Glock Talk Welcome To The Glock Talk Forums.
 |
08-30-2004, 01:02
|
#1
|
|
Senior Member
Join Date: Jul 2003
Location: Philippines
Posts: 211
|
Need comments on load
hi,
I was wondering if you guys can comment on my load for my 9mm
124gr Golddot
Speer once-fired nickel plated brass
5.6gr of VV N340
AOL of 1.142"
around 1200fps
Is it still safe to use considering that the brass is once-fired?
Thanks
|
|
|
08-30-2004, 02:18
|
#2
|
|
Senior Member
Join Date: Apr 2003
Posts: 679
|
Dale Rhea uses VV320 with same bullet weight.
Don't know what powder charge but he said just
enough to make minor PF.
I visually inspect ALL once-fired Glock brass
and throw away anything that looks like a skirt.
|
|
|
');
document.write(' ');
};
//-->
08-30-2004, 04:27
|
#3
|
|
Senior Member
Join Date: Jul 2003
Location: Philippines
Posts: 211
|
According to the VV loading data... maximum weight of the powder for that head is 5.8gr... Im worried because the brass i used was a once-fired nickel plated brass.
But I made sure it wasn't fired in a glock pistol
|
|
|
08-30-2004, 06:00
|
#4
|
|
Senior Member
Join Date: Oct 2003
Location: MESA, ARIZONA
Posts: 1,020
|
i shoot once fired brass up to four times no problems with it just inspect them when you case gauge pag may sablay..a trusty bullet puller will do...hodgdon also said the max to use on a 200g bullet for a 40SW is 3.8 i load mine up to 4.5 before of course to avoid pressure hinabaan ko oal ko.i used n340 on the 40 also its also good stuff kaso mas marami kailangan na powder than 320..just always check for pressure signs and make sure your not blasting your primers off..load safely
__________________
BOG # 1050
De gustebus non Despuntandum est
|
|
|
08-30-2004, 06:05
|
#5
|
|
Senior Member
Join Date: Oct 2003
Location: MESA, ARIZONA
Posts: 1,020
|
Re: Need comments on load
5.6gr of VV N340
AOL of 1.142"
miko,
sure ka ba sa powder load mo? medyo marami ata yan a... i just looked at my books i was making major at 4.8, 5 with n340 on my .40 sw loaded to 1.900 (180 and 200 heads) try to re chrono...just my 2 cents
__________________
BOG # 1050
De gustebus non Despuntandum est
|
|
|
08-30-2004, 06:16
|
#6
|
|
Senior Member
Join Date: Jun 2004
Location: TN
Posts: 1,510
|
that is a lot of powder, wonder what the primer looks like after you fore your loads. I would check again and be very careful.
__________________
formerly known as bulm5
|
|
|
08-30-2004, 06:36
|
#7
|
|
Moderator
Join Date: Nov 2002
Location: Dr. B. Eye
Posts: 9,525
|
that's standard vihtavuori load data for the N340 powder.
I sometimes use ammo loaded with 5.3gr N340 with 124gr FMJ heads and OAL=1.142 in. It chrono's around 1050-1100 fps out my pistol.
__________________
trigger happy!
|
|
|
08-30-2004, 06:44
|
#8
|
|
Senior Member
Join Date: Oct 2003
Location: MESA, ARIZONA
Posts: 1,020
|
nkakagulat lang kasi thats a lot of powder for such a small case and a short OAL...but then again i load 9 shorties to 9.2 of sp2 before ..imposible mag double charge;f ...parang scramble or snow cones;f ;f
__________________
BOG # 1050
De gustebus non Despuntandum est
|
|
|
08-30-2004, 07:51
|
#9
|
|
Senior Member
Join Date: Oct 2003
Location: MESA, ARIZONA
Posts: 1,020
|
nkakagulat lang kasi thats a lot of powder for such a small case and a short OAL...but then again i load 9 shorties to 9.2 of sp2 before ..imposible mag double charge;f ...parang scramble or snow cones;f ;f
__________________
BOG # 1050
De gustebus non Despuntandum est
|
|
|
08-31-2004, 03:07
|
#10
|
|
Senior Member
Join Date: Feb 2002
Location: Philippines
Posts: 5,075
|
Bigat siguro ng recoil nyan.. Last time nag N340 ako sa 40cal, yung recoil ng 150+PF ko sing lakas na nung 175+PF loads using N320.
I would think the 9 will also benefit from a fast powder like the 40 does. How about N320?
__________________
-- Clear your Mind of CAN'T --
*** "MULTIPLY" me :) ***
|
|
|
08-31-2004, 05:13
|
#11
|
|
Moderator
Join Date: Nov 2002
Location: Dr. B. Eye
Posts: 9,525
|
mc_o: that's true. Pag n340 powder gamit ko, the slide action is slower and muzzle rise seems higher. nawawala tuloy tiempo ko pagkalabit.
Here's a link for Timing drills
__________________
trigger happy!
|
|
|
08-31-2004, 05:20
|
#12
|
|
Senior Member
Join Date: Mar 2003
Location: Philippines
Posts: 6,624
|
When I swithced to a 9mm, sinabi ko sa reloader ko, kahit ano ilagay nya basta i wanted a 135pf.
It's a 9mm! Dont bother looking for the perfect load
|
|
|
|
Sponsored Links
|
Advertisement
|
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 18:34.
|
|
|