Home Forums Classifieds Blogs Today's Posts Search Social Groups



  
SIGN-UP
Notices

Glock Talk
Welcome To The Glock Talk Forums.

 
  
Reply
 
Thread Tools Display Modes
Old 07-18-2009, 12:53   #1
faawrenchbndr
CLM Number 281
The Dude Abides
 
faawrenchbndr's Avatar
 
Join Date: Nov 2005
Location: east of East St. Louis
Posts: 34,293
Wow,......thanks for that post!

THAT post now resides in the FAQ resource thread stickie: http://glocktalk.com/forums/showthread.php?t=1269683

Last edited by MarkCO; 09-30-2010 at 08:21..
faawrenchbndr is online now   Reply With Quote
Old 10-25-2009, 18:36   #2
1911Tuner
Senior Member
 
Join Date: Feb 2003
Location: North Carolina
Posts: 2,148
Quote:
Originally Posted by custom2 View Post
[B]
If anyone has any more info to share, please do.
Okie doke.

It's not the hammer movement that you should be concerned with. It's sear movement. If the sear can't move, neither can the hammer. The thumb safety doesn't block the hammer. It blocks the sear.

Watching to see if the hammer moves is difficult without a dial indicator...and it depends on which direction it moves as to whether the gun is deemed safe or unsafe. 1911 hammers with ordnance-spec hooks will move backward a couple thousandths of an inch before the hammer falls due to the undersquare cut. Also...ordnance-spec hammer hooks are long enough to allow .005 inch of sear movement and still pass the serviceability test because the undersquare hook geometry tends to pull the sear back into engagement rather than push it out if the sear moves. If they've been squared and shortened during a trigger job...only zero sear movement is acceptable.

To check for sear movement:

Cock the hammer and engage the safety. Pull the trigger firmly and release.
Place the safety in the OFF SAFE position and slowly overcock the hammer past full cock, being careful not to let it contact the grip safety. With your ear close to the side of the pistol...listen carefully for a light "click." If you hear that click...the thumb safety isn't blocking the sear properly. The click is the sound of the sear resetting to the bottom of the hammer hooks.

Test the grip safety in the same way...this time with the thumb safety in the OFF SAFE position. Grasp the pistol in such a way as to avoid depressing the grip safety...pull the trigger and release...overcock the hammer and listen for the click. If you hear it...the grip safey isn't blocking the trigger properly.
__________________
The 1911? Well...It ain't exactly a Swiss watch.
1911Tuner is offline   Reply With Quote

 
  
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -6. The time now is 15:57.




Homepage
FAQ
Forums
Calendar
Advertise
Gallery
GT Wiki
GT Blogs
Social Groups
Classifieds


Users Currently Online: 1,016
288 Members
728 Guests

Most users ever online: 2,672
Aug 11, 2014 at 2:31