Family Picture: Post your 10mm Toy(s) here - Page 3

Bullman · 07-25-2011, 15:16

My Dave Clements custom GP100 carry revolver with Badger rosewood boot grips.

My Smiths, 1066 and 1006. I am jealous of some of the others, I have always wondered what Smith and Wesson's DAO felt like, I would really kinda like to have me a 1086. I am hoping to hear back from Bad Man One before too long about getting a 10mm barrel made for my 4516, I could send it back to Smith and have something close to a 1086

Big Shrek · 07-25-2011, 15:53

There are many Glocks, but this 20-SF is MINE!

inspectorjj · 07-25-2011, 17:47

Quote:

Originally Posted by Big Shrek

There are many Glocks, but this 20-SF is MINE!

LOL, I only have one too. But it is MINE. So I am impressed by your photo because the most important part, is that you own it. Not that everyone doesn't own theirs, but it seems like that is your first, as is mine.

Bullman, that is one clean GP100. Definitely an extension of your reflexes.

Bullman · 07-25-2011, 19:17

Thank you sir.

I have been looking at all these Glock pictures and lusting though. I really need to get me a Glock 29, I have been saying it for years, but something always pops up in the way.

SDGlock23 · 07-26-2011, 19:16

Here is a few of my newest project, my G20L(sf). It's sits atop my G20sf frame. Lone Wolf slide, Lone Wolf 6.6" threaded barrel.

_The_Shadow · 07-26-2011, 19:35

SDGlock23, While that G20SF Longslide is really great looking like that, I bet that thing would be great shooter with a 9x25Dillon barrel also!

Thanks for the pictures!

bdhawk · 07-26-2011, 20:40

ok, here are my two 10MMs. G20sf and a S&W nightguard 310.

Burien · 07-26-2011, 23:52

Burien · 07-26-2011, 23:54

29 has slide stop ground down to stop accidental fat fingering / thumbing up, locking slide back mid shooting. KKM barrel and wolf 23lb spring

29sf is stock, and unshot, as of now... I will fix that this weekend

21Carrier · 07-27-2011, 03:24

Quote:

Originally Posted by SDGlock23

Here is a few of my newest project, my G20L(sf). It's sits atop my G20sf frame. Lone Wolf slide, Lone Wolf 6.6" threaded barrel.

When I get a G20, I will be building a longslide version. I bet you can get ridiculous velocities out of that thing. Like Shadow said, imagine the 9x25Dillon velocities!

SDGlock23 · 07-27-2011, 10:06

Yeah I may have to look into a 9x25 Dillon barrel for it. I do know that 13.5gr 800x using 135gr noslers will leave this thing at 1850 fps.

broncobuddha1 · 07-27-2011, 10:48

I'll play. Another CBOB owner here. Love it!

ModGlock17 · 07-27-2011, 11:30

Quote:

Originally Posted by SDGlock23

Yeah I may have to look into a 9x25 Dillon barrel for it. I do know that 13.5gr 800x using 135gr noslers will leave this thing at 1850 fps.

SD,

You took the cannon from the M1A1 Abrams tank and put it on an SF frame.

Hmm! I know what I want next. Thx.

Bullman · 07-27-2011, 11:52

Quote:

Originally Posted by SDGlock23

Yeah I may have to look into a 9x25 Dillon barrel for it. I do know that 13.5gr 800x using 135gr noslers will leave this thing at 1850 fps.

Man that is screamin. I need to start reloading again.

Burien · 07-27-2011, 12:16

Quote:

Originally Posted by SDGlock23

Yeah I may have to look into a 9x25 Dillon barrel for it. I do know that 13.5gr 800x using 135gr noslers will leave this thing at 1850 fps.

SDGlock23-

What primer are you using with this load? Loaded to 1.260 or 1.250", still "perfecting" my fast 135's any info would be great, thanks!

SDGlock23 · 07-28-2011, 20:16

Burien, I was using CCI 300's (LP) and loaded to 1.260".

