Important Notice: The site is currently being upgraded to a new software system. This process could take a day or two to complete. During that time, we are going to leave the site up here, on its old software. WHAT GETS POSTED HERE DURING THIS TRANSITION WILL NOT BE COPIED OVER ONTO THE NEW SITE, WHEN THE UPGRADE IS COMPLETE. When we swap over, the content posted while this message is visible will be lost. We wanted to give you folks a place to hang out and talk while we worked though. We will let you know when we are finished. Please pardon the inconvenience, during this transition.

Home Forums Classifieds GT Store Blogs Today's Posts Search Social Groups


Glock Talk
Welcome To The Glock Talk Forums.

Thread Tools Display Modes
Old 01-25-2013, 21:20   #1
Senior Member
Join Date: Jul 2009
Location: Galt's Gulch
Posts: 106
Anyone Ever Use Cut Shotshells?

Saw these videos on Youtube. Never heard of this before but it sounded interesting

Then I saw this one:

Has anyone ever heard of cut shotshells or used them without blowing up a perfectly good shotgun? It seemed like a low-cost option to slugs; perhaps even low base/low recoil alternative. But the cost of slugs would be less than replacing my shotgun, especiallly if the feds outlaw them.
The very atmosphere of firearms anywhere and everywhere restrains evil interference. They deserve a place of honor with all that is good. George Washington
Jamesey is offline   Reply With Quote
Old 01-25-2013, 22:11   #2
Senior Member
VinnieD's Avatar
Join Date: Mar 2011
Posts: 1,202
This comes up from time to time. I've tried it myself, and it works in a pinch, but it's risky since the diameter of the cut shell is wider than your barrel, and thus is more likely to get stuck and cause overpressure. I wouldn't do it regularly. Wax slugs however are much safer since they're no wider than the shot cup.

Remember a few safety precautions. Only load custom loads like these directly into the chamber, do not put them in the tube as there is a risk of them opening up and spilling. Also always check to make sure your load entirely cleared the barrel every time you fire and that there are no obstructions left behind.
"Use more gun." -The Engineer- (Team Fortress 2)

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
VinnieD is online now   Reply With Quote
Old 01-25-2013, 22:30   #3
WoodenPlank's Avatar
Join Date: May 2010
Location: NW Florida
Posts: 7,958
This is probably the third or fourth thread on this in the past few months. Vinnie's post sums up my thoughts nicely.

At least the OP's location made me smile.
Never argue with an idiot. They will drag you down to their level and beat you with experience.
WoodenPlank is offline   Reply With Quote
Old 01-25-2013, 22:35   #4
Senior Member
Join Date: Mar 2012
Posts: 17,068
Here is another vote for listening to Vinnie,and let's kill the thread on GPs
countrygun is offline   Reply With Quote
Old 01-26-2013, 10:53   #5
CLM Number 245
Charter Lifetime Member
MarkCO's Avatar
Join Date: Dec 1998
Location: Colorado
Posts: 7,118
And a third "Listen to Vinnie".
Good Shooting, MarkCO
.40 S&W Club #1, 1911 Club #1067
NRA Life Member and Certified Instructor
MarkCO is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -6. The time now is 04:50.

GT Wiki
GT Blogs
Social Groups
GT Store

Users Currently Online: 585
145 Members
440 Guests

Most users ever online: 4,867
May 19, 2015 at 1:03