GlockTalk.com
Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.
Reply
 
Thread Tools Display Modes
Old 10-10-2012, 11:55   #1
Fire_Medic
CLM Number 261
Polymer Butcher
 
Fire_Medic's Avatar
 
Join Date: May 2008
Location: The Gunshine State
Posts: 8,145
If your Glock works, this isn't the thread for you.....

So with all the argumentative types as of late, most of the threads have been locked up. I don't care if you have a Glock that runs 100% (so do I), I don't care if you think I work for someone else that is a competitor of Glock, and I don't care if your feelings are hurt because other people's pistols are malfunctioning and you LOVE Glock because that's all you own.

I own a couple of Glocks, M&P's, rifles, a nice vintage BHP, etc. I have been shooting Glocks since 2008, and I have never once had ANY issue with ANY of my Glocks, until I purchased my Gen 4 G19 a few months ago.

The purpose of this thread is for those having issues to share information, that is all. This is not a debate, or a thread for people who shoot 100 rounds per year, or who can't even grip their pistol the correct way when they shoot. Once upon a time this was a great forum where people shared information and had intellectual conversations on their "differences of opinion", I can't say that has been much of the trend the last couple of years.

So enough with the BS, let's get down to it.

I own a G19 Gen 4, Serial number SVY***. It now has over 3,000 rounds through it since I purchased it a little over 3 months ago. After almost 2,000 rounds through the gun, I started getting pelted in the face with brass, brass would roll out of the ejection port and onto my right arm, and the brass started ejecting basically wherever it wants to. Left, Right, forward, back over me, back to my face, etc, etc.

I was pretty sure my pistol was good to go with the amount of rounds and no issues, and no sooner than I sell my "backup" G19 (Gen 3 G19, I know mistake on my part) to a family member who was in need of a new pistol, do the issues present themselves.

I use this G19 for CCW, Training classes, IDPA, local training nights, and just regular range trips on my own. It is not a safe queen. All of the rounds through this pistol have been through the aforementioned environments.

The changes I made to the pistol were the sights, the Ghost Rocket, G17 smooth trigger bar, Vickers mag release, and vickers slide stop. I also replaced the factory springs with Wolff factory weight springs, and the trigger spring is a 6# extra power spring. I basically do the same modifications to all my Glocks. I also did some grip work on it recently.

I called Glock last week and spoke to a tech and explained my issues, he sighed and asked me to send the gun in without us even discussing anything further, I was told my complaints are not new. I told him I would like to try and diagnose the issues I am having before just sending the pistol in, being that I am a certified Armorer he could send me the parts with no issue, and they were free of charge. We discussed what the "updated" parts were on my pistol, and I did already have the "043" RSA, and the "30274" ejector. When it was all said and done, he said I would get a new extractor, and a new RSA (because of the round count) and we would go from there. Well today the "new" parts arrived from Smyrna, and the extractor is the same "dipped" version as the one my pistol came with, and we already know I had the updated RSA, so I just got a newer one, as periodic maintenance.

I will be hitting the range tomorrow and getting some ammo down range, probably 200 rounds or so to see what happens with the new parts. Being that they're the same parts, "I" expect 1 of 2 things to happen:

1) The gun will shoot and eject exactly as it has been lately
2) It will be better for a while then go back to it's old ways

I am awaiting getting my hands on the Apex part, and I did put an order in with Glockparts.Com because on another forum someone shared that their new 9MM LCI extractors were non dipped, so hopefully I get an HRED setup from them along with a non dipped extractor to try out.

Edit to add: Extractor that came on the pistol is stamped with a "4" and the new replacement from Glock has a "2" stamped on it.

I have taken some pictures for the sake of illustration that I would like to share, I'm not saying anything is right or wrong, just posting pics.

Below are some pics of my old extractor after over 3K rounds through the gun:

General Glocking

General Glocking

General Glocking

Picture showing the old RSA I had which is the updated one:

General Glocking

Picture of the new "dipped" extractor installed in the gun:

General Glocking

And picture of the new RSA:

General Glocking

Thanks
FM
__________________
Florida Glockers Club #2250, BHP Club #2250, Niners Club #2250, G1 Niners Club #2250, Black Rifle Club #2250, S&W Club #2250, 40SW Club #2250


ΜΟΛΩΝ ΛΑΒE

RIP GioaJack!

