New Comp-Tac Leather Gun-belts

jbr3006 · 09-27-2006, 11:55

The Comp-tac Gun Belt

Made for the professional.
Finding a good polymer reinforced gun belt is not hard. Finding a reinforced gun belt that is cut on the
contour was only possible custom order until now.

What is contour cut?

Lay any belt you have been wearing for a while
flat and you will notice it has become curved.
It probably wasn't like that when you first got it.

Our belts feature a polymer insert sandwiched
between layers, glued and sewn in place to inner
lining to support the weight of a full size
service pistol and support gear.

These two features create the added benefit of
longer service life and keeping the pistol butt
closer to the body for higher concealment.

Belts are hand crafted, hand cut, dyed and finished.

No less than seven stitches to the inch. No four-per-
inch "Prison Stitching" here.

Tastefully designed to not be "Flashy" as to draw un-necessary attention for the "quiet professional".

The introductory price for these belts is $65.00 each.
Please call to order, or for more information.

Comp-Tac Victory Gear

Lifer · 09-28-2006, 07:34

Are they available with velcro for use with V-Clips?

jbr3006 · 09-28-2006, 10:02

It is not a standard option yet. I can apply Velcro to the belts but it will not be " Blind stiched ". You may want to call me at the shop.

Lifer · 09-29-2006, 09:24

Thanks
I have to make another order anyway so I will talk to you soon.
Lifer

cspd911 · 10-01-2006, 13:57

What is the largest size belt you offer?

jbr3006 · 10-02-2006, 07:57

Quote:

Originally posted by cspd911
What is the largest size belt you offer?

48" is the largest at this time.

madecov · 10-17-2006, 20:30

And when we they be on the web site?

Razoreye · 10-17-2006, 20:50

Looks great.

How should one measure the waist for this? Extra inch or two for movement, right? Are different widths available?

jbr3006 · 10-18-2006, 06:02

Quote:

Originally posted by madecov
And when we they be on the web site?

.

They should be up in the next few days.

jbr3006 · 10-18-2006, 06:06

Quote:

Originally posted by Razoreye
Looks great. How should one measure the waist for this? Extra inch or two for movement, right? Are different widths available?

Take your belt and measure from the tip of the buckle to the hole you are now using. 1.5" is the only belt width we are making at this point.

Razoreye · 10-18-2006, 08:29

Quote:

Originally posted by jbr3006
Take your belt and measure from the tip of the buckle to the hole you are now using. 1.5" is the only belt width we are making at this point.

Thanks. I'll definitely look into this.

(although I never got candy with my holster and everyone else is always mentioning it....)

jbr3006 · 10-18-2006, 09:05

(although I never got candy with my holster and everyone else is always mentioning it....)

We will fix that with your next order ( as long as you do not make Ms. Tammy mad ).

gary newport · 10-18-2006, 13:10

J.B., is the buckle held with snaps or "Chicago screws" so that alternate buckles can be used?

Yojimbo · 10-19-2006, 08:26

JB,

Is how wide are belts in the picture?

Thanks!

jbr3006 · 10-19-2006, 08:59

Quote:

Originally posted by gary newport
J.B., is the buckle held with snaps or "Chicago screws" so that alternate buckles can be used?

We use " Chicago Screws".

jbr3006 · 10-19-2006, 09:03

Quote:

Originally posted by Yojimbo
JB,

Is how wide are belts in the picture?

Thanks!

They are 1.5".

The Pontificator · 10-20-2006, 11:58

your web site doesn't mention belt widths nor min. or maximum lengths.

?????

jbr3006 · 10-20-2006, 12:17

Quote:

Originally posted by The Pontificator
your web site doesn't mention belt widths nor min. or maximum lengths.

?????

They are all 1.5" tapered to 1' in the front. During the order process you will be prompted to select lenght

GotGlk10mm · 10-26-2006, 20:27

Is it possible to get the belt 1.5" all the way around without a taper in the front? One black, one brown.

Thanks.

jbr3006 · 10-27-2006, 08:16

Quote:

Originally posted by GotGlk10mm
Is it possible to get the belt 1.5" all the way around without a taper in the front? One black, one brown.

Thanks.

Not yet but Gregg should have it going soon. I will post as soon as it is a go

goldshellback · 07-26-2007, 11:35

I want two of 'em! Now if I can pry the plastic from my wife's mit's

I'll get my order placed.

SawDuster · 08-14-2007, 20:05

Quote:

Originally posted by jbr3006
The Comp-tac Gun Belt

Made for the professional.
Finding a good polymer reinforced gun belt is not hard. Finding a reinforced gun belt that is cut on the
contour was only possible custom order until now.

What is contour cut?

Lay any belt you have been wearing for a while
flat and you will notice it has become curved.
It probably wasn't like that when you first got it.

Our belts feature a polymer insert sandwiched
between layers, glued and sewn in place to inner
lining to support the weight of a full size
service pistol and support gear.

These two features create the added benefit of
longer service life and keeping the pistol butt
closer to the body for higher concealment.

Belts are hand crafted, hand cut, dyed and finished.

No less than seven stitches to the inch. No four-per-
inch "Prison Stitching" here.

Tastefully designed to not be "Flashy" as to draw un-necessary attention for the "quiet professional".

The introductory price for these belts is $65.00 each.
Please call to order, or for more information.

Comp-Tac Victory Gear

Do you have this in a Ranger Style?

jbr3006 · 08-15-2007, 15:49

Quote:

Originally posted by SawDuster
Do you have this in a Ranger Style?

Unfortunately No Sir. You may want to check out Tucker Gunleather. J.B.