DTGlock20 · 07-28-2011, 20:31

Mik,

Which RDS is that on your Glock 20 and are you pleased with it?

Thanks.

SDGlock23 · 07-29-2011, 16:22

Quote:

Originally Posted by broncobuddha1

I'll play. Another CBOB owner here. Love it!

Love that Cbob!! I have one in .45, but I remember seeing one of those locally for around $1300. I wish I had bought it!!

Burien · 07-29-2011, 17:57

Quote:

Originally Posted by SDGlock23

Burien, I was using CCI 300's (LP) and loaded to 1.260".

Excellent! I have some 135 gr Noslers to test up to 13.2 with 800x and LPM primers, I'll report back..

Mik · 07-29-2011, 18:04

DTGlock20: RDS is a very old Optima 2000. It still works and I still have it mounted on my G20. Way back in the day, I had a custom mount made up for it that had a rear blade. Worked well, but I found I didn't really use it, so I changed to a regular mount. Lowered the sight so I didn't bottom out the vertical adjustment.

_The_Shadow: Yeah, I was able to get My G20LS to run reliably. I had to do quite a bit of work though. The Extractor hole is not placed in the correct position, so that had to be rectified. The barrel was also very tight, and didn't allow rounds to feed reliably. I had to take some edges off the mouth of the chamber to get things to feed smoothly. I ended up using fairly light springs for regular/factor 10mm loads too. 14# and 15# weights. Everything runs now, but it was a bit of a project... but I did expect that. I think LW has things ironed out now, but the first run of the solid slides were definitely not "in spec".

Some very nice 10mms in this thread! I really really love the DW CBOB I have. It's very accurate, comfy to shoot, and the build quality is excellent. I recommend buying one if you come across one for sale.

Dave T · 07-30-2011, 14:12

I've owned several G20s, both 2nd Gen and a 3rd Gen. Right now the only 10mm Glock is this G20T-SF I put together. The slide was NP3ed and the barrel is a 5.3" StormLake.

I've been criticized for the Standard Dot 24/7 Express sights but they work fine in my experience, with my eyesight.

The other 10mm in my safe (and shooting rotation) is a very early (2 digit SN) Dan Wesson PM10B. It started with this fragile Millet rear sight

but the cross pin snapped in three places on the third trip to the range.

Sent the slide back to DW and they milled off the raised rib and replaced the Millet with their own version of the old BoMar low profile. The result looks better

and shoots better as well.

Like so many of you, I'm kicking around the idea of getting a G29SF or one of the 3rd Gen S&W 10mms. It is a very interesting cartridge.

Dave

***Angry Fist*** · 07-30-2011, 15:26

Quote:

Originally Posted by Dave T

The other 10mm in my safe (and shooting rotation) is a very early (2 digit SN) Dan Wesson PM10B. It started with this fragile Millet rear sight

but the cross pin snapped in three places on the third trip to the range.

Sent the slide back to DW and they milled off the raised rib and replaced the Millet with their own version of the old BoMar low profile. The result looks better

and shoots better as well.

Like so many of you, I'm kicking around the idea of getting a G29SF or one of the 3rd Gen S&W 10mms. It is a very interesting cartridge.

Dave

Very nice 1911!

Fedor · 07-30-2011, 20:12

Quote:

Originally Posted by Fedor

The Pearce + 0 extensions do make the Grip Perfect, I might just have to keep the 29SF.
It's the only Glock I have left, and I do feel it's the best model to own.

UPDATE:

Well guys, I just couldnt keep the 29SF. The grip was just all wrong, and the balance of it was all wrong...too top heavy.
It was just too darn blocky and thick.
I traded the 29SF today for this ergonomic little gem...

Brand New CZ P-06, the grip and feel of this pistol are Awesome.
Take it easy.

_The_Shadow · 07-30-2011, 21:25

That's not a 10! Pack it in! C Ya!

bac1023 · 07-30-2011, 21:30

Quote:

Originally Posted by _The_Shadow

Six of a kind...

Very nice Smiths