Last edited by Fire_Medic; 10-10-2012 at 19:07.. Reason: adding extractor info
Fire_Medic is offline   Reply With Quote
Old 10-10-2012, 12:27   #2
captaintrips
Member
 
Join Date: Aug 2012
Posts: 69
I bought my brand new 29sf a month ago. I noticed as I hand racked the slide it would fail to return to battery about half the time. I called Glock and the gentleman said it should be fine once I started shooting it.

My first outing was last week. Out of 50 rounds it failed to return to battery 4 times. An 8% failure rate is unacceptable, maybe I should have saved $300 and bought a Taurus.....kidding.....but you get my point.

I called Glock again and the gentleman said he would send me a new recoil spring assembly. I asked if he thought that would work and he said "That's the first thing we try."

Not very comforting.....

I will let you know when it gets here.

Last edited by captaintrips; 10-10-2012 at 12:27..
captaintrips is offline   Reply With Quote
Old 10-10-2012, 12:29   #3
Fire_Medic
CLM Number 261
Polymer Butcher
 
Fire_Medic's Avatar
 
Join Date: May 2008
Location: The Gunshine State
Posts: 8,145
Quote:
Originally Posted by captaintrips View Post
I bought my brand new 29sf a month ago. I noticed as I hand racked the slide it would fail to return to battery about half the time. I called Glock and the gentleman said it should be fine once I started shooting it.

My first outing was last week. Out of 50 rounds it failed to return to battery 4 times. An 8% failure rate is unacceptable, maybe I should have saved $300 and bought a Taurus.....kidding.....but you get my point.

I called Glock again and the gentleman said he would send me a new recoil spring assembly. I asked if he thought that would work and he said "That's the first thing we try."

Not very comforting.....

I will let you know when it gets here.
Thanks for your input, will be interesting to see what happens with your pistol. I have a friend on another forum who's main issue (initially) with his Gen 4 was the recoil spring assembly, you could push the slide "forward" from the rear a good amount with just a finger, lol.

Keep us posted on what happens with your pistol.

FM
__________________
Florida Glockers Club #2250, BHP Club #2250, Niners Club #2250, G1 Niners Club #2250, Black Rifle Club #2250, S&W Club #2250, 40SW Club #2250


ΜΟΛΩΝ ΛΑΒE

RIP GioaJack!
Fire_Medic is offline   Reply With Quote
Old 10-10-2012, 12:39   #4
Dragoon189
Senior Member
 
Dragoon189's Avatar
 
Join Date: Feb 2012
Posts: 260
My 34 had the issue with less than 500 rds through it. I even tried hotter ammo and that just sent the brass at my face faster. Had the 336 ejector so I had that swapped and a new extractor for the heck of it and now with another 100 rds through it I look to be in the clear. No brass going anywhere but to the right for now. I love everything else about my gun so I hope that is the last I have to deal with it. I am very happy with the process I went through to get it fixed, the local armorer had it done very quick and painless.
__________________
"I ask, sir, what is the militia? It is the whole people, except for a few public officials." ó George Mason, in Debates in Virginia Convention on Ratification of the Constitution, Elliot, Vol. 3, June 16, 1788
Dragoon189 is offline   Reply With Quote
Old 10-10-2012, 12:44   #5
bac1023
Senior Member
 
bac1023's Avatar
 
Join Date: Sep 2004
Location: PA
Posts: 87,213
I'll stick to my older Glocks, thanks.
__________________
.

1911 Buyer's Guide
bac1023 is offline   Reply With Quote
Old 10-10-2012, 13:01   #6
xrmattaz
Senior Member
 
xrmattaz's Avatar
 
Join Date: Mar 2002
Location: prescott, arizona
Posts: 3,470


I would have left it stock.

