Glock 20SF Trigger Pull
I have modified my new G 20SF in hopes of lightening the trigger pull and limiting triiger travel. I installed the LWD-342 3.5 lb Connector, LWD-5406 Ultimate Trigger Stop, a Wolff 6 lb Striker Spring, and a Wolff 6 lb Trigger Spring. I now have virtually zero trigger travel after the firing pin releases but the overall trigger pull got heavier. I used a Lyman Digital Trigger Pull Gauge to measure and used two groups of 10 measurements to get a good average trigger pull benchmark before the change and after the change. Before trigger pull = 6 lbs 14.0 ouncesand after trigger pull = 8 lbs 3.5 ounces. What am I doing wrong or what else do I have to do to lighten the trigger pull?