EMP 9mm G10. First time to the range 150 rounds Federal 115gr FMJ not a single problem.
Second trip; 100 rounds of Federal 115gr FMJ, 50 of WWB 115gr FMJ, 30 HST 124gr +P JHP. Not a single failure of anykind.
Before taking to the range for the second time I removed the slide and gave two drops of FP-10 on each side of the rails. Back home I field stripped the pistol for cleaning, TW-25b grease on the rails, reassemble, inserted a magazine with one round of the HST 124gr JHP, released the slide and nose dive, tried again with another mag and another nose dive. Loaded a full mag and tried to load the round and nose dive - I said WTF, this gun was flawless at the range! Took the slide out and put two drops of FP-10 on both sides of the frame rails, reassembled the pistol, one round on the mag - perfect feeding. Loaded a full mag and hand cycled all rounds without problems. My conclusion is that the EMP does not like grease on the rails! I remember reading a thread on another forum about a Wilson 9mm that would not run with grease as well, but run 100% on oil. Well, from now on the EMP will run on oil only