I can't make my Gen 4 G17 fail....I've tried.
__________________
"it's hard to make a fed-proof holster that you can still get the gun out of" Bren
Matt
USN Corpsman '80-'86.
G17Gen4,G19,20SF,21SF,21Gen4,23Gen2,38,39
xrmattaz is offline   Reply With Quote
Old 10-10-2012, 13:14   #7
JBS
Senior Member
 
JBS's Avatar
 
Join Date: Apr 2012
Location: TX
Posts: 258
Quote:
Originally Posted by Fire_Medic View Post
I own a G19 Gen 4, Serial number SVY***. It now has over 3,000 rounds through it since I purchased it a little over 3 months ago. After almost 2,000 rounds through the gun, I started getting pelted in the face with brass, brass would roll out of the ejection port and onto my right arm, and the brass started ejecting basically wherever it wants to. Left, Right, forward, back over me, back to my face, etc, etc.FM
One thing that I don’t think has been addressed yet is the possibility of the extractor actually stretching to some extent after many cycles. If the gun runs for many hundreds of rounds and then starts to act up it has to be a wear part or an actual part failure and that would include the part loosing spec measurements by elongating. When you get your new part just for grins measure the distance between the claw and the anchor lug and see if your old one has gotten wider than the new one. Back in the 70s and early 80s the market had a bunch of import arms with parts that would bend or stretch after a few hundred rounds.
Attached Thumbnails
General Glocking - Click for larger version  
__________________
2 Corinthians 11:13-15

Last edited by JBS; 10-10-2012 at 13:14..
JBS is offline   Reply With Quote
Old 10-10-2012, 13:18   #8
Fire_Medic
CLM Number 261
Polymer Butcher
 
Fire_Medic's Avatar
 
Join Date: May 2008
Location: The Gunshine State
Posts: 8,145
Quote:
Originally Posted by xrmattaz View Post
I would have left it stock.

I can't make my Gen 4 G17 fail....I've tried.
Stock in what sense? The changes I have made to this pistol are the same as all my others, what does that have to do with anything? If the parts changed caused something then why don't my other Glocks have the same issues as this gun?
__________________
Florida Glockers Club #2250, BHP Club #2250, Niners Club #2250, G1 Niners Club #2250, Black Rifle Club #2250, S&W Club #2250, 40SW Club #2250


ΜΟΛΩΝ ΛΑΒE

RIP GioaJack!
Fire_Medic is offline   Reply With Quote
Old 10-10-2012, 13:19   #9
Fire_Medic
CLM Number 261
Polymer Butcher
 
Fire_Medic's Avatar
 
Join Date: May 2008
Location: The Gunshine State
Posts: 8,145
Quote:
Originally Posted by JBS View Post
One thing that I don’t think has been addressed yet is the possibility of the extractor actually stretching to some extent after many cycles. If the gun runs for many hundreds of rounds and then starts to act up it has to be a wear part or an actual part failure and that would include the part loosing spec measurements by elongating. When you get your new part just for grins measure the distance between the claw and the anchor lug and see if your old one has gotten wider than the new one. Back in the 70s and early 80s the market had a bunch of import arms with parts that would bend or stretch after a few hundred rounds.
I will get the dial caliper out later tonight when the household calms down a bit. That would be an interesting comparison.

Thanks for your input.
FM

Edit: I couldn't wait had to know, 0.455" on both parts the new and the old.
__________________
Florida Glockers Club #2250, BHP Club #2250, Niners Club #2250, G1 Niners Club #2250, Black Rifle Club #2250, S&W Club #2250, 40SW Club #2250


ΜΟΛΩΝ ΛΑΒE

RIP GioaJack!

Last edited by Fire_Medic; 10-10-2012 at 13:26..
Fire_Medic is offline   Reply With Quote
Old 10-10-2012, 13:28   #10
xrmattaz
Senior Member
 
xrmattaz's Avatar
 
Join Date: Mar 2002
Location: prescott, arizona
Posts: 3,470


Quote:
Originally Posted by Fire_Medic View Post
Stock in what sense? The changes I have made to this pistol are the same as all my others, what does that have to do with anything? If the parts changed caused something then why don't my other Glocks have the same issues as this gun?

