizei1 is offline   Reply With Quote
Old 02-07-2010, 19:31   #13
bambikilr
Senior Member
 
Join Date: Oct 2009
Location: Oklahoma
Posts: 423
hate my S&W as well, sorry i'm not LEO, but...i wouldn't do an auto either, cold steel, gerber, for me, but if I could get 40% off Benchmade, I would look really hard at them...JMO...good luck & thank you for your service
bambikilr is offline   Reply With Quote
Old 02-07-2010, 19:38   #14
Hawkwood
Senior Member
 
Hawkwood's Avatar
 
Join Date: Feb 2009
Location: Oregon
Posts: 1,074
I've carried at Benchmade Auto-Stryker 950 for the last 10 years. Tanto blade, partial serrations. It's been in absolutely some of the worst parts of the world...and mostly because I have loaned it to friends as they deploy. Each time it comes back to me with a couple more scratches on the finish...but keeps on working like it was brand new.

There are only a handful of products I can honestly say I would trust with my life - and now the life of my friends. Benchmade is one of them, and I say that without hesitation or equivocation. Worth every penny.
__________________
"A gun is a tool, ma'am. No better or no worse than any other tool...an axe, a shovel, or anything. A gun is as good or as bad as the man using it. Remember that."

Shane, 1953
Hawkwood is offline   Reply With Quote
Old 02-07-2010, 19:47   #15
frankmako
Senior Member
 
frankmako's Avatar
 
Join Date: Apr 2006
Location: From Parts Unknown
Posts: 879
i carry the benchmade auto reflex. they make a small and a larger one. i carry the small one in my pocket, it should fit your specks.
frankmako is offline   Reply With Quote
Old 02-08-2010, 11:47   #16
bobcat21
Member
 
Join Date: May 2006
Location: S.E. Wisconsin
Posts: 50
Quote:
Originally Posted by CAWDORRDL1 View Post
Good luck on your upcoming Deployment.

I have used the auto knives from Protech Knives, in particular the Tactical Response 3 model. (TR-3) I think that this will fit all of your criteria.

www.Protechknives.com
Protech makes a great product. I carry a TR-2 daily.
bobcat21 is offline   Reply With Quote
Old 02-08-2010, 15:08   #17
polizei1
It WAS Quack
 
polizei1's Avatar
 
Join Date: Feb 2009
Location: Cincinnati, OH
Posts: 1,167
Send a message via AIM to polizei1
Hey guys thanks for the responses. Right now I think I'm leaning towards the Auto Stryker 9100 (9500 Mini as well). Can anyone comment? Good, bad? Should I look at something else?

http://www.benchmade.com/products/9100

Or, the AFO 9052? http://www.benchmade.com/products/9052

They all seem like good choices, and all cost the same. I can't decide!

Oh, I also need some good recommendations on a sharpener please!

-Cody

Last edited by polizei1; 02-08-2010 at 15:32..
polizei1 is offline   Reply With Quote
Old 02-08-2010, 17:19   #18
pm666
Senior Member
 
Join Date: Feb 2009
Posts: 629
Hi guys - I need help too. One of my friend's sons is being deployed from the National Guard to Kuwait for a month and them to Iraq. He's pretty green. He doesn't have a knife and I want to buy him one. He says the blade can't be longer than 3 inches, but that's all I know. I don't know if he needs a folder or a fixed blade with a sheath. I know what I like in knives, but I really don't know what is good to have if you are in the military in Iraq. Side bar - we send our guys to Iraq and only allow a 3 inch blade - I don't understand. Tell me what I should get him, please.
I don't know what color - seems to me like you could easily lose a sand colored knife in the sand, but at the same time it camoflauge's in. I need really expert and really fast! Thanks in advance! Paul
pm666 is offline   Reply With Quote
Old 02-08-2010, 18:48   #19
polizei1
It WAS Quack
 
polizei1's Avatar
 
Join Date: Feb 2009
Location: Cincinnati, OH
Posts: 1,167
Send a message via AIM to polizei1
Uh, I don't think that 3" rule pertains to military. At least I don't think it does in the Marine Corps...we carry whatever the hell we want.

-Cody
polizei1 is offline   Reply With Quote
Old 02-08-2010, 18:58   #20
pm666
Senior Member
 
Join Date: Feb 2009
Posts: 629
Quote:
Originally Posted by polizei1 View Post
Uh, I don't think that 3" rule pertains to military. At least I don't think it does in the Marine Corps...we carry whatever the hell we want. -Cody
Thank Goodness! I know for sure he is in the National Guard and I know he's being deployed to Kuwait and then Iraq. It what capacity I really don't know, but all he's been doing is military training. How the heck do you send someone to Iraq with a maximum 3 inch blade...that just frightens me. Any suggestions as to which knife to get him?
pm666 is offline   Reply With Quote

 
  
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 12:59.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 1,046
260 Members
786 Guests

Most users ever online: 2,672
Aug 11, 2014 at 2:31