[julianz]

Last July a co-member at BPSC offered his second hand SPS for 55T php , physically didnt see the unit but turned down the offer coz i dont have the money at the time.

Did some surfing Re: SPS if i'm not mistaken this piece of work is from spain and the official distributor in PI is PB Dionisio.

What can you say about the SPS? is it the same caliber/standard as STI,SVI and Limcat.



thanks

[Eye Cutter]

its a copy of the S_I so it can't be sold in the US.

Sayang yung 55k. Judge got his pre-owned SPS for 90k last August!

I read in the BE Forums that the SPS and SVI grips interchange.

All other parts for the S_I are compatible

[batangueno]

55T lang ;P puedeng puede na yon. Maganda yung SPS di ba JuDGe. ;f sorry, i'm biased...hehe

[JuDGe]

Originally posted by batangueno
Maganda yung SPS di ba JuDGe.

^c

[mc_oliver]

Originally posted by batangueno
Maganda yung SPS di ba JuDGe. ;f sorry, i'm biased...hehe

Closet queen yata. Ayaw paarawan at ipa-hawak sa iba. ;f hehe

[Hermo Gut]

Julianz,

At 55T murang mura na. Kung naipost mo sa BOG baka nabili yon maski 60T, kumita ka pa.;f I for one would be interested at that price. OK yang SPS, maraming gumagamit na shooter parang STI/SVI ang dating.

[paltik45]

Just a reminder my freinds, kaunting ingat lang sa pag-bili ng S_I or SPS dyan sa atin. I've seen several fakes out there last December when I was there. One copy that I saw was reversed engineered from a costomer's pistol (hint). Pulido ang trabaho and the materials are made from 4140 steel and the guy was asking 20,000Php for the frame.

[Eye Cutter]

Paltik45: 20K! ang mahal pala nang gusto! Meron nag-aalok dati 15k naman. Gawa sa Malabon raw!

Pati SPS pini-fake rin so if you're getting a pre-owned SPS, verify the Serial No. with PB Dionisio

[PMMA97]

Originally posted by Eye Cutter

Pati SPS pini-fake rin so if you're getting a pre-owned SPS, verify the Serial No. with PB Dionisio

Is this a reliable way of figuring out if the unit is genuine? Paano kapag pati serial numbers ginaya? I'm having second thoughts on a Wilson being offered at 42T baka kasi pineke lahat.;g

[Eye Cutter]

No, it's not a guarantee. Kung pineke pati SN, i-verify mo pa rin name ng orig owner sa PB and tell them bec. you're being offered a 2nd hand SPS. Its your right to know kung orig or stolen yung item. Lalo na kung di mo kilala yung seller, paalam mo na kelangan verify mo with FED baka kasi stolen item or fake.

[Eye Cutter]

eto pa isang haka-haka about fake widebody 1911's! hindi lang mga frame pinepeke, pati mga internal parts!

meron akong kakilala na kaibigan rin ng world-class shooter natin, nagpabuo sa tatay nang modified pistol using all S_I parts.

After a few months, ayaw bumagsak hammer pag kinalabit trigger. Kala namin nag-ti-trigger freeze lang siya. Nang binuksan yung loob, meron gatla sa hammer and sear hooks! Yun pala, ang ginamit na mga S_I parts e peke!

[PMMA97]

Ansakit sa ulo ah! Buti na lang at madaming mapagtatanungan dito sa BoGs Bili na lang ako ng plastic Glock;f

[batangueno]

Originally posted by Eye Cutter
Pati SPS pini-fake rin so if you're getting a pre-owned SPS, verify the Serial No. with PB Dionisio

Sobra naman, kung sa bagay maganda naman talaga SPS...hehe ;f. Galing nga nung SPS frame from PB, yung serial number starts with PBD.

[mc_oliver]

Originally posted by Eye Cutter
After a few months, ayaw bumagsak hammer pag kinalabit trigger. Kala namin nag-ti-trigger freeze lang siya. Nang binuksan yung loob, meron gatla sa hammer and sear hooks! Yun pala, ang ginamit na mga S_I parts e peke!

Lalo na ngayon, mey mga naka CNC machines na raw dito. Haaay, pinoy talaga o...;f

[julianz]

Thank you very guys for all your opinions.