Are you limp wristing?
__________________
"it's hard to make a fed-proof holster that you can still get the gun out of" Bren
Matt
USN Corpsman '80-'86.
G17Gen4,G19,20SF,21SF,21Gen4,23Gen2,38,39
xrmattaz is offline   Reply With Quote
Old 10-10-2012, 13:29   #11
Fire_Medic
CLM Number 261
Polymer Butcher
 
Fire_Medic's Avatar
 
Join Date: May 2008
Location: The Gunshine State
Posts: 8,145
Quote:
Originally Posted by xrmattaz View Post
Are you limp wristing?
I'm not even going to entertain anymore of your responses man.....

Your gun works, go away to one of threads of the guys with 100 rounds through their "perfect" gun.
__________________
Florida Glockers Club #2250, BHP Club #2250, Niners Club #2250, G1 Niners Club #2250, Black Rifle Club #2250, S&W Club #2250, 40SW Club #2250


ΜΟΛΩΝ ΛΑΒE

RIP GioaJack!
Fire_Medic is offline   Reply With Quote
Old 10-10-2012, 13:31   #12
curlysir
Senior Member
 
Join Date: Aug 2011
Location: NE Texas
Posts: 382
I am surprised that the extractor is the dipped version. I thought the non dipped was the latest and greatest for the 9mm. I replaced the extractor in my Gen 4 G17 with the non dipped version and have consistent ejections at 4 o'clock, much better then the original dipped. The last 2 I have ordered from Midway have been the non dipped. The ejector I just installed (from Midway) on my Gen 3 G22 was still dipped but was of much better quality then the stock ejector. Glock appears to have changed their method of manufacture.

I shot over 100 rounds yesterday chasing a failure to feed with the G22, appears to have been the RSA causing the problem.
__________________
Gen 4 - 17, Gen 2 - 19, Gen 2 - 20, Gen 3 - 22, Gen 4- 22, Gen 4 - 23, Gen 2.5 - 27

Last edited by curlysir; 10-10-2012 at 13:33..
curlysir is offline   Reply With Quote
Old 10-10-2012, 13:32   #13
Fire_Medic
CLM Number 261
Polymer Butcher
 
Fire_Medic's Avatar
 
Join Date: May 2008
Location: The Gunshine State
Posts: 8,145
Quote:
Originally Posted by curlysir View Post
I am surprised that the extractor is the dipped version. I thought the non dipped was the latest and greatest for the 9mm. I replaced the extractor in my Gen 4 G17 with the non dipped version and have consistent ejections at 4 o'clock, much better then the original dipped. The last 2 I have ordered from Midway have been the non dipped. The ejector I just installed (from Midway) on my Gen 3 G22 was still dipped but was of much better quality then the stock ejector. Glock appears to have changed their method of manufacture.
Yes I was surprised as well, I thought the non dipped version for the 9MM with the LCI was the latest version. Hopefully the one from Glock parts LLC will be the non dipped.

If not maybe I can get lucky enough to try the Apex part when they release the next batch of extractors.
__________________
Florida Glockers Club #2250, BHP Club #2250, Niners Club #2250, G1 Niners Club #2250, Black Rifle Club #2250, S&W Club #2250, 40SW Club #2250


ΜΟΛΩΝ ΛΑΒE

RIP GioaJack!
Fire_Medic is offline   Reply With Quote
Old 10-10-2012, 13:35   #14
xrmattaz
Senior Member
 
xrmattaz's Avatar
 
Join Date: Mar 2002
Location: prescott, arizona
Posts: 3,470


Quote:
Originally Posted by Fire_Medic View Post
I'm not even going to entertain anymore of your responses man.....

Your gun works, go away to one of threads of the guys with 100 rounds through their "perfect" gun.
I have 1800 rounds of nothing but the finest Russian Browm Bear through my Gen 4 G17, pay attention, man.
__________________
"it's hard to make a fed-proof holster that you can still get the gun out of" Bren
Matt
USN Corpsman '80-'86.
G17Gen4,G19,20SF,21SF,21Gen4,23Gen2,38,39
xrmattaz is offline   Reply With Quote
Old 10-10-2012, 13:35   #15
JBS
Senior Member
 
JBS's Avatar
 
Join Date: Apr 2012
Location: TX
Posts: 258
Quote:
Originally Posted by Fire_Medic View Post
I will get the dial caliper out later tonight when the household calms down a bit. That would be an interesting comparison.

Thanks for your input.
FM

Edit: I couldn't wait had to know, 0.455" on both parts the new and the old.
Well, check that off the list.
__________________
2 Corinthians 11:13-15
JBS is offline   Reply With Quote
Old 10-10-2012, 13:37   #16
Fire_Medic
CLM Number 261
Polymer Butcher
 
Fire_Medic's Avatar
 
Join Date: May 2008
Location: The Gunshine State
Posts: 8,145
Quote:
Originally Posted by xrmattaz View Post
I have 1800 rounds of nothing but the finest Russian Browm Bear through my Gen 4 G17, pay attention, man.
I believe you need to pay attention, as clearly the title of the thread escaped you completely, because you're posting in this thread and have a "non problematic" Glock.

I have other Glocks with no issues, so I'm only limp wristing the Gen 4?
__________________
Florida Glockers Club #2250, BHP Club #2250, Niners Club #2250, G1 Niners Club #2250, Black Rifle Club #2250, S&W Club #2250, 40SW Club #2250


ΜΟΛΩΝ ΛΑΒE

RIP GioaJack!
Fire_Medic is offline   Reply With Quote
Old 10-10-2012, 13:51   #17
molar
Senior Member
 
Join Date: Apr 2007
Location: TN
Posts: 384
Quote:
Originally Posted by JBS View Post
One thing that I donít think has been addressed yet is the possibility of the extractor actually stretching to some extent after many cycles. If the gun runs for many hundreds of rounds and then starts to act up it has to be a wear part or an actual part failure and that would include the part loosing spec measurements by elongating. When you get your new part just for grins measure the distance between the claw and the anchor lug and see if your old one has gotten wider than the new one. Back in the 70s and early 80s the market had a bunch of import arms with parts that would bend or stretch after a few hundred rounds.
My 19 had problems from the start, but I too, find it interesting that some guns don't develop the problem until a few thousand rounds are through the gun. One thing I found odd was that the spring loaded bearing and spring was a few mm shorter in my 19 than the one found in my 17. The odd part is that my 19 only had 500 rounds through it while the 17 has several thousand. I wonder if some of the EDP springs are defective and compress under load earlier. I know this would cause a loss of extractor tension, but what effect would it have on ejection and extraction?
molar is offline   Reply With Quote
Old 10-10-2012, 13:55   #18
Fire_Medic
CLM Number 261
Polymer Butcher
 
Fire_Medic's Avatar
 
Join Date: May 2008
Location: The Gunshine State
Posts: 8,145
Quote:
Originally Posted by molar View Post
My 19 had problems from the start, but I too, find it interesting that some guns don't develop the problem until a few thousand rounds are through the gun. One thing I found odd was that the spring loaded bearing and spring was a few mm shorter in my 19 than the one found in my 17. The odd part is that my 19 only had 500 rounds through it while the 17 has several thousand. I wonder if some of the EDP springs are defective and compress under load earlier. I know this would cause a loss of extractor tension, but what effect would it have on ejection and extraction?
I'm sure it would have a negative effect, especially since Apex saw it fit to provide a new spring with their extractors, and I know they did a lot of testing before hand.
__________________
Florida Glockers Club #2250, BHP Club #2250, Niners Club #2250, G1 Niners Club #2250, Black Rifle Club #2250, S&W Club #2250, 40SW Club #2250


ΜΟΛΩΝ ΛΑΒE

RIP GioaJack!
Fire_Medic is offline   Reply With Quote
Old 10-10-2012, 14:02   #19
xrmattaz
Senior Member
 
xrmattaz's Avatar
 
Join Date: Mar 2002
Location: prescott, arizona
Posts: 3,470


Quote:
Originally Posted by Fire_Medic View Post
I believe you need to pay attention, as clearly the title of the thread escaped you completely, because you're posting in this thread and have a "non problematic" Glock.