A shooter friend of mine from Pulilan shooters has warned me also about the fake parts, and boomers roaming around the islands and to tell you frankly that is also 1 reason why i didnt get that sps offered to me (pwede namang ipangutang kung gusto)so i end up getting a jericho which is a great pistol by the way.
Another reason as a newby never heared sa akin ang SPS.

For Doc EC you are right : i have read resently in SPS web page that majority of SPS part are interchangable with STI and SVI.

at 55K good deal nga yung offer then again di ko masyado kabisado kalikaw ng 1911/ clones.

However i sent an email to the gentlemen who offered the SPS , asking him if it is still available for grabs ..and for the BOG's interested i would also suggest to test the pistol and check with PB D kung hindi gawa sa likod ng bakuran
;f ;f

[mc_oliver]

Originally posted by julianz
...so i end up getting a jericho which is a great pistol by the way.

Dre, ano evaluation mo dito? Round count, parts wearing/breakage, etc? And ilan capacity ng factory mags? Thanks.

[batangueno]

Originally posted by mc_oliver
Dre, ano evaluation mo dito? Round count, parts wearing/breakage, etc? And ilan capacity ng factory mags? Thanks.

Aba parang balak mo talaga mag-production ha. ;f

[mc_oliver]

Originally posted by batangueno
Aba parang balak mo talaga mag-production ha. ;f

Nagtatanong lang, la kasi'ng thrill sa open, 'di ako nagma-mike...kapag gumana yung baril...;f;f

[ppts799]

Originally posted by batangueno
Aba parang balak mo talaga mag-production ha. ;f

maloloka na ako kay daddy_o!!!!!;9 ;9 ;9 ;9

why not use what the champion pareng dave uses... get a glock

1 100.00 1006.8602 150 Jerome Morales
2 98.37 990.4076 79 Resendo "Bogie" Castro
3 93.20 938.3875 140 Dino Ang
4 92.17 927.9733 42 Winston Amigochan
5 91.46 920.8862 137 Daniel Torrevillas
6 88.81 894.2196 138 Leonardo Gino
7 87.90 885.0383 80 Arnel Ariate
8 85.96 865.5273 110 Eric Cordero
9 84.36 849.3784 96 Bobby Lopez
10 81.71 822.7447 129 Eduardo Yao
11 80.76 813.1056 101 Harold Paylago
12 79.07 796.1463 31 Rey Ganaban
13 76.63 771.5358 116 Rommel Cabungcal

results of sept2-4 level 3. tsismis is, morales uses a glock. is this true???????? ang bibigat ng mga kalaban...

[ppts799]

ooops, nasagot na pala sa kabilang thread yung question ko

[julianz]

Originally posted by mc_oliver
Dre, ano evaluation mo dito? Round count, parts wearing/breakage, etc? And ilan capacity ng factory mags? Thanks.

i bought the pistol last july , after 100 rounds break in i join a local club shoot using reloads, very accurate , hits the target where i point it di man ako nakapasok sa finals di naman ako nagmukhang tanga compared sa mga veterans na nakasabay ko.

16 + 1 rounds capacity and as far as i know parts are not a problem sa magnificent di ba sir HermoGut.

[Valor1]

i saw an S_I clone in Manila Shooters gun Club near the US embassy. It also uses a grip with an "H&H" brand. They are selling the grip for P 6 thou and told me it also fits the S_I pistols. Anybody ever tried it or any thoughts?

[Hermo Gut]

16 + 1 rounds capacity and as far as i know parts are not a problem sa magnificent di ba sir HermoGut.

Correct ka diyan Sir.

[mc_oliver]

Originally posted by julianz
i bought the pistol last july , after 100 rounds break in i join a local club shoot using reloads, very accurate , hits the target where i point it di man ako nakapasok sa finals di naman ako nagmukhang tanga compared sa mga veterans na nakasabay ko.

16 + 1 rounds capacity and as far as i know parts are not a problem sa magnificent di ba sir HermoGut.

Thanks dre. Btw, meron ba after-market mags that can fit 17 or 18 rounds na pede sa jericho?

[ppts799]

Originally posted by mc_oliver
Thanks dre. Btw, meron ba after-market mags that can fit 17 or 18 rounds na pede sa jericho?

no problem ang stock sir, konting kikil at kalikot lang yan ;a ;f ;a ;f ;a ;f ;a