I have other Glocks with no issues, so I'm only limp wristing the Gen 4?
I always pay attention. The title of your thread had me giddy from the start.
__________________
"it's hard to make a fed-proof holster that you can still get the gun out of" Bren
Matt
USN Corpsman '80-'86.
G17Gen4,G19,20SF,21SF,21Gen4,23Gen2,38,39
xrmattaz is offline   Reply With Quote
Old 10-10-2012, 14:39   #20
GPBob
Member
 
GPBob's Avatar
 
Join Date: Jun 2012
Posts: 97
Fire Medic, you may have better luck with the White Sound depressor assembly than I did. My Gen 3 19 ejected BTFs with greater regularity using that part. It even gave me a BTF when inserted into my reliably ejecting 26.

I'm sending the White Sound back to Glockparts and exchanging it for a 40cal extractor.
GPBob is offline   Reply With Quote
Old 10-10-2012, 14:44   #21
Fire_Medic
CLM Number 261
Polymer Butcher
 
Fire_Medic's Avatar
 
Join Date: May 2008
Location: The Gunshine State
Posts: 8,145
Quote:
Originally Posted by GPBob View Post
Fire Medic, you may have better luck with the White Sound depressor assembly than I did. My Gen 3 19 ejected BTFs with greater regularity using that part. It even gave me a BTF when inserted into my reliably ejecting 26.

I'm sending the White Sound back to Glockparts and exchanging it for a 40cal extractor.
I would appreciate if you kept me updated here in this thread. I had read about your results, but I'm just experimenting to see what might work with "my"gun. I am really disappointed that the extractor from Glock was another dipped one, but oh well. Especially since another member today received one in the mail and it was a non dipped version.

Hopefully the one from glock parts is not the dipped one and it works for me.

IF not then the gun will go back to Glock (reluctantly) and I will see what they have to offer. I am simply trying to eliminate all the variables before sending it in, so that once it goes it's gone, and either they fix it, or send me a gun that works properly. Not send me my gun back with a note that says it's fine when it's not.
__________________
Florida Glockers Club #2250, BHP Club #2250, Niners Club #2250, G1 Niners Club #2250, Black Rifle Club #2250, S&W Club #2250, 40SW Club #2250


ΜΟΛΩΝ ΛΑΒE

RIP GioaJack!
Fire_Medic is offline   Reply With Quote
Old 10-10-2012, 14:46   #22
JBS
Senior Member
 
JBS's Avatar
 
Join Date: Apr 2012
Location: TX
Posts: 258
Quote:
Originally Posted by molar View Post
My 19 had problems from the start, but I too, find it interesting that some guns don't develop the problem until a few thousand rounds are through the gun. One thing I found odd was that the spring loaded bearing and spring was a few mm shorter in my 19 than the one found in my 17. The odd part is that my 19 only had 500 rounds through it while the 17 has several thousand. I wonder if some of the EDP springs are defective and compress under load earlier. I know this would cause a loss of extractor tension, but what effect would it have on ejection and extraction?
I have never been happy with the weight of the factory EDP spring. Before White Sound Defense started making heavy duty SST springs available we would make small spacer rings from brass tube that slipped over the bearing and caused the spring to compress a bit more. You may want to try the HD spring in combination with your Apex and see if that gets rid of your stove pipes or try your longer spring before you spend money on a WSD spring.
__________________
2 Corinthians 11:13-15
JBS is offline   Reply With Quote
Old 10-10-2012, 14:49   #23
mad220860
Senior Member
 
mad220860's Avatar
 
Join Date: Aug 2012
Posts: 153
And this is why I choose my glock 22 in gen 3!! Dont fix what aint broken.
mad220860 is offline   Reply With Quote
Old 10-10-2012, 14:58   #24
molar
Senior Member
 
Join Date: Apr 2007
Location: TN
Posts: 384
Quote:
Originally Posted by JBS View Post
I have never been happy with the weight of the factory EDP spring. Before White Sound Defense started making heavy duty SST springs available we would make small spacer rings from brass tube that slipped over the bearing and caused the spring to compress a bit more. You may want to try the HD spring in combination with your Apex and see if that gets rid of your stove pipes or try your longer spring before you spend money on a WSD spring.
Oh, I have lots of combinations to try out this Friday

1.) Apex extractor and non lci SLB
2) Modified OEM extractor
3) Cast non lci extractor and SLB from known good G26
4)Non-dip lci extractor and SLB from known good G17
5) Cast non lci extractor and SLB from Gen 2 22
molar is offline   Reply With Quote
Old 10-10-2012, 15:06   #25
voyager4520
-----
 
voyager4520's Avatar
 
Join Date: Apr 2009
Location: SE Colorado
Posts: 8,518
My Gen3 G27, NRR prefix ejected fine at first but at 200 rounds I and a relative noticed some spent casings going over my head. I thought nothing of it and just kept shooting until 300 when some were going straight up in the air then landing back on my arms or on the top of the slide. Then I inspected the spent casings and saw a big dent/scrape at the case mouths with corresponding brass dust and smearing on the lower ejection port of the slide. I tried different ammo, same results. I had kept some of the first spent casings fired through this gun and they did not have the dent/scrape. Once the ejection problem started, 98% of the spent casings had the dent/scrape at the case mouth and about 10% were either ejecting over my head or straight up in the air. The dents/scrapes at the case mouths are similar to my Paint drawing below:
General Glocking

My extractor was of the "MIM" flat top type and the claw became jagged, this must be really soft metal. I tried the extractor from my G23 which ejects fine(it's an older investment cast extractor), it eliminated most of the straight up ejections but not all, but it did not change the percentage of erratic ejections or casings with the dent/scrape. I tried a non-LCI 15 degree .40 extractor(also investment cast) with non-LCI SLB that I found in a local gun store, I had the same results as with my G23 extractor. I also tried a LWD .40 extractor which I later discovered to be a 9mm extractor, it of course made ejections much worse with some casings actually going downrange and to the left or over my left shoulder. I tried a new RSA, a new trigger housing w/1882 ejector, and they made no difference. I tried an HRED .40 EDP assembly, it made ejections more forceful but did not change how erratic they were.

I was considering reprofiling the 1882 ejector as JBarbaresi had successfully done to his 336 ejector with a rearward and slightly offset to the right angle to the face of the ejector when Glock released the new "Gen4" ejectors. I decided to wait and I'm glad I did. Before the new ejectors were available in the newest Gen4 trigger housings, another member of this forum tried a .40 28926 ejector in one of his guns and it made no difference, so he sent it to me. I removed the 1882 ejector from my Gen3 trigger housing and inserted the 28926 ejector. It fixed the ejection problem, I also used the non-LCI extractor as a replacement because I didn't trust the "MIM" one. All casings now eject to the right between 3 o'clock and 5 o'clock and there are no more dents/scrapes at the case mouths. There is a tiny scrape midway down the length of 50% of the casings as shown below in my Paint drawing:
General Glocking

I forgot to mention, with the 1882 ejector I compared some spent casings from my G23 and G27. The ejector marking on the 23 casings was low and left as it should be, but they were middle to high left on the 27 casings and sometimes the ejector even gouged the edge of the primer. The 28926 ejector leaves no marking that I can detect. I also noticed some pretty severe scoring of the muzzle end of the EDP, it seems to be rubbing against the opening in the slide pretty hard. My G23 EDP does not have such severe wear. I did not notice that wear on the HRED EDP but I only shot 100 rounds with it.
__________________
G23 G27

Last edited by voyager4520; 10-10-2012 at 15:15..
voyager4520 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 22:47.



Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 1,155
313 Members
842 Guests

Most users ever online: 2,244
Nov 11, 2013 at 11:42